Compliance
What pesticide and fertilizer application records does a lawn care company need to keep?
For each application, keep the product name and EPA registration number, the amount and rate applied, the date (and in some states the time), the service address and area treated, the target pest, and the name and license number of the applicator, plus wind and temperature where your state asks for it. Commercial applicator record rules are set by each state, so the exact fields and how long you keep them come from your state lead agency: for example 3 years in New York and Pennsylvania and 2 years in Texas. Federal USDA rules cover only restricted use pesticides applied by certified private applicators, and some states, such as Maryland, also require records for lawn fertilizer.
- Your state lead agency sets the commercial applicator record rules. Read its rule, not a generic checklist.
- Core fields almost everywhere: product, EPA Reg. No., amount, rate, date, address, area, target pest, applicator and license number.
- Some states add more: Texas asks for start time, wind direction and speed, and air temperature.
- Retention varies: 2 years (federal RUP, Texas), at least 3 years (New York, Pennsylvania).
- The record is easiest to get right when the technician's app will not close the visit until it is complete.
This page is general information, not legal advice. Rules change and differ by state, county and license category, so confirm the current requirements with your state lead agency before you rely on any field list here.
Facts checked as of November 2026. Sources at the end of the page.
Step by step
How application recordkeeping works, step by step
Three layers of rules can apply to one lawn treatment: federal rules for restricted use pesticides, your state's pesticide rules for your license category, and in some states or counties, fertilizer and notification rules. Start by finding out which apply to you.
1. Find your state lead agency and your license category
Certification of applicators is run by the states, not by one national office. EPA says that all 50 states, DC, four tribes, six territories and five federal agencies administer certification programs for restricted use pesticide applicators. Your state agency (often the department of agriculture or environmental conservation) publishes the record rule for your category: commercial lawn, ornamental, structural or right of way.
2. Know the federal floor for restricted use pesticides
USDA's rule at 7 CFR Part 110 covers restricted use pesticides applied by certified private applicators. Each record needs the brand or product name and EPA registration number, the total amount applied, the location, size of area treated and the crop or site, the date, and the name and certification number of the applicator. It must be recorded within 14 days and kept for 2 years. Spot applications under one tenth of an acre on the same day have a shorter record.
3. Build the record around your state's field list
Take the field list from your state rule and make each item a field on the treatment record: product, EPA Reg. No., rate, total amount, target pest, site and address, area treated, date and time, applicator and license number, and weather where required. Products, rates and EPA numbers should come from a product list, not be typed fresh at each lawn.
4. Capture it at the property, before the visit closes
The technician fills the record on the phone at the lawn, while the label and the spreader or tank are in front of them. Fields your state requires are set as required, so the visit cannot be marked complete with a blank EPA number or no target pest.
5. Add fertilizer records where your state regulates them
Maryland's lawn fertilizer fact sheet lists the records to keep for fertilizer applications: applicator name, size of area fertilized, date, client address and location, application rate, total fertilizer used, fertilizer analysis, and an original or legible copy of the product label.
6. Handle notification and posting
Some places require notice before or after a lawn application. New York's neighbor notification law, which applies in counties and cities that adopted it, requires at least 48 hours prior written notice to neighboring properties for certain commercial lawn applications, printed in English and Spanish. Record that the notice went out, and when.
7. Keep, report and produce on request
Store records for the retention period your state sets, at the place it names (Texas asks for the principal place of business), and be able to produce them when an inspector asks. New York also requires an annual report by February 1 for the prior calendar year.
By state
What four states and federal rules actually require
Examples only, quoted from the rule text. Your state may differ, and these rules are amended, so read the current rule from your own state lead agency.
