FieldproxyAI-native field service software

Job costing and billing

How do technicians submit expenses and receipts against a job for approval and client billing?

The technician photographs the receipt from inside the job on their phone, so the expense is created already tied to that work order, with an amount, a category, who paid and whether the client pays it back. A supervisor approves or rejects it before the job can be invoiced. Approval then sends the cost two ways: to payroll or accounting to repay the technician, and onto the client invoice at cost or with your markup.

  • Capture the expense from the job, not from a separate expense app, so the job number is never typed by hand.
  • Every expense needs two flags: who paid (company card, technician, petty cash) and whether it is billable to the client.
  • Approve before invoicing. A receipt that arrives after the invoice has gone is a cost you absorb.
  • Markup belongs to the category or the client contract, not to the technician's judgment on the day.
  • In the US, IRS Publication 463 asks for a receipt for lodging and for any other expense of $75 or more.

Book your demo

60 minute video call ยท Step 1 of 2: your details, then pick a time

Number of employees

This page covers job expenses that technicians pay for in the field. It is not tax advice, and it does not replace a payroll or expense system for office staff and company-wide travel.

Facts checked as of November 2026. Sources at the end of the page.

Step by step

How a field expense moves from receipt to invoice, step by step

The steps are the same whether the purchase is a $14 parking ticket or a $900 compressor part bought at a supply house counter.

1. Start from the job

The technician opens the job on the phone and adds an expense there. The job, customer and site are filled in already. Jobber's app does this from Quick Create > Expense with a Linked job field, and its web version adds expenses from the Costs section of the job.

2. Photograph the receipt

A photo is the evidence. Good tools read the merchant, date and total from the image so the technician only confirms them. Xero's phone app photographs the receipt and uses an Analyse step to extract the details, once an expenses admin has switched receipt analysis on.

3. Record five fields

Amount, date, category (materials, parking, tolls, lodging, permit, equipment rental, mileage), who paid, and billable or not. Jobber's expense form has a Reimburse to field for the who-paid question, plus an accounting code and a receipt image.

4. Submit, and set the status

The expense moves from Draft to Submitted. The technician can no longer edit the amount. If your rule says so, the job cannot be marked complete while an expense is still in Draft.

5. Route the approval by amount and category

A common rule: the supervisor approves up to a limit, a manager above it, and anything without a receipt goes back. ServiceTitan handles field purchases as purchase orders and offers PO Approval Tiers, where a user over their limit must submit the order for approval.

6. Post the cost to the job

Once approved, the expense counts in job cost. In Jobber, total job cost is line item costs plus labor plus expenses.

7. Repay the technician

If the technician paid, the approved amount goes to payroll, to the HR system, or to accounting as a bill to the employee. If a company card paid, there is nothing to repay; the receipt is matched to the card line instead.

8. Bill the client

A billable expense becomes an invoice line at cost or with markup. In QuickBooks Online Plus and Advanced, you tick Billable on the expense line, pick the customer, and the charge is offered through an Add to invoice option the next time you invoice that customer.

Why it goes wrong

Why field expenses get lost, paid twice or never billed

These are the failures buyers described on our calls, told by trade and size, not by name.

Receipts arrive by text message

A fencing contractor with nine subcontractor crews gets receipts texted to office staff. Nobody ties them to a job, so nobody knows what a job really cost against its budget.

Company cards with no job on the charge

A commercial electrical contractor gives every technician a card. The charge shows in the bank feed with a merchant and a total, and the bookkeeper has to ask who bought what, for which site. They wanted a mandatory expense step on the job for this reason.

The system only accepts inventory parts

A commercial facility management firm said its last tool could not record a plain $20 purchase. Every cost had to be a stock part or a purchase order raised first. Technicians stopped recording small buys at all.

Auditing becomes a job in itself

The same firm said it would need one person to audit expenses and another to audit timesheets. When capture and approval are separate from the job, checking takes longer than the work.

The claim goes to HR, the cost never reaches the job

An industrial and EV charger manufacturer pays field engineers' travel claims and advances through its HR system. The engineer is repaid, but the service call shows no travel cost, so warranty and paid visits look equally profitable.

The invoice goes out first

A commercial facilities maintenance firm bills retail clients per work order. If a hardware store receipt surfaces a week after the invoice, the client has already been billed and the cost is absorbed.

The same material is counted twice

Jobber's job costing page warns of a double count when the same material is both a line item with a cost and an expense. Decide which record holds the cost.

Ways to do it

Ways to handle technician expenses on jobs

Five real approaches. The difference is where the job link, the approval and the rebilling happen.

