All calculators

HVAC CFM calculator

CFM, cubic feet per minute, is how much air a system moves. Use this to size airflow for a room from its volume and the air changes per hour it needs, or to check the airflow a system should deliver for its tonnage.

Result

Room volume
2,700 cu ft
Airflow the room needs
270 CFM
Airflow per square foot
0.90 CFM per sq ft
Airflow from a 3.0 ton system
1,200 CFM

How it is calculated

  • By room: CFM = (length × width × height × air changes per hour) ÷ 60
  • By tonnage: CFM = tons × CFM per ton (400 is the usual design figure for cooling)

Worked example

A 20 × 15 ft room with a 9 ft ceiling is 2,700 cubic feet. At 6 air changes an hour it needs 2,700 × 6 ÷ 60 = 270 CFM.

Before you rely on it

  • Air changes per hour depend on the space: a bedroom needs far fewer than a commercial kitchen. Use the figure from the code or standard that applies to the job.
  • 400 CFM per ton is a design starting point. Humid climates often run lower (about 350) and dry climates higher (about 450).

Running an HVAC business?

In Fieldproxy, hvac cfm sums like this one sit inside your own quotes and job forms.

Questions

How many CFM do I need per square foot?

A common starting point for homes with 8 ft ceilings is about 1 CFM per square foot, which works out to roughly 7.5 air changes an hour. The room calculation above is more accurate because it uses the real ceiling height and the air change rate the space needs.

How many CFM per ton of cooling?

400 CFM per ton is the standard design figure. A 3 ton system should move about 1,200 CFM.

More calculators

See it built around how your team already works.

Get Demo