| Jurisdiction and rule | Who it covers | Required fields | Timing and retention |
|---|---|---|---|
| Federal: USDA, 7 CFR 110.3 | Restricted use pesticides applied by certified private applicators | Brand or product name, EPA registration number, total amount, location, size of area treated, crop or site, month, day and year, applicator name and certification number. | Record within 14 days. Keep 2 years. |
| New York: DEC, ECL 33-1205 (DEC policy OGC 3) | Commercial applicators and pesticide businesses | EPA registration number, product name, quantity of each pesticide, date applied, address including five digit zip code, dosage rate, method of application, target organisms. | Keep at least 3 years. Annual report on or before February 1 for the prior calendar year. |
| Pennsylvania: 7 Pa. Code 128.35 | Pesticide application businesses | Date (with hour completed for pesticides with a reentry restriction), customer name and address and site address if different, brand name, EPA product registration number, total amount, dosage or rate, names and certification or technician registration numbers of those applying or supervising. | Complete within 24 hours. Keep at least 3 years. Available to medical personnel in an emergency. |
| Texas: TDA, 4 TAC 7.33 | Commercial and noncommercial applicators, for every application regardless of use classification | Date, beginning time, person the application was made for, location, product name, EPA registration number, rate per unit, total amount per unit, target pest, site treated, total acres or volume treated, wind direction and velocity (outdoors), air temperature, method or equipment, applicator name and license number. | Keep current at the principal place of business. Keep 2 years. |
| Texas: TDA structural pest control, 4 TAC 7.144 | Structural pest control business licensees (TPCL) | Customer billing name and address, service address, pesticide names and EPA registration numbers, mixing rate and total amount (or active ingredient percentage and total), target pest or purpose, date, name and license number of each person applying or supervising, business TPCL number. | Keep 2 years at the business facility. |
| Maryland: lawn fertilizer law (MDA fact sheet) | Fertilizer applications by lawn care professionals | Applicator name, size of area fertilized, date, client address and location, application rate, total fertilizer used, fertilizer analysis, copy of the product label. | The fact sheet does not state a retention period. Ask MDA. |
Read in November 2026. New York, Texas and Pennsylvania rules were read as published rule text; check your state agency for the current version and for your license category.
Failure modes
Why application records go wrong
The record is written up at night, from memory
A tech treats 30 lawns and fills the log in the truck at the end of the day. Rates get copied from the last stop, and the start time is a guess. Pennsylvania wants the record completed within 24 hours, and Texas wants a beginning time for each application.
The EPA number is typed by hand
One digit wrong and the record points to a different product. When EPA numbers come from a product list set up once in the office, the tech picks the product and the number comes with it.
Weather is left blank
Texas asks for wind direction and velocity for outdoor applications plus air temperature. A paper form with an optional weather box gets skipped on busy days.
Area treated does not match the property
The lawn is 8,000 square feet in the customer record but the log says 5,000 because only the front was done, or the tech wrote the whole property when only beds were sprayed. The amount used should agree with rate times area.
Records live in three places
Paper logs in the truck, a spreadsheet in the office, and invoices in the billing tool. When an inspector or a customer asks what went down on one lawn last June, someone spends an afternoon looking.
Fertilizer is treated as not counting
In states with lawn fertilizer laws, the fertilizer visit needs its own record with rate, total used and analysis, even when no pesticide went down.
Options
Ways to do it
Five ways lawn and pest companies keep application records. For each, check whether the tech records it on the phone at the property, whether EPA numbers and rates come from a product list, and whether you can export what your state asks for.
| Approach | How the record is captured | Where it falls short |
|---|---|---|
| Paper log or a spreadsheet | Techs fill a printed form per lawn, or the office types logs into a sheet set up with your state's columns. | Retyped data, no check that every field is filled, and hard to search when an inspector asks about one property. |
| Chemical tracking (Service Autopilot) | Set up under Settings, then a chemical service is added to a one time, recurring, package or waiting list job. On the Legacy Mobile app the tech taps Log Chemical Usage, ticks the products used and can update weather. Logged chemicals appear on the Chemical Tracking report. | Its help center describes setup and the report in separate articles, so check your state's fields map to it before you rely on the default report. |
| Product usage report (RealGreen) | Products and amounts are set up in Parameters and recorded when production is posted. The Product Usage Report can print the applicator license number and the EPA number (if entered on the product), by tech, customer or date range. Its help also points to a New York Commercial Applicator's Report. | Usage comes from the amounts set up in Parameters at posting, so check how actual amounts and per-lawn details such as target pest and weather are captured for your state. |
| Chemical tracking (GorillaDesk) | Products are stored with name, manufacturer, EPA registration number, active ingredients and dilution rates. Techs record actual quantity, unit, application method, device, target pests and treated areas in the mobile app. Material use reports by date range, county or job, export to CSV or Excel. | This is from GorillaDesk's feature page rather than a help article, so ask to see weather capture and whether a visit can close with fields missing. |
| Chemical tracking (Jobber) | Available on select plans. Records chemical name and concentration, tank mixes, service address, job, applicator, date and time, weather and other details, with company and applicator license numbers set in Work Settings. Applications sort by date, client or applicator and download as CSV. | Jobber's help says there is no chemical tracking in the mobile app: chemicals are recorded from jobber.com, not by the tech at the lawn. |
| A configurable field service platform (Fieldproxy) | Your state's application fields are set as required fields on the treatment form in the offline mobile app, filled from a product library with EPA registration numbers and rates, and exported in the layout your state asks for. | Your record form is built during setup from your state's rule, so you need to bring that rule. It records what happened; it does not tell you which rule applies to your license. |
Vendor facts are from each vendor's own help or product pages, read in November 2026. Features and plans change, so check the linked page.
