FieldproxyAI-native field service software

Dispatch and compliance

How do I make sure only qualified or certified technicians get scheduled on certain jobs?

Give every job type a list of required skills or certificates, give every technician a list of what they hold with an expiry date, and make the schedule compare the two before it lets you assign. The check has to be a block, not a warning, and it has to read the expiry date, otherwise a lapsed certificate keeps matching. Time limits such as PTO and weekly hours belong in the same check, so the board only offers people who are both qualified and available.

  • Skills sit on the job type and the technician. The job copies them at booking, so a later edit to the job type does not rewrite jobs already booked.
  • A certificate needs an issue date and an expiry date. A plain skill tag never expires on its own.
  • Most tools warn about a skills gap. Decide whether you want a warning or a hard block, and test it before you buy.
  • Put PTO, shift limits and weekly hours in the same check as skills, so the board never offers an unavailable person.
  • Keep an override, but make it a named person with a reason, and log it.

Book your demo

60 minute video call ยท Step 1 of 2: your details, then pick a time

Number of employees

This page covers matching people to jobs. It does not replace the licensing body or your insurer, and your own competence rules still decide who is safe to send.

Facts checked as of November 2026. Sources at the end of the page.

Step by step

How to schedule only qualified technicians, step by step

The pattern is the same in any system. The order matters: define the requirement first, then the proof, then the gate.

1. Write the list of skills and certificates once

Keep one list for the business, for example Safe work, General locksmithing, Crane inspection, Lockout/tagout authorized, EPA 608 Universal, Energy meters, Corporate care. ServiceTitan keeps skills as a business-defined list under Settings > Operations > Skills, and Dynamics 365 Field Service keeps characteristics, each typed as a Skill or a Certification.

2. Put the requirement on the job type

Each job type carries the skills it needs. A safe opening needs Safe work, a crane hoist inspection needs the inspector certificate, a meter visit for an energy client needs Energy meters. In ServiceTitan the skills are set on the job type under Settings > Operations > Job Types and copied onto each job when it is booked.

3. Put what each person holds on the technician

Add the skill or certificate to the technician or subcontractor record with an issue date, an expiry date and a copy of the document. Dynamics 365 Field Service adds an Issue Date and Expiration Date to a resource's characteristic through its Enhanced characteristics setting, which Microsoft labels a preview feature, not for production.

4. Let one-off jobs override the job type

Some jobs need more than the type says: a site that needs a gate induction, a client that wants a named engineer. Allow an extra requirement on the single job. ServiceTitan lets you add or remove skills for one job from the job's Skills dropdown.

5. Compare at the moment of assignment

The check should run when someone drags a job onto a technician, and again when the board auto-assigns. It should read three things: does the person hold every required skill, is each one in date on the job date, and are they free (no PTO, inside their hours).

6. Block, then allow a logged override

Choose the behavior on purpose. A hard block stops the assignment. A warning lets the dispatcher carry on. If you allow overrides, limit them to a manager role and record who, when and why.

7. Watch expiry before it bites

Run a list of certificates expiring in 60 and 30 days, and message the technician and their manager. A certificate that expires between booking and the visit is the case people miss.

Why it goes wrong

Why unqualified technicians still get scheduled

These are the failures buyers described on our calls, told by trade and size, not by name.

The rule lives in the dispatcher's head

A locksmith shop with road technicians and one dispatcher knows which two people are cleared for safe work. When the dispatcher is off, or a new one starts, a technician without that training gets the safe job. Nothing on the ticket said no.

Skills are tags, not certificates

A tag says a person can do something. It does not say the ticket lapsed in March. A crane inspection firm with about 20 technicians wanted skills and weekly-hour limits on the board for this reason: the qualification is a document with a date, not a label.

The check is a warning

ServiceTitan's skills page says you are notified of the skills gap when booking and alerted when assigning a technician. It does not say the assignment is blocked. Test the exact behavior in a trial before you rely on it.

A job type changes after the job is booked

In ServiceTitan, skills are copied from the job type at booking, and a later change to the job type does not affect jobs already booked. A new requirement can therefore be missing from next week's jobs unless someone edits them.

Technicians with no skills disappear

ServiceTitan's skills filter on the dispatch board shows only technicians who have the skill, and technicians with no skills assigned are filtered out. Anyone missed in the setup is invisible to the dispatcher rather than flagged.

Contractors sit outside the system

A risk inspection company with about 40 users, mostly contractor field agents, needs to send energy jobs to the agents cleared for energy and corporate care jobs to others. The agents are not employees, so their qualifications live in email and folders.

Ways to do it

Ways to enforce qualified scheduling

Four common approaches. What each one does with expiry and with blocking is the part that separates them.