ApproachWhat it does wellWhere it falls short
Texted photos and a spreadsheetNo cost and no training. Works for a handful of receipts a month.No job link, no approval record, no rebilling. Receipts are lost in message threads.
An expense app such as Expensify, exported to QuickBooks OnlineReceipt scanning, a billable setting that can default on or off, and approval modes from Submit and Close up to multi-level Advanced Approval. Customers and projects from QuickBooks are applied to an expense as tags.The technician picks the customer by hand, in a second app. The billable flag exports to QuickBooks only on vendor bills and checks, and the field service job never sees the cost.
Jobber expensesExpenses on the job from web or app, with a Reimburse to field and a receipt image. Expenses count in job costing on the Grow and Plus plans. Reading several receipt photos with AI needs the Plus plan or the Bookkeeping add-on.The expenses pages describe no approval step and no way to bill the expense to the client. Job costs are described as internal. Reimbursement is marked paid under timesheets as record keeping only.
Housecall Pro job inputs and Expense CardsMiscellaneous job inputs such as permits, parking and rental fees are entered on the job on web and mobile. Technicians add receipts to purchases made on its own Expense Cards from Expense History in the mobile app.Job inputs do not affect the invoice or the job price. Receipts attach to Expense Card purchases, so a technician's own card or cash is outside that flow.
ServiceTitan purchase orders from the jobThe technician adds a purchase order from the job in the mobile app with a vendor, a vendor invoice number and a receipt photo, and a permission can make the photo required on purchase order types that are received automatically. Approval tiers hold orders over a user's limit.It is a purchasing flow built for parts from vendors. Parking, tolls, lodging and mileage do not fit a purchase order well, and the pages we read describe no markup on rebilling.
FieldproxyAn expense record on the job with your own categories, statuses and approval rule. The Vision agent reads the receipt photo and fills the record. Billable lines flow to the invoice under the markup you set.The categories, limits and markup rules are set up with you, so bring your expense policy. Repaying staff still happens in your payroll or HR system.

Vendor facts come from each vendor's help pages as read in November 2026. Plans and features change; check the linked sources against your own account.

A worked example

A worked example: one service call, three expenses

Say a refrigeration technician attends a restaurant on a work order with a not-to-exceed limit of $600. Labor comes to $310. At the supply house the technician buys a contactor and a capacitor for $186.40 on a personal card, pays $12 for parking, and drives 42 miles in their own vehicle. The company's policy pays 70 cents a mile, marks materials up 20 percent, passes parking through at cost, and does not bill mileage on this contract.

The technician adds three expenses from the job. Materials: $186.40, paid by technician, billable, receipt photo attached. Parking: $12, paid by technician, billable, receipt photo attached. Mileage: 42 miles at $0.70, which is $29.40, paid by technician, not billable, no receipt needed because the distance comes from the job.

The approval rule sends anything under $75 to the supervisor and anything above to the service manager. Parking and mileage are approved by the supervisor in one tap. The $186.40 goes to the manager, who checks the receipt against the parts on the job and approves it.

Two totals come out. The technician is owed $186.40 + $12 + $29.40 = $227.80, which goes to the next pay run. The client is billed $186.40 x 1.20 = $223.68 for materials plus $12 for parking, so $235.68 in expenses. With labor the invoice is $545.68, under the $600 limit. If the materials had cost $250, the billed total would have been $622, and the job should have stopped for client approval before the purchase, not after.

The job now shows a true cost: labor cost, plus $227.80 of expenses, against $545.68 billed. The mileage shows as a cost with no revenue, which is the number the contract review needs next year.

Before you buy

What to check before you choose a tool

Good signs

  • The technician adds the expense from inside the job, and the app works with no signal and uploads later.
  • A plain expense can be logged with no purchase order and no inventory item.
  • Who paid and billable or not are separate fields on every expense.
  • Approval limits can differ by amount, category and role, and a rejection goes back to the technician with a reason.
  • Markup is set per category or per client, and the technician never sees or chooses it.
  • The job cannot be invoiced while an expense on it is still waiting for approval.
  • Approved expenses reach accounting with the customer on the line, and reach payroll or HR as a total per person per period.

Red flags

  • Expenses live in a separate app where the technician types the job number or picks the customer by hand.
  • Every cost must be a stock part or a purchase order raised in advance.
  • Receipts can only be attached to purchases on the vendor's own payment card.
  • Expenses count toward job cost but cannot be added to the client invoice.
  • There is no approval step, or approval is one global on or off switch.
  • Mileage has to be entered as a dollar amount with no distance or rate behind it.
  • The receipt image is not kept with the record for as long as your tax authority requires.

Fieldproxy setup

Setting it up in Fieldproxy

Fieldproxy is set up around your own process, so the expense record, its statuses and its rules are yours. A typical setup looks like this.

An expense record linked to the job

Each job gets an Expenses section. Fields, e.g.: amount, date, category, paid by (company card, technician, petty cash), billable (yes or no), receipt photo, notes. The job, customer and site come from the job itself.

Receipt photo read by the Vision agent

The technician takes a photo of the receipt in the mobile app, which works offline and syncs later. The Vision agent reads the document and fills the merchant, date and total, and the technician confirms. Office staff can also drop a receipt into Command Center and ask it to add the expense to a job, with a confirm card before anything is saved.

Statuses and approval rules

Statuses, e.g.: Draft, Submitted, Approved, Rejected, Reimbursed. Approval workflows route by amount and category, e.g. supervisor up to $75, service manager above, and no receipt means it goes back. Technicians see the status of their own claims on the phone.