Worked example
A worked example: one treatment, one complete record
Say a lawn care company in Texas sends a tech to a 6,000 square foot front and back lawn for a broadleaf weed control round. The product label calls for 1.5 fluid ounces per 1,000 square feet, mixed in water. The tech starts at 9:40 am, wind is from the south at 6 mph and it is 72 degrees. Using the fields in TDA rule 7.33, the record looks like this.
| Field | Value | Where it comes from |
|---|---|---|
| Date and beginning time | Tuesday, 9:40 am | Phone clock at start of treatment |
| Customer and location | Customer name, service address | Job record |
| Product and EPA Reg. No. | Broadleaf herbicide, EPA Reg. No. as printed on the label | Product library |
| Rate | 1.5 fl oz per 1,000 sq ft | Product library default, tech can change it |
| Area treated | 6,000 sq ft | Property size, tech confirms |
| Total amount of product | 6 x 1.5 = 9 fl oz | Calculated from rate and area |
| Target pest | Dandelion, clover | Tech picks from list |
| Site treated | Residential turf | Tech picks from list |
| Wind and temperature | South, 6 mph, 72 F | Tech enters at the lawn |
| Method or equipment | Backpack sprayer | Tech picks from list |
| Applicator and license number | Tech name and TDA license number | User profile |
A worked example with made-up figures. The product is generic on purpose: use the EPA Reg. No. on your own label.
Date and time, customer, EPA number, rate, total amount and license number fill themselves from the phone, the job, the product library and the user profile. The tech picks the product, confirms the area, picks target pest, site and method, and enters wind and temperature. If any required field is empty, the visit stays open on the phone.
At month end the office exports the month's records with these columns. If the same company also worked in a state with a 3 year rule, it keeps every record for 3 years so one policy covers both.
Before you buy
What to check before you choose a tool
Good signs
- The technician records the application in the mobile app at the property, including with no signal.
- You can mark each of your state's fields as required, and the visit cannot close without them.
- Products carry EPA Reg. No., default rates and units, set once by the office.
- Total amount can be calculated from rate and area, and flagged when it does not match.
- Weather, start time and target pest are fields, not free text, where your state asks for them.
- Applicator license numbers come from the user profile, not typed per job.
- Every property shows its full application history in one place.
- Export matches your state's column list or annual report, with the date range and retention you need.
Red flags
- Chemical records can only be entered in the office, not by the tech in the field.
- The record is optional, so visits close with it blank.
- EPA numbers are free text on each job.
- The vendor says its report is 'state compliant' but cannot show you your state's field list.
- Records can be edited after the fact with no history of who changed what.
- Old records are deleted or archived before your state's retention period ends.
In Fieldproxy
Setting it up in Fieldproxy
Fieldproxy is set up around your own process, so the application record is a form built from your state's rule. Values marked e.g. are examples to replace with your own.
Product library
Each product holds name, EPA registration number, default rate and unit, and e.g. a link to the label. The tech picks a product and the number and rate come with it.
Required fields on the treatment form
The application form on the Android or iOS app has your state's fields as required: e.g. start time, area treated, amount, target pest, wind and temperature. It works offline and syncs when the phone has signal. A treatment cannot be marked complete until the record is filled. See job checklists for how required steps block completion.
Fertilizer as its own record
Where your state regulates lawn fertilizer, a fertilizer visit has its own fields, e.g. rate, total used and analysis, on the same form.
Per-property history
Every application is stored against the property, so the office can open one lawn and see each product, rate and date for as far back as you keep records.
Watcher agent on gaps
The Watcher agent flags treatments that were closed without a complete record, e.g. an edited record missing an EPA number, and properties with a fertilizer round in a blackout window you set.
Reports and export
A report lists applications in the columns your state asks for, filtered by date range, applicator or county, and exports for your annual report or an inspector's request. The Scheduler agent can email it to the office on e.g. the first of each month.
Getting started
Teams typically go live within a day of the setup call, and moving your customers, properties and product list over is free and assisted. Fieldproxy is one price per company with unlimited users, so every applicator gets a login.
