FieldproxyAI-native field service software

Termite and WDI inspections

How do I fill out NPMA-33 and WDI inspection reports in the field?

Fill the report on a tablet or phone from the job itself: company, license and property details come in pre-filled, the inspector records findings in the form's own sections (general information, findings, recommendations, obstructions and inaccessible areas, comments and attachments), adds photos and a graph of the structure as attachments, and signs with their license number. The app then produces the PDF in the official layout and sends it from the job to whoever ordered it, usually the agent, buyer or lender. Use the NPMA-33 unless your state requires its own form, as Florida (FDACS-13645), Texas, Louisiana (LPCA-143) and California (43M-41) do, and get the NPMA-33 itself only from NPMA or a provider NPMA has licensed, because it is copyrighted.

  • The NPMA-33 has five sections: general information, findings, recommendations, obstructions and inaccessible areas, and comments and attachments.
  • It covers termites, carpenter ants, carpenter bees and reinfesting wood boring beetles. Wood decay fungi go on a separate attachment.
  • Where a state mandates its own form and excludes others, use the state form. California, Florida, Texas and Louisiana are examples.
  • The NPMA-33 is copyrighted. Digital versions should come from NPMA-licensed software, not a scanned copy.
  • Do not edit an issued report. NPMA's guidance says later documentation goes to the lender, not into a changed report.

Book your demo

A video call with our team

Number of employees

This page is general information, not legal or lending advice. Forms, revisions and lender rules change, so confirm the current form with NPMA or your state pest control regulator before you rely on any field list here.

Facts checked as of November 2026. Sources at the end of the page.

Step by step

How to do a WDI report on a tablet, step by step

The report is short. What takes time is everything around it: typing the same company and property details again, drawing the graph, matching photos to findings, and getting the right PDF to the right three people. Each step below removes one of those.

1. Pick the right form when the job is booked

The property's state decides the form. NPMA's guidance says the NPMA-33 must be used for HUD/VA guaranteed transactions and is typically used for conventional ones, but where a state requires its own approved form and excludes others, the state form must be used. Set the form on the job type (e.g. WDI, Florida) so the inspector never chooses.

2. Pre-fill Section I from the job

Section I asks for the inspection company, address and phone, the company's pest control business license number (or "not required" where your state issues none), the date or dates of inspection, the full property address, the inspector's name, signature and license number, and the structures inspected, such as house and detached garage. All but the structures list should come from the job and the inspector's profile.

3. Record findings in Section II, with a photo per finding

Box A is no visible evidence; box B is visible evidence, and then at least one of three must be checked: live insects, dead insects or parts, frass, shelter tubes, exit holes or staining, or visible damage, each with a description and location. Take a photo at each location and tag it to the box it proves.

4. Write the recommendation in Section III

NPMA's guidelines say treatment or corrective action should be recommended when live insects are found, or when evidence is found with no documentation of treatment. If a bait system is installed and you cannot confirm the contract, the guidance suggests recommending treatment "unless there is a current baiting system service agreement in effect". Offer these as pick lists so wording stays consistent.

5. Mark obstructions and draw the graph

Section IV lists typical areas (basement, crawlspace and others) with a numbered key for what blocked them, such as stored boxes or paneled walls. Draw the structure outline on the tablet and mark findings, inaccessible areas and any bait stations, then attach it. Section V is where photographs, diagrams, previous treatment documentation and service agreement details with their expiration date are listed as attachments.

6. Sign, generate the PDF and lock it

The inspector signs on the device. The buyer and seller sign at closing, and NPMA says getting those signatures is not the inspector's job. Generate the PDF in the official layout, with page 2 consumer information, and lock it: if documentation turns up later, NPMA's guidance is to leave the report as issued and send the documentation to the lender.

7. Send it from the job and file it against the property

Email the PDF and attachments from the job to the contacts on it: the person who ordered it, usually the agent, plus the buyer, lender or closing office as instructed. Store it on the property record with the photos and graph, so the next inspection, a re-inspection or a lender call finds it in seconds. Florida requires the licensee to keep a copy for at least 3 years; Texas requires at least 2 years.

