FieldproxyAI-native field service software

Inventory and parts

How do I track van stock and parts used on jobs?

Treat every van as its own stock location with a count per part, and make the technician take each part off the van on the job that used it, so the van count drops and the job is costed in the same step. Set a minimum and a maximum per part per van, and let a purchase order or a transfer from the warehouse fire when the count falls below the minimum. Then count each van now and then and record the correction against the person who made it, so the numbers stay honest.

  • A van is a stock location, the same kind of record as a warehouse, not a note on the technician.
  • The count only stays right if parts leave the van on the job that used them. Make that step part of closing the job.
  • Set a minimum (reorder point) and a maximum per part per van. Busy vans carry more than quiet ones.
  • Parts bought at the counter never touch the van. Capture the receipt on the job so they still reach the invoice.
  • Count vans on a schedule and log who corrected what. A count with no history of corrections cannot be trusted.

Book your demo

60 minute video call ยท Step 1 of 2: your details, then pick a time

Number of employees

This page is about stock on vans and parts on jobs. It is not a warehouse management system with bins, lots and manufacturing. If you only need a price list, a plain parts catalogue is enough.

Facts checked as of November 2026. Sources at the end of the page.

Step by step

How to track van stock, step by step

The pattern is the same in every system that does this well. Microsoft Dynamics 365 Field Service and ServiceTitan both treat each truck as a location with its own quantities and move stock with transfers, purchase orders and adjustments.

1. Make each van a stock location

Dynamics 365 Field Service defines a warehouse as any company location that holds inventory, and its own list includes technician trucks next to warehouses and loading docks. Each location then carries Quantity Available, Quantity Allocated, Quantity on Hand and Quantity on Order per product.

2. Decide which parts you track, and load starting counts

Do not track every screw. In Dynamics only products whose Field Service Product Type is Inventory are tracked, and adding a product to a location does not set a quantity: you record the opening count with an inventory adjustment, one adjustment per location.

3. Link each technician to a default van

When a technician adds a part to a job, the system needs to know which van it came from. Dynamics lets you associate a warehouse with each bookable resource so work order product usage deducts from the right place. The warehouse on a work order product is typically the technician's truck.

4. Take the part off the van on the job

The deduction should happen when the part is recorded as used, not at the end of the week. In Dynamics, a work order product added as Estimated and Allocated only reserves stock. When its Line Status is set to Used, the system deducts the quantity at the related warehouse.

5. Give every part a minimum and a maximum per van

ServiceTitan keeps these in an inventory template, a stock list with a minimum and a maximum for each item, which can be assigned to several trucks. Min is the reorder point. If the available quantity plus the quantity on order falls below Min, a replenishment record is generated to bring the location up to Max.

6. Refill from the warehouse first, the supplier second

In ServiceTitan you create a transfer when the warehouse has the part and a purchase order when it does not. Purchase orders from the Replenishment page can be grouped by vendor and warehouse, vendor and location, or vendor and location and job, so one supplier gets one order instead of ten.

7. Move stock between vans as a recorded transfer

When two technicians meet at a site and one hands over a part, record it. Dynamics creates two inventory journals for a transfer, one that lowers Quantity on Hand at the source and one that raises it at the destination, and it blocks a transfer larger than the quantity on hand at the source. Inventory transfers are not on its mobile app by default, so an administrator has to add the table.

8. Count, adjust and keep the history

Counts drift. Adjustments are for shrinkage, defects, loss or theft found after a physical count. Dynamics does not enforce non-negative inventory, so a van can show minus two of a part if someone used it before it was received. Watch for negatives, because they are the first sign the process is being skipped.

Why it goes wrong

Why van stock ends up wrong or untracked

These are the situations owners described on our sales calls, told by trade and size.

No warehouse at all

A commercial facility maintenance company with its own technicians and a vendor network said every technician carries stock on a truck and there is no central warehouse. Most inventory modules assume a warehouse sits above the vans, so they asked if truck stock alone could be tracked and applied to a work order for client billing.

Nothing on paper to start from

A locksmith and security hardware business with a shop and mobile technicians said everything had been on paper for 40 years and there was no solid parts list. They planned to launch inventory only once they were comfortable with it. The lesson: start with the 30 parts that run out, not the whole catalogue.

The reorder depends on someone remembering

A satellite equipment installer described the case where a technician has one left on the truck. They wanted a request to the logistics department generated automatically at that point, and they also wanted received stock scanned in, because today it is scanned into a spreadsheet and uploaded by hand.

A catalogue too big to carry

A multi-trade home service business with appliance repair, electrical, air conditioning and solar work has a parts catalogue of about a million items. It cannot sync that to every phone. They needed stock for the vans and a warehouse, with the rest looked up on demand.

