Quotes and approvals
How do I let technicians build quotes on site that a manager approves before the customer sees them?
Let the technician build the quote on the job from your price book, then hold it in a Pending approval status where it cannot be sent, printed or shown as a price until someone with authority approves it. Route by rule: routine quotes at list price under a set value approve themselves, and quotes over a value, under a margin, with a discount or on equipment under warranty go to a named approver with a time limit. Once approved, the customer signs on the phone or by link, and the approved lines become the job, the parts request and the invoice.
- The block that matters is on sending. An unapproved quote should have no customer link, no PDF and no signature screen.
- Auto-approve the routine: list price, no discount, under a set value. Send only the exceptions to a person.
- Warranty status comes from the asset record (install date, warranty end date), not from the technician's guess on site.
- Give the approval a clock, e.g. 15 minutes while the technician is still on site, then escalate.
- Simpro Premium shows the pattern: quotes must be approved before they can be sent, and each security group can approve up to a set value.
This page covers repair and extra-work quotes that technicians raise during a visit. Large project bids built by estimators are a different process. The regional notes are a summary of official pages, not legal advice.
Facts checked as of November 2026. Sources at the end of the page.
Step by step
How a technician quote moves from the site to an approved job, step by step
The steps are the same for a $180 lock cylinder and a $4,000 compressor. What changes is who approves and how fast.
1. Start the quote from the job
The technician opens the job and adds a quote there, so the customer, site and equipment are already filled in. The original job stays open with a status such as Quote needed; it is not replaced by the quote. BuildOps works this way for field findings: on a visit the technician taps the flag icon and selects Quotes Needed, and only a Name is required to log the recommendation.
2. Decide warranty before price
The equipment record answers this: install date, warranty end date, and what the warranty covers (parts only, or parts and labor). That sets the quote type: Warranty (no charge to the customer, cost claimed from the manufacturer), Out of warranty (chargeable) or Goodwill (chargeable, discounted by a manager).
3. Add lines from the price book
Parts, labor hours and assemblies come from your price book, so the technician picks items and quantities and does not type prices. What the technician can see and change is a permission question. ServiceTitan, for example, has separate technician permissions for Create Estimate, Sell Estimate, Edit Item Quantity, View Total Price and Edit service price.
4. Attach the evidence
Photos of the fault, the nameplate and one line on why the work is needed. The approver decides from this, without calling the technician.
5. Submit, and lock it
The quote moves from Draft to Pending approval. The technician can no longer change it, and nothing can be sent to the customer. Simpro has a Restrict Unapproved Quotes option that hides the Forms tab on quotes that are not yet approved, so the form cannot be sent or printed.
6. Let rules pick the approver
Typical rules: total value, margin, any discount, warranty type, and the customer's not-to-exceed limit. In Simpro the Approve Quotes permission sits on the security group, and a Limit lets that group approve only up to a set value. In HubSpot a standard approval can name up to 10 approvers for quotes that match your filters.
7. Approve, edit or reject with a reason
The approver works from a phone: approve, change a line (often labor hours) and approve, or reject with a reason that goes back to the technician. If nobody acts inside the time limit, the request moves up one level.
8. Show the customer
Only now does the customer see a price. On site, the customer signs on the technician's phone. In the Jobber app the technician taps Approve, the client draws a signature, and it appears on the quote PDF. Off site, the customer gets a link to approve.
9. Turn the approved lines into work
The accepted quote should create or update the job, raise the parts request, and later become the invoice with the same lines. Check this is switched on. In Housecall Pro the setting Automatically copy an approved estimate to a new job is off by default.
Why it goes wrong
Why technician quotes stall, leak margin or never get sent
These are the failures buyers described on our calls, told by trade and size, not by name.
One person writes every quote
A locksmith with road technicians, two shop staff and a dispatcher sends quotes only on Thursday afternoons, because one person can do them. A fault found on Friday is quoted six days later.
Approval blocks the small stuff too
The same locksmith asked whether technicians could add parts and labor on site without waiting for quote approval. If every extra cylinder needs a manager, technicians stop asking and the work is done unbilled or not done.
Quoting lives outside the job system
A commercial electrical contractor raising about 8 quotes a day builds estimates in spreadsheets, because its job system has no material lists. The team wanted to see cost and markup percentage while building a quote, and to edit labor hours before sending.
The job disappears when it becomes a quote
The same contractor asked whether a job could move to a quote-needed stage without losing the job. They tag jobs by hand as needs parts or waiting, and several people open the same job because nobody is sure who holds it.
