FieldproxyAI-native field service software

Invoicing

How do I charge the right sales tax by state or job location on field service invoices?

Tax every invoice from the job site, not from your office: put the service address on the site record, tie a tax code to that site, and carry the site address onto the invoice as the ship-to address so your accounting system calculates from it. Then decide taxability per line by state and type of work, because the same repair can be fully taxable in Texas, taxed only on parts in another state and not billed with tax at all under a Florida real property contract. Keep an exemption certificate with an expiry date on every customer you do not charge.

  • The rate follows the job site. Texas says to collect local tax 'based on the location of the job site'.
  • The rate is the easy half. Whether labor, parts or the whole charge is taxable depends on the state and the type of work.
  • QuickBooks Online calculates from the invoice's Ship to address and falls back to your company address when it is blank.
  • No certificate on file means the customer is taxable. Store the form, the states it covers and the expiry date.
  • Agree the taxability table with your accountant once, then let the system apply it on every job.

Book your demo

A video call with our team

Number of employees

This page explains how to set the process up. It is not tax advice: which of your services are taxable in each state is a question for your accountant or the state revenue department.

Facts checked as of November 2026. Sources at the end of the page.

Step by step

How tax by job location works, step by step

There are two questions on every invoice. Which rate applies at this address, and which lines are taxable there. Software can answer the first one from an address. The second one needs a rule you write down once.

1. Make the site the taxed address

Each customer has a bill-to address and one or more site records. The site carries the full service address with ZIP code, county and state. Tax is worked out from the site, never from the bill-to address of a head office in another state, and never from your own office.

2. Build a taxability table by state and type of work

For each state, write down how each kind of work is treated: repair or maintenance of a building, new construction or capital improvement, repair of equipment that is not part of the building, parts sold without installation. For each one record whether labor is taxable, whether materials are taxable to the customer, or whether you pay tax on materials yourself and bill no tax. Most contractors need fewer than 10 rows per state.

3. Flag every line item

Each item in the price book is a type: labor, materials, equipment, trip charge, permit fee, subcontractor cost. The taxable flag on a line comes from the item type plus the state and work type of the job, not from a single tick box on the item. A labor line that is taxable in one state is not in the next.

4. Attach the rate to the site

Either a tax code or tax group is assigned to each site (state plus county plus city plus any district), or a tax engine looks the rate up from the address each time. With customers that have hundreds of sites, assign codes in bulk by ZIP code at import and review the exceptions by hand.

5. Record exempt customers with the certificate

An exempt customer has a flag, the certificate file, the certificate number, the states it covers and an expiry date. The exemption can apply to every site or only some. Without a certificate the customer is treated as taxable.

6. Send the site address to accounting

When the invoice syncs, the site address goes in the shipping address and each line carries its taxable or non-taxable code. If the accounting system recalculates tax, compare its total with yours and stop the invoice when they differ.

7. Report by jurisdiction

Returns are filed by state and often by county or city. Run a monthly report of taxable sales, exempt sales and tax collected per state and per local code, and tie it to the sales tax liability report in accounting.

How four states treat the same service call on a commercial building. Four states, read from each state's own guidance in November 2026. This is why a single taxable tick box per item does not work for a multi-state contractor. Rules have exceptions, so confirm each row with your accountant.

StateRepair work on a commercial buildingRate and location
TexasThe total amount charged for remodeling, repairing or restoring nonresidential real property is taxable, labor and materials. Labor to repair residential real property is not taxable, and neither is new construction labor.6.25 percent state tax plus up to 2 percent local, for a maximum combined rate of 8.25 percent. Local tax is collected based on the location of the job site.
FloridaUnder lump sum, cost plus, fixed fee, guaranteed price or time-and-materials real property contracts, the contractor is the final consumer of the materials, pays sales tax to suppliers and should not charge tax to the customer. Repairing tangible personal property is different: parts and labor are generally taxable.6 percent state tax plus a discretionary surtax that depends on the county. For a repair, the surtax is the rate of the county where the repair is done. On sales of tangible personal property the surtax applies only to the first $5,000 of the sales amount; the state's page says that cap does not apply to services.
New YorkRepair and maintenance work is taxable. The state's examples include replacing a thermostat on a hot water heater. A capital improvement to real property is not taxable, and the contractor should get a completed Form ST-124, Certificate of Capital Improvement, from the customer.State and local rates vary by where the work is done. The split between improvement and repair has to be recorded on the job.
CaliforniaConstruction contractors are the consumers of materials they furnish and install under a lump sum contract. They are the retailers of fixtures they furnish and install, and tax applies to the sale of the fixtures.7.25 percent statewide plus district taxes from 0.10 to 2.00 percent, so the total depends on the location.