A block before invoicing

A rule, e.g.: a job cannot move to Ready to invoice while any expense on it is Submitted. A second rule can require at least one expense or a No expenses tick before a technician completes the job, which is the mandatory expense step buyers asked for.

Markup and the invoice

Markup is a setting per category or per client contract, e.g. materials 20 percent, parking at cost. Approved billable expenses appear as invoice lines. Prices and markup can be hidden from technicians and subcontractors.

Accounting, payroll and HR

Invoices sync to QuickBooks or Xero. Approved reimbursements can be sent to an HR or payroll system through the open API or an automation with an outbound webhook, as a total per person per period.

Watching for gaps

The Watcher agent can flag a job completed with a supply house visit noted but no receipt, or an expense waiting more than, e.g., three days for approval. The Scheduler agent can email a weekly list of unbilled approved expenses to the office.

Regional notes

Receipts, mileage rates and record keeping by country

Official rates and rules as published in November 2026. Your own policy can pay a different rate; these are the tax authority figures people compare against.

CountryMileage rateReceipts and records
United StatesIRS business standard mileage rate for 2026: 72.5 cents per mile from January 1 to June 30, and 76 cents per mile from July 1 to December 31.Under an accountable plan, IRS Publication 463 treats accounting for an expense within 60 days and returning excess advances within 120 days as reasonable. Receipts are needed for lodging and for other expenses of $75 or more.
United KingdomHMRC approved mileage rate for cars and vans: 55p per mile for the first 10,000 business miles from 6 April 2026 (45p before that date), and 25p per mile above 10,000.The rate changed during 2026, so store the rate and the miles on each claim and apply the rate for the travel date.
CanadaCRA reasonable allowance for 2026: 73 cents per km for the first 5,000 km and 67 cents after, with 4 cents more in the territories.Records and supporting documents are kept for six years from the end of the last tax year they relate to.
AustraliaATO cents per kilometre method: 91 cents per km for 2026-27, up to 5,000 work-related km per car. This is the individual deduction rate that many employers use as a reference.Businesses keep most records for 5 years.

Rates change yearly and sometimes mid-year. Store the rate on each mileage expense so old claims keep the rate they were paid at.

How switching works

How switching to Fieldproxy works

We move your data over and set the system up to the way you already work. Fieldproxy replaces the old tool; it does not run alongside it.

  1. Send us your expense policy

    Categories, who can approve what, mileage rate, and which costs each client contract lets you rebill, with markup.
  2. We build the expense step on your jobs

    The record, statuses, approval routing and the block before invoicing, shown on your own job types before you commit.
  3. Connect accounting and payroll

    QuickBooks or Xero for invoices, and your payroll or HR system for reimbursement totals.
  4. Technicians start with the next job

    One photo per receipt from the job screen. No second app and no job numbers to type.

FAQ

Questions people ask

Can a technician scan a supply house receipt and attach it to a job?
Yes. The technician photographs the receipt from the job on their phone. In Fieldproxy the Vision agent reads the photo and fills the merchant, date and total for the technician to confirm, and the expense is saved against that job.
Can technicians submit travel expenses for back-office approval?
Yes. Travel costs such as mileage, tolls, parking and lodging are categories on the same expense record. The claim goes to the approver set for that amount and category, and the technician sees whether it is approved, rejected or repaid.
Do field expenses and receipts flow into QuickBooks?
They can. In QuickBooks Online Plus and Advanced an expense line can be ticked Billable against a customer and added to that customer's next invoice. QuickBooks also has its own Receipts area that extracts details from an uploaded receipt and suggests a matching bank transaction.
How do I add markup when I rebill an expense to the client?
Set the markup by category or by client contract, and apply it when the approved expense becomes an invoice line. QuickBooks Online lists a markup rate as an optional setting for billable expenses. Check the contract first, because many facilities contracts cap markup or require costs at receipt value.
Can expenses and advances be integrated with our HR or payroll system?
Yes, if the field system can send approved totals out. The usual pattern is one figure per person per pay period, with the claim lines attached, sent through an API or a scheduled export. An advance is recorded as a negative balance that later claims draw down.
Can a technician log an expense without a purchase order?
They should be able to. Small costs such as a $20 fitting, a toll or parking do not justify a purchase order. Keep purchase orders for planned buys from suppliers, and let a plain expense with a receipt cover the rest.
Do we need a receipt for every expense?
Your policy decides, and the tax rules set the floor. In the US, IRS Publication 463 asks for documentary evidence for lodging and for any other expense of $75 or more. Many companies ask for a photo of every receipt anyway, because a phone makes it a few seconds of work.
How do subcontractor receipts and variations fit in?
Treat them the same way: the crew adds the receipt or the variation to the job, the office approves it, and the approved amount lands in job cost against the budget. The difference is the payout, which goes on the subcontractor's claim or bill, not through payroll.

Sources

Competitor details on this page come from the vendors' own pages and documentation, checked as of November 2026. Plans and prices change, so check the vendor's current page before you decide.

See it built on your workflow

Tell us how your jobs run today. We build a demo on your stages, forms and pricing before the call.