Warranty is decided on the doorstep
An industrial and EV charger manufacturer needs its engineers to classify a call as warranty or out of warranty from the phone, then either request parts or raise a quotation. Without the install date on the record, the engineer guesses, and chargeable work is given away.
Nobody owns what happens after yes
A commercial HVAC and refrigeration contractor with 40 to 50 jobs a day asked a plain question: what happens after a quote is approved? If the answer is that someone notices and books it, approved work waits.
The client has its own limit
A commercial facilities maintenance firm with about 20 technicians works under client not-to-exceed amounts. It needs estimate approval thresholds, because a quote above the limit needs the client's approval as well as a manager's.
Ways to do it
Ways to handle technician quotes and internal approval
Seven real approaches. The difference is whether an unapproved quote is held, warned about, or simply sent.
| Approach | What it does well | Where it falls short |
|---|---|---|
| Technician reports, office writes the quote | The office controls every price. ServiceTrade's main flow is this: technicians record deficiencies with photos, video and audio, and office staff quote the repair and send it for one-click online approval. Technician quoting is a permission that can be turned on per user. | Speed depends on how many people in the office can write quotes. The customer is no longer standing next to the technician when the price arrives. |
| Jobber or Housecall Pro | Technicians quote and close on site. In the Jobber app a quote goes out through Review and Send by email or text, and a signature is collected on the phone. In Housecall Pro a Field Tech with the Add/edit jobs permission creates estimates in the field, and the customer approves in person or online. | Approval in these pages means the customer's approval. Jobber's quote statuses run Draft, Awaiting response, Changes Requested, Approved, Converted and Archived, with no internal step described. Housecall Pro's roles page lists no permission that makes an estimate wait for the office. Creating a quote in the Jobber app needs an internet connection. |
| ServiceTitan Sales Margin Control | Margin limits are set under Settings > Estimates > Sales Margin Control, globally or by role. In the Field Mobile App an estimate below the limit shows a warning icon with the exact dollar shortfall, and a Review Estimates prompt asks for a clear opt-in before it is shared. | The page calls it a soft block. It describes a warning the technician can pass, and it does not describe a manager approval step. |
| Simpro Premium quote approval | Quotes must be approved before they can be sent to the customer. You either approve all quotes automatically or set up an approval workflow. The Approve Quotes permission is set per security group with an optional value Limit, and Restrict Unapproved Quotes stops unapproved forms being sent or printed. | The threshold on the page is by value only. It describes no rule by margin, discount or warranty type. |
| BuildOps recommendations and mobile quotes | Technicians log a recommendation with priority, labor, parts and photos, and the office adds it to a new or existing draft quote. The quoting page says technicians can also build quotes on site, and that managers can approve or reject quotes before they reach customers. | The pages we read do not say how an approval rule is set up or which role approves. Ask to see it configured with your own thresholds. |
| CRM quote approvals, such as HubSpot | Approval rules on quote properties such as discount. The creator clicks Request approval and the quote moves to Pending approval. Approvers need the Approve quotes permission, and a rejection sends the quote back to be edited and resubmitted. | It needs Revenue Hub Professional or Enterprise, and the advanced approvals that can use quote amount need Enterprise. The CRM does not know the job, the equipment, the warranty or the van stock, so the technician works in two systems. |
| Fieldproxy | A quote on the job, built from your price book, with your own statuses and approval rules by value, margin, discount and warranty. A quote over the threshold pauses at send and lands in the approver's queue. Approvers are not extra seats, because pricing is one price per company with unlimited users. | The rules, the price book and the warranty fields are set up with you, so bring your thresholds and price list. It is not a CPQ tool for large configured bids. |
Vendor facts come from each vendor's help and product pages as read in November 2026. Plans and features change; check the linked sources against your own account.
A worked example
A worked example: eight quotes in a day, one in detail
Say a commercial electrical contractor's technicians raise 8 quotes a day. The rules are: auto-approve when the total is $500 or less, every line is at list price and margin is 35 percent or more. A supervisor approves up to $2,500. The service manager approves anything above $2,500, any discount over 10 percent, and anything under 35 percent margin. Anything on equipment under warranty goes to the warranty coordinator, whatever the value.
On one day, four quotes are small list-price repairs and approve themselves. Two fall between $500 and $2,500 and go to the supervisor. One carries a 15 percent discount the technician promised a regular client, so it goes to the service manager. One is on a gate operator installed 14 months ago with a 24 month parts warranty, so it goes to the warranty coordinator. Four people decisions, not eight.
