All calculators

HVAC load calculator

A quick estimate of the cooling a space needs, for a first conversation with a customer or a sanity check on an existing system. It uses the square-foot method with adjustments for climate, insulation, ceiling height and people.

Result

Estimated cooling load
45,000 BTU per hour
In tons
3.75 tons
Equipment size to check
4.0 tons
Airflow at 400 CFM per ton
1,500 CFM

How it is calculated

  • Base load = floor area × BTU per sq ft for the climate (20 cool, 25 moderate, 30 hot)
  • Adjust for insulation (−10% good, +15% poor) and ceilings above 8 ft (in proportion)
  • Add 600 BTU per person beyond the first two, and 1,200 BTU for a kitchen
  • Tons = BTU per hour ÷ 12,000

Worked example

1,800 sq ft in a moderate climate with average insulation and 8 ft ceilings: 1,800 × 25 = 45,000 BTU per hour, about 3.75 tons, so a 4 ton system is the size to check.

Before you rely on it

  • This is a rule-of-thumb estimate. Equipment should be sized from a room-by-room Manual J (or the equivalent in your country), which accounts for windows, orientation, air leakage and duct losses.
  • Oversizing is as much a problem as undersizing: an oversized system short-cycles and does not remove humidity.

Running an HVAC business?

In Fieldproxy, hvac load sums like this one sit inside your own quotes and job forms.

Questions

How many BTU do I need per square foot?

As a rough guide, 20 BTU per square foot in a cool climate, 25 in a moderate one and 30 in a hot one, before adjusting for insulation, ceiling height and occupancy.

How many square feet does a 3 ton unit cool?

A 3 ton unit delivers 36,000 BTU per hour. At 25 BTU per square foot that is about 1,440 sq ft; in a hot climate at 30 BTU per square foot it is about 1,200 sq ft.

More calculators

See it built around how your team already works.

Get Demo