Pipe volume calculator
How much liquid a length of pipe holds. Plumbers use it to work out fill and drain volumes, glycol and chemical dosing for closed loops, and how long a hot tap takes to run hot.
Result
- Volume
- 4.08 US gallons
- In litres
- 15.4 L
- In cubic feet
- 0.545 cu ft
- Weight of water
- 34.0 lb
- Per foot of pipe
- 0.0408 gallons
How it is calculated
- Volume (cubic inches) = π × (inside diameter ÷ 2)² × length in inches
- US gallons = cubic inches ÷ 231
- Litres = US gallons × 3.785; weight of water = gallons × 8.34 lb
Worked example
100 ft of pipe with a 1 in inside diameter: π × 0.5² × 1,200 = 942.5 cubic inches, which is 4.08 US gallons, 15.4 litres and about 34 lb of water.
Before you rely on it
- Use the inside diameter, not the nominal size. A nominal 1 in Schedule 40 pipe has an inside diameter of 1.049 in; copper and PEX of the same nominal size differ.
- For a system total, add each pipe run and the volume of tanks, coils and heat exchangers.
Running a plumbing business?
In Fieldproxy, pipe volume sums like this one sit inside your own quotes and job forms.
Questions
How many gallons are in 100 feet of 1 inch pipe?
About 4.08 US gallons for a true 1 in inside diameter. Nominal 1 in Schedule 40 steel, with a 1.049 in inside diameter, holds about 4.49 gallons per 100 ft.
How do I calculate pipe volume?
Multiply π by the square of half the inside diameter, then by the length, keeping the units the same. Divide cubic inches by 231 for US gallons.
More calculators
See it built around how your team already works.
Get Demo