Take one supervisor quote. A technician is at a self-storage site to fix a gate that will not open. The work order has a not-to-exceed limit of $750. The technician finds a failed keypad and cracked conduit. The quote has three lines. Keypad: cost $420, sell $630. Labor: 3 hours at $115, so $345, with a labor cost of $45 an hour, so $135. Conduit and fittings: cost $60, sell $96.
The total is $630 + $345 + $96 = $1,071. Cost is $420 + $135 + $60 = $615. Margin is ($1,071 - $615) / $1,071 = 42.6 percent. The margin passes, but the total is over $500, so the quote goes to the supervisor, and it is over the $750 limit, so the client must approve it too.
The supervisor looks at the photos and trims labor to 2.5 hours. The new total is $630 + $287.50 + $96 = $1,013.50. Cost is $420 + $112.50 + $60 = $592.50, and margin is $421 / $1,013.50 = 41.5 percent. Approved in nine minutes, while the technician is still at the gate.
The site manager signs on the technician's phone. The keypad is not on the van, so the approved quote raises a parts request, the job moves to Awaiting parts, and a return visit is booked for when the keypad arrives. The invoice later carries the same three lines. Nobody retyped anything, and the supervisor spent nine minutes on a $1,013.50 job instead of writing it from notes two days later.
Before you buy
What to check before you choose a tool
Good signs
- An unapproved quote cannot be emailed, texted, printed or signed. The block is in the system, not in a policy document.
- Rules can use value, margin, discount and warranty type together, and different roles have different limits.
- Quotes inside the rules approve themselves, so small work is not held up.
- The approver can edit a line and approve from a phone, and a rejection carries a reason back to the technician.
- A request that waits too long escalates to the next person.
- The technician can build the quote without seeing cost, or without seeing prices at all, if that is your policy.
- The accepted quote becomes the job, the parts request and the invoice with the same lines.
Red flags
- Approval in the product means only the customer's approval.
- A margin warning the technician can tap past, with no hold.
- One global on or off switch for approval, with no thresholds.
- Creating a quote replaces or closes the original job.
- Warranty is a free-text note, not a date on the equipment record.
- Each approver needs a paid seat, so you limit who can approve to save money.
Fieldproxy setup
Setting it up in Fieldproxy
Fieldproxy is set up around your own process, so the quote record, its statuses and its rules are yours. A typical setup looks like this.
A quote record on the job
The technician adds a quote from the job in the mobile app. Statuses, e.g.: Draft, Pending approval, Approved, Sent, Accepted, Declined. The job keeps its own status, e.g. Quote needed, so it never drops off the board.
Price book, margin floor and what technicians see
Quotes are priced from your own price book, with good, better and best options if you use them, and a margin floor the quote cannot drop below. Cost and markup can be shown to the roles you choose and hidden from technicians and subcontractors.
Warranty from the asset
Assets carry QR codes. The technician scans the unit, and fields such as install date and warranty end date, e.g., set the quote type to Warranty or Out of warranty. The Vision agent can read a nameplate photo to fill the model and serial number when the unit is not on record yet.
Approval rules that pause at send
Approval workflows hold a quote over your threshold before it goes to the customer, and discounts over your limit wait for a manager. Rules, e.g.: auto-approve up to $500 at list price, supervisor to $2,500, service manager above, warranty coordinator for any warranty quote. The AI cannot approve on anyone's behalf, and each decision is logged with who and when.
Approving from the queue
Waiting quotes appear in the Command Center approvals list with Approve and Reject. A rejection goes down its own branch, e.g. back to the technician with the reason. The Watcher agent can flag a quote that has sat in Pending approval for more than, e.g., 15 minutes and raise it to the next person.
Faster quote building on site
With the Voice agent the technician describes the fault and the parts needed, and the notes become structured quote lines to check before submitting. The mobile app works offline and syncs later.
After the customer says yes
The customer opens a link or signs on the phone. One click turns the signed quote into a job with the same lines, parts and price, and the invoice is drafted from what was done. If a repair runs over the work order's not-to-exceed amount, it waits for the customer's approval. Autopilot drafts the follow-up for quotes that were sent and went quiet, and a person approves it before it goes.
Accounting
Invoices sync to QuickBooks or Xero. In QuickBooks Online an estimate is a non-posting transaction until it is converted to an invoice, so approval steps in the field system do not disturb the books.