8. Turn box B into a treatment quote

When the report recommends treatment, the findings, linear footage and graph should feed a treatment quote or termite bond offer on the same property, sent while the agent still has the deal open. Keep the quote as a separate document: NPMA says damage evaluation or repair is a separate contract, noted as an attachment.

State forms

States that use their own form

NPMA lists Alabama, Arizona, California, Florida, Georgia, Hawaii, Louisiana, Maryland, Mississippi, Nevada, North Carolina, Oklahoma, South Carolina and Texas as states where the state form should be used, and notes that HUD may still require the NPMA-33 for HUD-insured loans in some cases. Four we checked against the state's own rule:

StateFormWhat the rule says
CaliforniaWood Destroying Pests and Organisms Inspection Report, form 43M-41The Structural Pest Control Board says the 43M-41 supersedes the NPMA-33 in California. A Branch 3 company may complete an NPMA-33 only as an attachment to its own 43M-41.
FloridaWood-Destroying Organisms Inspection Report, FDACS-13645, Rev. 05/21Rule 5E-14.142 says the licensee shall not place any disclaimers or additional language on the form. Section 482.226 adds a posted notice of inspection near the attic or crawlspace access and a 3 year copy retention.
TexasOfficial Texas Wood Destroying Insect Report, a form prescribed by the department4 TAC 7.176 says no alterations or revisions to the prescribed form are permitted. Larger graphs, photos or other support may be attached as an addendum. Copies go to the person who ordered it and the licensee's files, kept at least 2 years.
LouisianaWood Destroying Insect Report, LPCA-143 (or LPCA-143 A with an arbitration clause)Issued by a person licensed in termite control or a certified WDIR technician under one. It carries a guarantee to treat at no charge if live subterranean termites covered by the report are found within 90 days, and does not guarantee repair of damage.

Read in November 2026 from each state's rule or board. Revisions change, so check the regulator's forms page before you build or buy a template.

Failure modes

Why it goes wrong

The PDF filler is a copy nobody licensed

NPMA says the NPMA-33 is copyrighted and cannot be reproduced in whole or in part without its written consent; paper copies come from licensed printers and digital ones from licensed software companies. A scanned form saved on a laptop years ago is also likely to be an old revision. NPMA says a form with copyright 2019 in the footer is the current one.

The wrong form for the state

A company that works across a state line, or takes on a new territory, sends an NPMA-33 where the state form is required. In California that report alone does not satisfy the board.

Extra wording on a fixed form

Inspectors add a disclaimer or a sales line to the form itself. Florida and Texas both prohibit that, so the comments belong in the allowed comments area or an attachment.

The graph lives on paper

The diagram is drawn on a clipboard, photographed at an angle and attached as a blurry image, or not attached at all. Six months later nobody can tell where the shelter tubes were.

The report goes out late, or to the wrong person

The inspector finishes on site, but the office types it up at the end of the day and looks up the agent's email in an old thread. The closing date does not move for that.

The treatment quote never follows

Box B is checked, a treatment is recommended, and the quote is written days later, if at all. The buyer has already called someone else.

Options

Ways to do it

Ask each option four questions: is its NPMA-33 licensed, does it have your state's form, can the inspector draw the graph and attach photos on the device, and can it send the PDF from the job.