Five states have no statewide sales tax (Alaska, Delaware, Montana, New Hampshire and Oregon), and 38 states allow local sales taxes, per the Tax Foundation's midyear 2026 report. In Colorado, some home-rule cities administer their own sales tax separately from the state.

Failure modes

Why it goes wrong

The office rate lands on an out-of-state job

A commercial electrical contractor doing 30 to 40 visits a day across several states, for customers with hundreds of sites each, put sales tax by location on its must-have list. The usual cause is the sync. QuickBooks Online calculates from the Ship to address on the invoice, and Intuit's help says that with no shipping address it uses the company's business address. An invoice that syncs with only a bill-to address gets the home state's rate.

The right rate is applied to the wrong lines

Teams get the rate from a lookup and then tax everything, or tax only parts everywhere. Texas taxes the total charge for repairing nonresidential real property, labor included. In Florida the contractor on a real property contract pays tax on materials and should not charge the customer tax at all. One default flag cannot be right in both.

Tax names do not match the accounting system

Jobber's help says it does not sync tax names and rates into QuickBooks, and that with automated sales tax on, the rate names and rates in Jobber must be set up to match QuickBooks. Every new county is a rate to create twice, and a mismatch stops the invoice.

The exemption lives in someone's memory

A school district or hospital is not charged tax because the office knows it is exempt. Nobody can find the certificate at audit, or it expired two years ago. Florida exemption certificates, for example, expire after five years.

Options

Ways to do it

What each kind of tool does, as its own help pages describe it in November 2026. The split that matters: does the rate come from the job site address on its own, and does taxability change by state and work type or only by item.

ApproachWhat it doesWatch for
QuickBooks Online automated sales tax on its ownCalculates from the Ship to address on the invoice and from the sales tax category of each product or service. A customer can be ticked as tax exempt with a reason for exemption. For invoices created by another app, lines are marked TAX or NON and a supplied total tax amount is honored.With no shipping address, QuickBooks uses your company address. Taxability comes from the item's category, so a labor item that is taxable in Texas and not elsewhere needs separate items or an override.
Field service software with rates you assign by handIn Jobber you create tax names and rates, group them, and can assign a rate to a client's property so it overrides the default. A product or service can be ticked as exempt from tax.Someone has to pick the right rate for every new site and update rates when they change. Jobber's help says it does not sync tax names and rates into QuickBooks, so they must be kept matching.
Tax zones by ZIP code (ServiceTitan)Each tax zone lists its ZIP codes, and that is how zones are assigned to customers. Pricebook items carry a Taxable box. A tax-exempt customer's record is set as Non-Taxable. Separate rates for labor and materials can be set up.A ZIP code can cross city or county lines, so zones need checking where rates differ inside one ZIP. Ask how separate labor and materials rates are switched on for your account.
Automatic rate from the service address (Housecall Pro)Housecall Pro's Automated Sales Tax works out the amount from the customer's service address and whether each line is marked taxable.Its help says it is available to accounts onboarded to its payments, estimates still use Price Book tax rates, and QuickBooks automated sales tax must be on before it can be activated.
A tax engine connected to the field service toolBuildOps sends the invoice's property address to Avalara for real-time tax, and a provider tax code on each item replaces the taxable checkbox. ServiceTitan's Avalara integration calculates tax on estimates and invoices from a tax code per pricebook item. Simpro uses Taxify with the verified site address and taxability codes. Avalara says it covers more than 12,000 US sales and use tax jurisdictions at rooftop-level accuracy and matches exemption certificates to customer codes.A second subscription, and every item needs the engine's tax code. BuildOps' article says exemption certificates are kept in Avalara, not BuildOps, and that quotes still use the old rate selector. With ServiceTitan's integration a job cannot be booked if Avalara cannot verify the address.
Field service software set up around your table (Fieldproxy)Sites carry the service address and a tax code read from your QuickBooks or Xero. The taxable flag on each line follows the rule you agreed with your accountant for that state and work type, and exempt customers hold their certificate and expiry date.Fieldproxy applies your rules and your accounting system's tax codes. It does not decide taxability for you, and it is not a rate lookup service for thousands of jurisdictions.