Regional notes
Selling extra work on site: consumer rules by country
These rules cover sales to consumers in their homes. Work for businesses is governed by the contract. They matter here because a technician who quotes extra work during a repair visit can step outside the repair exemption.
| Country | The rule | What it means for a technician quote |
|---|---|---|
| United States | The FTC Cooling-Off Rule gives a consumer until midnight of the third business day to cancel a sale of $25 or more made at their home. A visit the buyer requested to repair or maintain their personal property is excluded. | The exclusion stops at the repair. Additional goods or services, other than replacement parts necessarily used in the repair, are covered by the rule. Flag upsell lines so the right cancellation notice goes with the quote. |
| California | A service and repair contract is allowed only when the amount is $750 or less, the buyer initiated contact, the contractor sells nothing beyond what is reasonably necessary for the problem, and no payment is taken until the work is complete. A change order becomes part of a home improvement contract only if it is in writing and signed before that work starts. | A quote that takes the visit over $750 changes which contract form applies. Make $750 an approval threshold for residential work in California, and collect the signature before the extra work begins. |
| United Kingdom | Under the Consumer Contracts Regulations 2013, an off-premises service contract over £42 can be cancelled for 14 days. Urgent repairs the consumer specifically asked the trader to visit for are exempt, but services in addition to those repairs are not. | To start extra work inside the 14 days, the trader needs the consumer's express request on a durable medium. Without it the consumer bears no cost for the service. Capture that request on the quote signature screen. |
| Australia | For unsolicited consumer agreements of $100 or more, the consumer has 10 business days to cancel, and the seller cannot supply services or take payment in that time, except for electricity, gas or emergency repairs. | The ACCC page does not say whether extra work quoted during an invited visit counts as unsolicited. Take advice before technicians sell and start upgrades in the same visit. |
| Ontario, Canada | Contracts over $50 made in the home have a 10 day cooling-off period. Since March 1, 2018, furnaces, air conditioners, water heaters, water treatment devices and duct cleaning cannot be sold at the home unless the consumer initiates the transaction. | A business called out for a repair cannot enter a new contract for those products during the visit unless it has an existing contract with the consumer. The technician can only leave information. Block those quote lines on residential repair jobs in Ontario. |
Summaries of official pages read in November 2026. They are not legal advice, and state and provincial rules vary.
How switching works
How switching to Fieldproxy works
We move your data over and set the system up to the way you already work. Fieldproxy replaces the old tool; it does not run alongside it.
Send us your price list and approval limits
Who can approve what, by value, margin and discount, and how you decide warranty today.We build the quote step on your jobs
The quote record, statuses, the block before sending and the approval routing, shown on your own job types before you commit.Load equipment and warranty dates
Assets come across from your spreadsheets or current system with install and warranty end dates, so the quote type is set from the record.Technicians quote on the next visit
They pick lines from the price book on the phone. Approvers get the request in their queue, and the customer signs on site.
FAQ
Questions people ask
- Can technicians create quotes that route to a project manager for approval?
- Yes. The quote is built on the job, submitted, and held in Pending approval for the project manager assigned to that job or customer. Nothing reaches the customer until the manager approves, edits or rejects it.
- Can technicians add parts and labor on site without waiting for approval?
- Yes, if you set an auto-approve band. A common rule is that list-price lines under a set total need no approval, so a technician can add a part and an hour of labor and carry on. Only quotes outside the band wait for a person.
- Can warranty or out of warranty be decided from the engineer's phone?
- It should be decided by the equipment record, which the engineer opens on the phone. With an install date and warranty end date on the asset, the system sets the type, and the engineer either requests parts under warranty or raises a chargeable quotation.
- Can a job move to a quote-needed stage without losing the job?
- Yes. The quote should be a record attached to the job, and the job takes a status such as Quote needed. BuildOps handles field findings this way with a Quotes Needed flag on the visit. Avoid tools where converting to a quote closes the original job.
- Can the person building the quote see cost and markup, and edit lines before sending?
- That is a permission choice. Estimators and managers usually see cost and markup percentage on every line and can change labor hours. Technicians often see sell price only, or quantities only. ServiceTitan, for example, lists View Total Price and a gross margin display for estimates as separate technician permissions.
- What happens after a quote is approved?
- Two approvals happen. After the manager approves, the quote goes to the customer. After the customer accepts, the lines become a job or are added to the open job, parts are requested, the visit is scheduled, and the invoice is later drafted from the same lines.