Receipts texted to the office

An electrical and low-voltage contractor working in self-storage facilities gives technicians credit cards for parts. A fencing contractor said crews text receipts to staff, so nobody knows what the job really cost. A commercial facility firm said its old system forced every expense to be an inventory part, so a technician could not just log that they spent $20.

Parts must arrive before the visit

A service company for office printers and note counting machines said the technician should reach the client only after the spare part has reached. An EV charger maintenance operator wanted parts and van stock requested, approved and reported, including how many fans one technician used.

Ways to do it

Ways to track van stock

Five common approaches. Check each vendor's current documentation, since plans and menus change.

ApproachWhat it does wellWhere it falls short
Spreadsheet per van, refreshed by the technicianFree, and a technician can fill it in on a phone. Fine for a few vans and a short parts list.Nothing links a part to a job, so the invoice and the count disagree. Nothing triggers a reorder.
Accounting software stock tracking, such as QuickBooks OnlineIntuit says inventory features are available for QuickBooks Online Plus and Advanced, and you can set a reorder point per product so it alerts you when stock runs low.It tracks stock as a financial record. The help page does not describe a location per van or a link to a job, so check that before you rely on it for trucks.
A home service app plus an inventory add-on, such as Housecall Pro with PlyHousecall Pro's own help article on keeping track of inventory points to a Material Usage on Jobs report and to QuickBooks Online Plus. For stock levels it lists a Ply integration, where materials from the price book sync both ways and a primary warehouse is chosen at setup.Two products and two logins. The Housecall Pro article we read does not mention vans, warehouses or stock locations, so van stock lives in the add-on.
Inventory inside an FSM, such as ServiceTitanInventory templates with Min and Max per truck, a Replenishment page that raises transfers or purchase orders, and vendors set up as Replenishment Vendors.The docs say account configuration is needed, and replenishment is triggered only after a job starts. Pages were marked stale when read, so confirm menus in your account.
Warehouses and work order products in Dynamics 365 Field ServiceTrucks as warehouses, adjustments, transfers, purchase orders with approval, returns, and an inventory journal that works as a ledger.Microsoft's own table points to an ERP for complex pricing, multiple currencies or advanced procurement, and notes quantities can go negative unless you watch them.
FieldproxyEach van is its own stock location with a minimum and target per part. Parts are scanned off the van onto the job, and stock moves by approved transfer.Built for field teams that want stock and the work order in one place. If you need bin-level warehouse picking or manufacturing, pair it with a system built for that.

Worked example

A worked example: one van, one part

Say a plumbing and HVAC company runs 12 vans, and each van carries about 25 tracked parts. That is 300 van and part combinations to keep right, which is why the rules have to run on their own.

Take one of them: a 40 amp contactor on Van 7. You set Min 2 and Max 6. The van starts the morning with 3. A technician replaces a failed contactor on job one and scans it off the van. Count: 2, which is not below Min, so nothing happens. On job four he uses a second one. Count: 1, which is below Min of 2, so a replenishment appears for 5 (6 minus 1).

If the warehouse has 5, the office books a transfer and the part is on the van by morning. If it has 1, the office orders 4 from the supplier, and the order names Van 7 so the part can be collected for that truck. The same count is what tomorrow's schedule is checked against: if a job on Van 7 tomorrow needs two contactors and the van holds one, someone sees it today and not at 10 am from a customer's driveway.

Now add the counter purchase. The technician buys a flue adapter at a supply house for $38. It never touched the van. A photo of the receipt on the job gives the office a cost line to check, mark up and invoice. Without that photo it is an expense nobody can match to a job.

Before you buy

What to check before you choose a tool

Good signs

  • A van is a real location with its own quantity per part, not a free-text field.
  • Using a part on a job lowers the van count in the same step, and the part lands on the job cost.
  • Min and max are set per van, not only per company.
  • Transfers between vans and warehouses are recorded with both counts changing.
  • Corrections to a count are logged with who made them and when.
  • A receipt photo can become a job cost line without retyping.
  • It works offline, since vans park in basements and rural sites.

Red flags

  • Inventory is a separate add-on with its own login and its own price book to keep in sync.
  • Stock only exists at company level, so a van cannot be counted on its own.
  • Parts can be added to a job without choosing where they came from.
  • Reorders are a report someone has to remember to read.
  • Every expense has to be an inventory part, with no way to log a plain $20 purchase.
  • Negative quantities are allowed and nobody is alerted.

Fieldproxy

Setting it up in Fieldproxy

This is the setup we would build for you. It uses the inventory features described on /solutions/spare-parts. Numbers marked e.g. are examples to replace with yours.