ApproachWhat it does wellWhere it falls short
Spreadsheet matrix plus the dispatcher's memoryFree and fast to start. A grid of people against skills is easy to read.Nothing stops a wrong assignment. Dates go stale. No link to the job or the board.
ServiceTitan skills and Dispatch Pro tagsBusiness-defined skills on job types and technicians, copied to each job. The board groups technicians with the full skill set at the top and filters by skill. Dispatch Pro also uses tags and zones to decide who is eligible.The skills page mentions no expiry dates and describes alerts, not blocks. Dispatch Pro tags need Dispatch Pro, and the vendor notes marked both pages stale, so check them against your account.
Dynamics 365 Field Service characteristicsCharacteristics typed as Skill or Certification, rating models, and requirement characteristics on the work order tied to a resource requirement.Expiration Date only arrives with the Enhanced characteristics preview. The page does not say a mismatch blocks booking.
FieldproxySkills and certificates on the technician or subcontractor record, requirements on the job type, with the Dispatch agent matching on skills and certifications. Gates and limits are set to your rules.You define the rules with us at setup. If your rule is unusual, ask to see it working on your own job types first.

Vendor behavior as of November 2026, from the help pages linked in the sources. Features change; confirm in a trial.

A worked example

A worked example: 24 technicians, three job types

Say a crane and hoist inspection firm has 24 field technicians. Three job types matter: a routine hoist inspection, a load test, and electrical repairs on a control panel. The inspection needs the Inspector certificate, the load test needs the Inspector certificate plus Load test authorized, and the panel repair needs Electrical competent person.

Say 9 people hold Inspector, 4 of those hold Load test authorized, and 6 hold Electrical competent person. Two of the 9 inspectors have certificates that expire this month. On the day a rush load test comes in, the board should offer 4 people, not 24. Of those 4, one is on PTO and one has already booked 44 hours this week against a 45-hour internal limit, so the dispatcher sees 2, and the board shows why each of the other 22 is missing.

Now say one of the 4 has a certificate that expires Friday and the job is booked for next Tuesday. A system that only checks tags offers that person. A system that reads the expiry date against the job date does not, and the dispatcher gets a clear reason: expires before the visit.

Time limits

PTO, weekly hours and the law

Qualification is one filter. Availability is the other, and some of it is regulated.

PTO and shifts

Approved time off should grey out the person on the board for those days. A technician who is off should not appear as an option, even for an emergency, unless a manager lifts the block.

Weekly hours in the UK

In Great Britain the weekly limit is 48 hours on average, normally averaged over 17 weeks, and the period can be extended to a maximum of 52 weeks if agreed, for example by a trade union. Adults can opt out in writing. Under-18s cannot work more than 8 hours a day or 40 hours a week, and the limit cannot be averaged for them. On-call time at the workplace and job-related training count as work, so the board needs to count more than job hours.

A rolling total, not a weekly reset

Because the UK limit is an average, a weekly counter that resets on Monday hides the number that matters. Store hours per day and compute the rolling average, and treat your internal weekly cap as a separate, tighter rule.

Other countries

Rules differ by country and by contract. Ask your employment adviser for the limit that applies, and store it as a setting, not as a rule buried in the schedule.

Real requirements

What the requirement usually looks like in the US

Examples of qualifications that are real, tracked and checkable. Whether yours expires depends on the body that issues it.

QualificationWhat the source saysHow to store it
EPA Section 608 (refrigerants)Four types: Type I, Type II, Type III and Universal. EPA says the credentials do not expire. Technicians who maintain, service, repair or dispose of equipment that could release refrigerants must hold the right type. Apprentices are exempt only when closely and continually supervised by a certified technician.One certificate per person with the type and the card or file. No expiry, but keep the type so a Type I technician is not sent to a large chiller.
Lockout/tagout, authorized employee (OSHA 29 CFR 1910.147)Each authorized employee is trained in recognizing hazardous energy sources and the methods for isolating them. The employer must certify the training with the employee's name and dates. Retraining is required when job assignments change, when equipment or processes present a new hazard, or when an inspection shows gaps. The standard sets no fixed retraining interval and requires a periodic inspection of the procedure at least annually.Training date and trainer on the record. Add your own review date, for example a yearly one, and call it an internal rule.
General construction safety training (OSHA 29 CFR 1926.21)The employer must instruct each employee in the recognition and avoidance of unsafe conditions applicable to their work.A skill with a training date. Require it for any job type on a construction site.
State or local trade licenses (for example locksmith, electrical, plumbing)Issued and renewed by the state or city. Rules and renewal dates vary, so use the issuer's own record.License number, issuer, expiry and file on the technician. Show the license number on the quote and invoice if your state requires it.

Check each issuing body for the current rule. This table is a pattern, not legal advice.