- Do approvers need a paid user license?
- It depends on the vendor. Where pricing is per user, supervisors, warranty staff and project managers who only approve still need seats. Fieldproxy is one price per company with unlimited users, so anyone who needs to approve can have a login.
- Is a warranty repair always free to the customer?
- No. In the US, the FTC's guide says a warranty is full only if warranty service is free of charge, and a warranty that covers parts but not labor is a limited warranty. Record what each warranty covers on the asset, so labor is quoted when it is chargeable.
Sources
Competitor details on this page come from the vendors' own pages and documentation, checked as of November 2026. Plans and prices change, so check the vendor's current page before you decide.
- Simpro Help Guide: How to approve a quote: https://helpguide.simprogroup.com/Content/Service-and-Enterprise/Approve-a-Quote.htm
- ServiceTitan: Margin and discount enforcement in the Field Mobile App: https://help.servicetitan.com/release-hub/docs/protect-your-pricing-with-sales-margin-enforcement-to-stop-low-margin
- ServiceTitan Help: Field Mobile App technician permissions: https://help.servicetitan.com/docs/explanation-of-field-mobile-app-technician-permissions
- Jobber Help: Quote basics: https://help.getjobber.com/hc/en-us/articles/115009378727-Quote-Basics
- Jobber Help: Quotes in the Jobber app: https://help.getjobber.com/en/articles/quotes-in-the-jobber-app/
- Jobber Help: Quote approvals: https://help.getjobber.com/en/articles/quote-approvals
- Housecall Pro Help: Team member roles and permissions: https://help.housecallpro.com/en/articles/1073431-team-member-roles-permissions
- Housecall Pro Help: Estimates, approvals and signatures: https://help.housecallpro.com/en/articles/918072-how-can-my-customer-approve-their-estimate
- Housecall Pro Help: Automate job creation from approved estimates: https://help.housecallpro.com/en/articles/12119814-automate-job-creation-from-approved-estimates
- BuildOps Help: Recommendations: https://help.buildops.com/en/articles/10695268-recommendations
- BuildOps: Quoting: https://buildops.com/features/quoting/
- ServiceTrade: Quoting: https://servicetrade.com/products/servicetrade-platform/features/quoting
- ServiceTrade: Fire protection: https://servicetrade.com/industries/fire-protection/
- HubSpot Knowledge Base: Set up quote approvals: https://knowledge.hubspot.com/quotes/set-up-quote-approvals
- HubSpot Knowledge Base: Manage quote approvals: https://knowledge.hubspot.com/quotes/manage-quote-approvals
- QuickBooks: Create and send estimates: https://quickbooks.intuit.com/learn-support/en-us/help-article/job-estimates/create-send-estimates-quickbooks-online/L0kOXRjoP_US_en_US
- FTC: The Cooling-Off Rule: https://consumer.ftc.gov/articles/buyers-remorse-ftcs-cooling-rule-may-help
- eCFR: 16 CFR 429.0, definitions: https://www.ecfr.gov/current/title-16/chapter-I/subchapter-D/part-429/section-429.0
- FTC: Businessperson's Guide to Federal Warranty Law: https://www.ftc.gov/business-guidance/resources/businesspersons-guide-federal-warranty-law
- California Business and Professions Code 7159.10: https://leginfo.legislature.ca.gov/faces/codes_displaySection.xhtml?lawCode=BPC§ionNum=7159.10
- California Business and Professions Code 7159: https://leginfo.legislature.ca.gov/faces/codes_displaySection.xhtml?lawCode=BPC§ionNum=7159
- UK Consumer Contracts Regulations 2013, Part 3: https://www.legislation.gov.uk/uksi/2013/3134/part/3
- ACCC: Telemarketing and door-to-door sales: https://www.accc.gov.au/consumers/buying-products-and-services/telemarketing-and-door-to-door-sales
- Ontario: Door-to-door sales and home service contracts: https://www.ontario.ca/page/door-door-sales-and-home-service-contracts
- Ontario: Rules for businesses entering contracts at a consumer's home: https://www.ontario.ca/page/rules-businesses-entering-contracts-consumers-home
Related
Keep reading
- Turn inspection deficiencies into quotes
- Hide prices from technicians
- Track not-to-exceed limits on work orders
- Supplier parts prices on quotes
- What is the best field service software for a 5-10 person HVAC team?
- Cheaper ServiceTitan alternatives for small plumbing and HVAC companies, without payment processor lock-in