1. One location per van, plus a warehouse if you have one

Each van is its own stock location, counted and restocked on its own. If you have no central warehouse, start with the vans alone and add a warehouse record later. Link each technician to their van.

2. Load the parts that matter

Import the 30 to 100 parts that run out, with their cost and your markup. The rest of a very large catalogue can stay out of the van counts. Set a minimum and a target per part per van, e.g. Min 2 and target 6 for a contactor on a busy van and Min 1 and target 3 on a quiet one.

3. Add materials to the job from the phone

In the technician app the Add material dialog shows stock on hand in the warehouse and on each technician's truck. The part is scanned off the van with the phone camera and the van's count drops by one. The part lands on the work order with your markup. See /solutions/work-order-jobs.

4. Block closing a job without its parts

Add a rule to the job form, e.g. a job of type Repair cannot be marked complete until at least one material line or a No parts used box is set. This is the cheapest way to keep counts honest.

5. Let the minimum do the reordering

When a van's stock crosses its minimum, a purchase order for the shortfall is drafted to that part's supplier. It goes out by email or through the supplier's API where one exists, and it can name the van. Route it for approval by value if you want. The Watcher agent (/agents/watcher-agent) checks tomorrow's jobs against what each assigned van carries and flags a part that is missing.

6. Move stock by approved transfer

Warehouse to van and van to van moves are approved, then sent, and both counts change when the part is received.

7. Count from the phone

A technician counts a van or a shelf and corrects the levels in the app. Every correction is recorded against who made it, so a manager can review the pattern.

8. Receipts and warranty

A photo of a counter receipt on the job becomes a cost line at your markup, and the office checks it before the invoice goes out. Each part is marked warranty or billable, and warranty parts go to their own claim queue. The Vision agent (/agents/vision-agent) can read a photo such as a nameplate into the record. Prices stay in one place: one price per company with unlimited users, see /pricing.

How switching works

How switching to Fieldproxy works

We move your data over and set the system up to the way you already work. Fieldproxy replaces the old tool; it does not run alongside it.

  1. Bring your parts list and one van's real stock

    A spreadsheet, a price book export or even a photo of the shelf is enough. Tell us which 30 to 100 parts run out and which vans carry them.
  2. We set up vans, levels and the job screen

    Each van becomes a location with a minimum and a target per part, and the job's material screen is built around how your technicians add parts. You see it on your own parts before you commit.
  3. We load the stock and your suppliers

    Opening counts, supplier details and the markup rules come across so the first purchase order is real.
  4. Count, then go live van by van

    Start with one or two vans, run a count after two weeks, and add the rest once the numbers match the shelf.

FAQ

Questions people ask

Can I track truck stock without a central warehouse?
Yes, if the tool treats a van as its own location. Dynamics 365 Field Service, for example, defines a warehouse as any location that holds inventory, including technician trucks. Check that restocking can be a purchase order straight to the van, not only a transfer from a warehouse that does not exist.
How do min and max levels work for a van?
Min is the reorder point and Max is the most the van should carry. In ServiceTitan, when the available quantity plus the quantity on order falls below Min, a replenishment record is generated to bring the van up to Max.
What happens when a technician buys a part at the counter?
It never touches the van count, so it needs its own path: a photo of the receipt on the job, read into a cost line and checked by the office before it is billed with markup. Do not force it through inventory as a fake part.
Can van stock be applied to a work order for client billing?
Yes. The part is added to the work order from the van, the van count drops, and the line is priced with your markup. The client invoice then matches what the technician used.
Why does my van count go negative?
Because parts were used before the receipt was recorded, or the job closed without the part being scanned. Dynamics does not enforce non-negative quantities by default, so you have to watch for negatives and fix the process, not just the number.
How often should I count van stock?
There is no standard. A workable start, e.g., is a full count of every van each quarter and a quick count of the 10 fastest-moving parts each month, plus a count after any week with many transfers. Record who corrected what, so you can see a pattern.
Does Housecall Pro track van stock?
The help article we read describes a Material Usage on Jobs report and QuickBooks Online Plus for tracking, and it does not mention vans or stock locations. Housecall Pro's help centre also lists a Ply inventory integration that syncs the price book two ways and reorders through Ply.
Does it connect to my accounting software?
Fieldproxy syncs with QuickBooks and Xero for invoices. If another system owns your stock, we can connect through the open API. See /integrations for what is live.

Sources

Competitor details on this page come from the vendors' own pages and documentation, checked as of November 2026. Plans and prices change, so check the vendor's current page before you decide.

See it built on your workflow

Tell us how your jobs run today. We build a demo on your stages, forms and pricing before the call.