Before you buy

What to check before you choose a tool

Good signs

  • A skill or certificate can carry an issue date and an expiry date, and the schedule reads the expiry against the job date.
  • A mismatch can be a block, a warning or a block with a logged manager override, and you choose which per job type.
  • Technicians and subcontractors share one skills list, so contractors are checked the same way.
  • The board explains why a person is missing: skill, expired, PTO or hours.
  • Auto-assignment uses the same rules as manual assignment.
  • A report lists certificates expiring soon, by person and by skill.

Red flags

  • Skills are free-text tags with no dates.
  • Skill gaps only produce an alert on a screen the dispatcher can close.
  • Changing a job type does not update jobs already booked and no one is told.
  • People with no skills recorded vanish from the filter instead of being flagged.
  • Contractors cannot be given skills, or need a paid seat to hold them.
  • Hours limits only count job time and ignore on-call and training time.

Fieldproxy setup

Setting it up in Fieldproxy

Fieldproxy configures the records, statuses and rules around your process. Field names and day counts below are examples; we set them to your jobs.

A skills and certificates list

One list for the business (e.g. Safe work, Crane inspector, Load test authorized, LOTO authorized, Energy meters, Corporate care). Each entry can be marked as a plain skill or a certificate that needs an expiry date.

What each person holds

Rows on the technician or subcontractor record with the skill, issue date, expiry date, document file and a reviewed-by field. A computed status (e.g. Valid, Expiring in 30 days, Expired) recalculates from the dates.

Requirements on the job type

Each job type lists the skills it needs. A job copies them when it is created, and you can add a requirement to one job.

Matching and the gate

The Dispatch agent (/agents/dispatch-agent) assigns by distance, skills and certifications, so it only proposes people who pass. Expired or missing requirements can be set to block assignment, with a manager override that is logged if you want one.

PTO and hour limits

Approved time off and a weekly-hour cap (e.g. 45 hours) are part of the same eligibility check, so the board offers only people who are free and within limits.

Expiry alerts

The Watcher agent (/agents/watcher-agent) flags certificates expiring soon, and a scheduled report from the Scheduler agent (/agents/scheduler-agent) lists them for the office each week. Subcontractors are checked the same way as employees.

How switching works

How switching to Fieldproxy works

We move your data over and set the system up to the way you already work. Fieldproxy replaces the old tool; it does not run alongside it.

  1. List your skills and who holds them

    Send us your current matrix, license list or spreadsheet, with expiry dates where you have them.
  2. Tell us which job types are restricted

    We attach the required skills to each job type and decide, with you, where it blocks and where it warns.
  3. We build it on your board

    Before you commit, the demo shows your people, your job types and a blocked assignment on your own data.
  4. Load the documents

    Certificates and dates come across with the technician records, so expiry alerts work on day one.

FAQ

Questions people ask

Can software block a technician who lacks a certificate?
Some can, and some only warn. ServiceTitan's skills page describes alerts about the skills gap when booking and assigning, and Dynamics 365 Field Service's characteristics page does not say a mismatch blocks booking. Ask each vendor to demonstrate an assignment being refused, then choose a block or a warning per job type.
Do skill tags expire?
A plain tag does not. You need a record with an issue date and an expiry date, and a check that compares the expiry to the job date. ServiceTitan's skills page mentions no expiry dates, and Dynamics 365 Field Service offers Expiration Date through a preview setting.
How do I keep PTO and weekly hours out of the way of dispatch?
Put approved leave and an hours cap in the same eligibility check as skills, so the board only lists people who are qualified and free. In the UK, the 48-hour limit is an average, normally over 17 weeks, so keep daily hours and compute a rolling average.
Does a refrigerant certification need renewing?
EPA says Section 608 technician certification credentials do not expire, but the type matters: Type I, Type II, Type III or Universal. Record the type so the right person is sent to the right equipment.
How often must lockout/tagout training be repeated?
OSHA sets no fixed interval. Retraining is required when job assignments change, when equipment or processes bring a new hazard, or when an inspection shows gaps, and a periodic inspection of the procedure is required at least annually. Many firms add their own yearly refresher; record it as an internal rule.
What happens when a technician is sick and several jobs need reassigning?
Reassign through the same check, so each job goes only to someone qualified and free. Pull the sick person's jobs into a list, filter by the required skill, and offer the top candidates. The Dispatch agent can propose the moves for a manager to approve.
Can subcontractors be checked the same way as employees?
Yes. Give subcontractors the same skills and certificates list, with their own expiry dates, and run the same gate. In Fieldproxy, subcontractors are managed alongside employees; see the subcontractor insurance page for the document side.
Do I need a manager override?
Usually yes, for emergencies. Keep it to a named role, require a reason, and log it, so the exception is visible in the next audit instead of hidden in a phone call.

Sources

Competitor details on this page come from the vendors' own pages and documentation, checked as of November 2026. Plans and prices change, so check the vendor's current page before you decide.

See it built on your workflow

Tell us how your jobs run today. We build a demo on your stages, forms and pricing before the call.