Markup and margin calculator
Markup and margin are not the same number, and mixing them up is the most common way a contractor underprices parts. Enter a cost and either a markup or a target margin to get the price.
Result
- Price at a 50.0% markup
- $120.00
- That markup as a margin
- 33.3%
- Price for a 50.0% margin
- $160.00
- That margin as a markup
- 100.0%
How it is calculated
- Price from markup = cost × (1 + markup %)
- Price from margin = cost ÷ (1 − margin %)
- Margin % = markup ÷ (1 + markup); markup % = margin ÷ (1 − margin)
Worked example
A part that costs $80: a 50% markup gives a $120 price and a 33.3% margin. To earn a 50% margin you need a $160 price, which is a 100% markup.
Before you rely on it
- Margin can never reach 100%; markup has no upper limit.
- Price books usually use a sliding scale: higher markup on low-cost parts, lower on expensive equipment.
Running a service business?
In Fieldproxy, markup and margin sums like this one sit inside your own quotes and job forms.
Questions
What markup gives a 50% margin?
A 100% markup. To earn a 40% margin you need a 66.7% markup, and a 30% margin needs a 42.9% markup.
Should contractors price on markup or margin?
Set targets in margin, because that is what your profit and loss statement shows, then convert to the markup your price book applies to cost.
More calculators
See it built around how your team already works.
Get Demo