Vendor behavior changes. Ask each vendor to invoice one job in a state other than your home state, with one labor line and one parts line, and to show the same invoice after it reaches QuickBooks.

Worked example

A worked example

Say an electrical contractor with its office in Florida repairs lighting at three storage facilities in one week. Each job is $1,200 of labor and $800 of materials, $2,000 in total. The numbers are an illustration, and the treatment of your own work may differ.

Job 1 is in Texas, at a nonresidential building. Texas taxes the total charge for that repair. If the job site is in a city where the combined rate is the 8.25 percent maximum, the invoice carries $165 of tax on the full $2,000.

Job 2 is in Florida, and say it is done under a time-and-materials real property contract. The contractor is the final consumer of the materials, so it paid tax to the supplier when it bought them and the invoice to the customer shows no sales tax line. The tax paid on materials is a job cost, which belongs in the markup.

Job 3 is in New York. If it is a repair, such as replacing failed fittings, it is taxable at the rate for that location. If the same crew installs new site lighting that counts as a capital improvement and the customer signs Form ST-124, it is not.

Now the failure. All three invoices sync to QuickBooks Online with the customer's head office as bill-to and no shipping address. QuickBooks falls back to the company address in Florida and applies one Florida rate to all three. Job 1 is under-collected, Job 2 gets tax it should not carry, and Job 3 is wrong either way. With the site address in Ship to and a TAX or NON code on each line, the three invoices come out differently, which is the correct result.

Before you buy

What to check before you buy

Good signs

  • The rate comes from the site address or a tax code on the site, not from the customer's billing address.
  • Taxability can differ by state and by type of work for the same item.
  • Quotes and invoices use the same tax logic, so the approved total is the billed total.
  • An exempt customer has a certificate file, the states covered and an expiry date, and a warning before it lapses.
  • The site address is sent to QuickBooks as the shipping address, and a tax difference between the two systems stops the invoice.
  • One invoice can cover several sites with different rates, or the tool splits it and tells you.
  • There is a report of taxable sales, exempt sales and tax by state and local code.

Red flags

  • One default tax rate for the whole company, changed by hand on each invoice.
  • Taxable is a single tick box on the item, with no way to vary it by state.
  • Tax rates must be typed in twice, once in the field tool and once in accounting, with exactly matching names.
  • Only one tax rate can be applied to an invoice.
  • Exempt means someone deletes the tax line.
  • The vendor says the tax engine handles everything but cannot show where the work type is recorded.

In Fieldproxy

Setting it up in Fieldproxy

Fieldproxy is set up around your process, so the tax rules are configured to the table you and your accountant agree. Settings marked e.g. are examples to change.

Sites with their own address and tax code

Every job, quote and invoice links to a site under the customer that pays. The site holds the service address and a tax code (e.g. 'TX Houston 8.25'). Tax codes come from your QuickBooks or Xero, so the names always match. Sites are imported in the free, assisted migration, with codes assigned in bulk (e.g. by ZIP code) and exceptions listed for review.

Work type on the job

A required field on the job (e.g. Repair or maintenance, Capital improvement, New construction, Equipment repair, Parts only) drives the tax treatment together with the site's state. A job cannot move to (e.g.) 'Ready to invoice' until it is set.

Taxable flags from your table

Price book items have a type (e.g. labor, materials, equipment, trip charge). Your taxability table by state and work type sets the taxable flag on each quote and invoice line, so a technician building a quote on the phone gets the same answer as the office. See /solutions/custom-estimates.

Exempt customers with the certificate attached

The customer or site record holds an exempt flag, the certificate file, the number, the states covered and the expiry date. The Vision agent (/agents/vision-agent) can read a photographed or scanned certificate and fill those fields for a person to confirm. The Watcher agent (/agents/watcher-agent) flags certificates expiring soon (e.g. within 60 days) and any invoice with no tax for a customer that has no valid certificate.

The sync to QuickBooks or Xero

A completed or approved job becomes an invoice in your accounting system with its line items, labor, parts and tax, and the site address goes across with it. Accounts, items and tax codes are mapped at setup, and a batch of your own invoices from different states is checked line by line before go-live. Sync errors show on the job they belong to. See /integrations/quickbooks.