How switching works
How switching to Fieldproxy works
We move your data over and set the system up to the way you already work. Fieldproxy replaces the old tool; it does not run alongside it.
Bring your state rule and your current log
Send us the record rule from your state lead agency and a filled page of the log you keep today. We map each required field.We build the product library and the form
Your products, EPA numbers and rates go in once. The treatment form gets your state's fields as required.Run one route side by side
A tech runs a day's route on the app while the old log is still kept, and you compare the two records.Switch over and export
Techs record on the phone from then on, and the office pulls the report your state asks for from one place.
FAQ
Questions people ask
- Do I need records for general use pesticides or only restricted use?
- It depends on your state. The federal USDA rule covers restricted use pesticides, but states can go further: Texas rule 7.33 requires records of each application regardless of use classification, and Pennsylvania and New York require records from commercial businesses for the pesticides they apply.
- How long do I keep pesticide application records?
- Your state sets it. Examples: 2 years for federal restricted use records and in Texas, at least 3 years in New York and Pennsylvania. If you work in more than one state, keeping everything for the longest period is the simplest policy.
- Is an electronic record on a phone acceptable?
- Check your state's wording. Pennsylvania's rule asks for the record to be completed in written or printable form within 24 hours and made available to the Department on request, so whatever app you use, make sure any record can be printed or exported quickly.
- Do I have to record the weather?
- Some states require it. Texas rule 7.33 asks for wind direction and velocity for outdoor applications and air temperature. Pennsylvania's rule 128.35 does not list weather. Recording it anyway costs a few seconds and helps if a drift complaint comes in.
- Do lawn fertilizer applications need records?
- In some states. Maryland's lawn fertilizer fact sheet lists applicator, area, date, client address, rate, total used, analysis and a copy of the label. Check whether your state or county has a fertilizer law.
- Do I have to notify neighbors before a lawn application?
- Only where a law requires it. In New York, counties and cities that adopted the neighbor notification law require at least 48 hours prior written notice to neighboring properties for certain commercial lawn applications, with exemptions such as granular products and spot treatments.
- Does field service software make me compliant?
- No. It captures and stores the record. Knowing which rules apply to your license and products is still on you and your state agency, and software should be set up from that rule.
Sources
Competitor details on this page come from the vendors' own pages and documentation, checked as of November 2026. Plans and prices change, so check the vendor's current page before you decide.
- eCFR mirror (Cornell LII): 7 CFR 110.3, restricted use pesticide records: https://www.law.cornell.edu/cfr/text/7/110.3
- EPA: Certification standards for pesticide applicators: https://www.epa.gov/pesticide-worker-safety/certification-standards-pesticide-applicators
- New York DEC: OGC 3, recordkeeping and reporting of commercial applicators: https://dec.ny.gov/regulatory/guidance-and-policy-documents/ogc-3-pesticide-recordkeeping-and-reporting-of-commercial-applicators
- New York DEC: Neighbor notification: https://dec.ny.gov/environmental-protection/pesticides/laws-regulations/neighbor-notification
- Pennsylvania Code 7 Pa. Code 128.35 (Cornell LII): https://www.law.cornell.edu/regulations/pennsylvania/7-Pa-Code-SS-128-35
- Texas Administrative Code 4 TAC 7.33 (Cornell LII): https://www.law.cornell.edu/regulations/texas/4-Tex-Admin-Code-SS-7-33
- Texas Administrative Code 4 TAC 7.144 (Cornell LII): https://www.law.cornell.edu/regulations/texas/4-Tex-Admin-Code-SS-7-144
- Maryland Department of Agriculture: Lawn fertilizer fact sheet: https://mda.maryland.gov/SiteAssets/Pages/fertilizer/Fertilizer-FactSheet.pdf
- Service Autopilot Help: Chemical Tracking overview: https://support.serviceautopilot.com/s/article/Chemical-Tracking-Overview-1730407298419
- Service Autopilot Help: Chemical Tracking on the Legacy App: https://support.serviceautopilot.com/s/article/Chemical-Tracking-on-the-Legacy-App-1730407298418
- RealGreen Help: Product Usage Report: https://customer.realgreen.com/webhelp/History_Reports_Product_Usage_Report.htm
- GorillaDesk: Chemical tracking software: https://gorilladesk.com/features/chemical-tracking-software/
- Jobber Help Center: Chemical tracking: https://help.getjobber.com/en/articles/chemical-tracking/