ApproachWhat it does for WDI reportsWhere it falls short
Paper forms or a fillable PDFLicensed printers sell paper NPMA-33 forms. A PDF is typed after the visit and emailed by hand.Nothing is pre-filled, photos and graphs are attached separately, and the copy may be unlicensed or out of date.
GorillaDeskSays it is licensed by NPMA to reproduce the digital NPMA-33, with reports built with photos, notes and signatures, a drawing tool for crawlspaces, foundations and infestation zones, and PDFs emailed to agents or homeowners from the property.Its NPMA-33 pages do not mention state forms such as FDACS-13645 or the Texas WDIR. Ask before you buy if you work in a state-form state.
PestPac (WorkWave)Says it gives access to NPMA-33, WDI/WDO and all state-specific forms in one place, and that termite reports are generated and sent from the job site.The page does not describe graphs or photos on the report. A larger platform priced and sold for bigger operations.
FieldRoutesSays it has termite inspection, warranty and renewal workflows with licensed access to NPMA-33, and a mobile app where technicians create diagrams.The page does not say which state forms are included. Check yours.
BriostackLists built-in, state-specific WDI/WDO forms for all 50 states among its compliance tools.The comparison page does not mention the NPMA-33 by name or describe diagramming. Ask to see your form filled in.
Home inspection software (Spectora, ISN, HomeGauge)Each documents an NPMA-33 template that pulls inspector license and signature from the profile and outputs a PDF in the form's layout. HomeGauge's Desktop Report Writer also lists official WDO forms for AZ, FL, GA, MD, NC, OK, SC, TX and WA.Built for home inspectors. Spectora warns not to edit the form's sections, and none of these runs termite treatments, bait station service or bond renewals.
A configurable field service platform (Fieldproxy)Your WDI form is built to the official layout of the state form you use, filled on the Android or iOS app (offline too) with photos, a graph and signatures. The PDF is generated in that layout and sent from the job, findings become a treatment quote, and everything is stored on the property.The form is set up for you during onboarding, not picked from a library. For the copyrighted NPMA-33 itself, confirm the licensing position with us, as you should with any vendor.

Vendor facts are from each vendor's own pages, read in November 2026. Features change, so check the linked page and ask for a filled-in sample of your state's form.

Worked example

A worked example: 3 inspectors, 40 real-estate WDIs a week

Say a pest control company has 3 inspectors doing 40 real-estate WDI inspections a week, about 13 each, mostly in one state that uses the NPMA-33 and a few across the line in a state-form state. Today each inspector writes on paper, and the office types the report into a PDF filler, attaches the photographed graph and emails it to the agent and lender.

StepPaper and PDF fillerFilled on the tablet
Company, license and property detailsTyped for every reportPre-filled from the job
Graph of the structureDrawn on paper, photographed, attachedDrawn on the device, attached to the PDF
PhotosDownloaded from the phone and renamedTagged to the finding as they are taken
Office time per report (example)20 minutes2 minutes to check and release
Office time for 40 reports40 x 20 = 800 minutes, about 13.3 hours40 x 2 = 80 minutes, about 1.3 hours
Report reaches the agentEnd of day or next morningBefore the inspector leaves the driveway

A worked example with made-up minutes. Time your own office for a week before you compare.

On those numbers the office gets back about 12 hours a week, close to a third of a full-time role. The larger gain is on the reports with findings. If 1 in 4 comes back with box B checked, that is 10 properties a week where a treatment quote can go to the agent the same day, built from the footage and graph the inspector already captured.

For the state-form properties, the job type picks that state's form instead, so the inspector does not have to remember which one applies.

Before you buy

What to check before you choose a tool

Good signs

  • The vendor can show you it is licensed by NPMA for the digital NPMA-33.
  • Your state's own form is available in its current revision, filled in, as a sample.
  • The PDF matches the official layout page for page, including page 2 consumer information.
  • Company license, inspector license and signature fill from profiles, not typing.
  • The inspector can draw the graph and tag photos to findings on the device, with no signal.
  • The report sends from the job to the agent, buyer and lender contacts on it.
  • Issued reports are locked and stored on the property with their photos and graph.
  • A recommended treatment can become a quote or bond on the same property in one step.

Red flags

  • A generic inspection report "in the style of" the NPMA-33 instead of the form itself.
  • No state forms, or an old revision of yours.
  • The office can edit a report after it has been sent, with no record of the change.
  • Photos and graphs live in a separate app and are attached by hand.
  • The tool needs signal to save the form at the property.