A check before anything is sent

Approval workflows can hold an invoice (e.g. any out-of-state invoice with zero tax, or any invoice where the site has no tax code) until finance confirms it. In the Command Center (/agents/command-center) you can ask for this month's invoices by state with taxable sales, exempt sales and tax, and the Scheduler agent (/agents/scheduler-agent) can email that report before each filing date. One price per company with unlimited users, so the bookkeeper and every project manager work from the same setup; see /pricing.

Other countries

Outside the US

Canada

The same idea applies with fewer rates. For services in relation to real property, the place of supply follows the province where the property is located. On the Canada Revenue Agency's rate table, HST is 13 percent in Ontario, 14 percent in Nova Scotia and 15 percent in New Brunswick, Newfoundland and Labrador and Prince Edward Island, and the other provinces and territories charge 5 percent GST. Provincial sales taxes are separate.

United Kingdom

For services relating to land, the place of supply is where the land is located. The bigger invoicing rule for trades is the VAT domestic reverse charge for building and construction services reported within the Construction Industry Scheme, which applies from 1 March 2021: the invoice must include the reference 'reverse charge' and must not include the VAT in the amount charged to the customer.

How switching works

How switching to Fieldproxy works

We move your data over and set the system up to the way you already work. Fieldproxy replaces the old tool; it does not run alongside it.

  1. Bring your states and three invoices

    The list of states you work in, your QuickBooks or Xero tax codes, and three real invoices from different states, including one you think was taxed wrongly.
  2. We set up your taxability table

    You and your accountant agree how each type of work is taxed in each state. We configure the work type field, the item types and the flags to match it.
  3. Sites and certificates come across

    Customers, sites with addresses, open jobs, price lists and exemption certificates move over in a free, assisted migration, with a tax code on every site.
  4. Test invoices, then go live

    A batch of invoices from different states is synced and checked against your accounting system line by line. Live within a day: technicians get the Android or iOS app and the office invoices from the job.

FAQ

Questions people ask

Can field service software handle different sales tax rates by state or location?
Yes, in one of three ways: a rate you assign to each site by hand, tax zones by ZIP code, or a tax engine that looks the rate up from the service address. Ask which one a vendor uses, and whether quotes use the same method as invoices.
Do I charge sales tax based on my office address or the job site?
For work done at the customer's location, states generally look to where the work is done or received. Texas says to collect local taxes based on the location of the job site, and Florida applies the surtax of the county where a repair is done. Confirm each state with your accountant.
Is labor taxable on a service invoice?
It depends on the state and the type of work. Texas taxes the total charge, labor included, for repairing nonresidential real property but not labor on residential repairs. New York taxes repair and maintenance but not capital improvements. That is why the job needs a work type field.
How does QuickBooks Online decide which sales tax rate to use on an invoice?
With automated sales tax, QuickBooks calculates from the Ship to address on the invoice. If there is no shipping address it uses your company's business address. So an invoice synced from a field service tool must carry the job site as the shipping address.
How should I handle tax-exempt customers such as schools, hospitals or nonprofits?
Get the certificate before you invoice without tax, store it on the customer record with its expiry date, and keep it. The Streamlined Sales Tax certificate, used by its 24 member states, relieves the seller of liability when a fully completed certificate is provided at the time of sale or within 90 days. Texas says to keep a resale certificate for four years.
Do I need Avalara or another tax engine?
Not always. A contractor working in a few states with a few hundred sites can assign tax codes to sites and keep them current. An engine earns its cost when you work across many local jurisdictions, add sites every week, or need certificates managed for you. The engine finds the rate; you still have to tell it what kind of work each line is.
Can one invoice cover sites with different tax rates?
Only if the tool carries tax per line or per site section. Some tools allow one rate per invoice and split the invoice by site instead. Either is workable, but find out which before you promise a customer one consolidated invoice.
Does field service software support multiple currencies and taxes for Canadian customers?
Check both separately. For tax, Canadian jobs need GST or HST by the province of the property, plus any provincial sales tax, as tax codes from your accounting system. Currency is a different setting; see our page on multi-currency field service.

Sources

Competitor details on this page come from the vendors' own pages and documentation, checked as of November 2026. Plans and prices change, so check the vendor's current page before you decide.

See it built on your workflow

Tell us how your jobs run today. We build a demo on your stages, forms and pricing before the call.