In Fieldproxy

Setting it up in Fieldproxy

Fieldproxy is set up around your own process, so the WDI report is a form, a PDF template and a few statuses configured for your account. Values marked e.g. are examples to replace with your own.

A job type per form

e.g. WDI (NPMA-33), WDI (Florida) and WDI (Texas), each carrying its own form and PDF template, so the state decides the report and the inspector never picks the wrong one.

The form on the technician app

The Android or iOS app works offline in crawlspaces and basements. Company and inspector license numbers fill from your settings and the inspector's profile, the property and ordering agent fill from the job, and photos and signatures are taken on the device.

Required fields that match the form's rules

e.g. if box B is checked, at least one of the three evidence boxes and a location are required before the report can be completed, and the structures inspected cannot be blank.

PDF in your official layout, sent from the job

The report is generated from your own template in the form's layout, with the graph and photos attached, and emailed from the job to the agent, buyer and lender contacts. Once sent, it is stored on the property record and locked.

Findings to a treatment quote

When a treatment is recommended, the findings and footage start a quote or termite bond offer on the same property. Autopilot drafts the follow-up to the agent or buyer, and a person approves it before it sends.

Watcher agent and Scheduler agent

The Watcher agent flags WDI jobs completed on site but not yet sent, and bonds coming up for renewal. The Scheduler agent emails the office a weekly list of reports sent, findings and quotes still open.

How switching works

How switching to Fieldproxy works

We move your data over and set the system up to the way you already work. Fieldproxy replaces the old tool; it does not run alongside it.

  1. Send us your blank forms and three real reports

    The current NPMA-33 or state form you use, plus three filled reports: one clear, one with findings, one with a graph. We build from those.
  2. We build your forms and PDFs

    Each form is set up on the technician app and its PDF in the official layout, checked against your real reports before you commit.
  3. We move your properties and history over

    Customers, properties, agents, past reports and active bonds come across with assisted migration, free. Nobody re-keys them.
  4. Inspectors go live

    Most teams are live within a day: inspectors get the app, the office sees reports arrive and go out from the job.

FAQ

Questions people ask

What is the NPMA-33?
It is the Wood Destroying Insect Inspection Report from the National Pest Management Association. It reports visible evidence of termites, carpenter ants, carpenter bees and reinfesting wood boring beetles on the date of inspection, and states that it is not a structural damage report.
Is the NPMA-33 required for FHA and VA loans?
NPMA's guidance says the NPMA-33 must be used for HUD/VA guaranteed transactions where a WDI report is needed, unless a state requires its own form, and NPMA says HUD may still ask for the NPMA-33 in some state-form states. Whether a report is needed at all depends on the loan and the lender, so ask the lender.
Can I fill out the NPMA-33 on a tablet?
Yes. NPMA says digital versions come from licensed software companies, so use one of those rather than a scanned copy. Look for pre-filled company and license details, photos and a graph on the device, and a PDF sent from the job.
Does the NPMA-33 cover wood decay or mold?
No. Wood decay fungi go on NPMA's separate Wood Destroying Organism attachment, which HUD and VA do not require nationally. California's 43M-41 covers organisms as well as insects.
Who signs the NPMA-33?
The inspector signs with their license number. The buyer and seller sign at closing, and NPMA says obtaining those signatures is the job of the realtor or closing firm, not the inspector.
Can I change a report after it has been sent?
NPMA's guidance is not to change the report when documentation, such as proof of a previous treatment, turns up afterward. Send that documentation to the lender or other parties instead.
How long must I keep WDI reports?
It depends on the state. Florida requires the licensee to keep a copy for at least 3 years and Texas at least 2 years. Check your own state's rule.

Sources

Competitor details on this page come from the vendors' own pages and documentation, checked as of November 2026. Plans and prices change, so check the vendor's current page before you decide.

See it built on your workflow

Tell us how your jobs run today. We build a demo on your stages, forms and pricing before the call.