FieldproxyAI-native field service software

Scheduling and travel

How do I schedule technicians who start from home and stay overnight on multi-day trips?

Give every technician their own start and end point (home, depot or tonight's hotel) and count the drive from that point to the first job and from the last job back as part of the day. When the return drive would break your daily limit, or when a hotel night costs less than driving home and back, group the jobs into a trip record that holds the nights away, so day two starts from the hotel and not from home. Then decide in writing which travel hours are paid and how much driving one day may hold, because those two rules change the plan more than any routing engine does.

  • Start and end location is a per-person, per-day setting. On night two of a trip it is the hotel, not the home address.
  • A day is job time plus drive time, including the first and last leg. Set one limit for the whole day and one for driving alone.
  • Make the trip a record: technician or crew, jobs, nights, where they sleep, estimated travel cost, approval.
  • A hotel night pays for itself when it saves more driving than it costs. Work out your own break-even in hours.
  • Paid travel time depends on the country and on whether the technician has a fixed workplace. Write the rule down before you automate it.

Book your demo

A video call with our team

Number of employees

Most scheduling tools plan one day at a time from one fixed start point. Trips with hotel nights usually need a planner to decide the nights, with software doing the drive time math. The pay and driving rules below summarize official pages and are not legal advice.

Facts checked as of November 2026. Sources at the end of the page.

Step by step

How home-start and overnight scheduling works, step by step

The process is the same for a two-person cleaning crew, a traveling inspector or a consultant who flies. Only the limits change.

1. Store a start and end location for each technician

Fields on the technician record: home address with coordinates, depot or branch address, and which of the two the day starts and ends at. Enterprise tools model this directly. Microsoft Dynamics 365 Field Service has Start Location and End Location on each resource with three choices: Location agnostic, Resource Address and Organizational Unit Address. With Location agnostic, travel to the first booking and from the last booking is not calculated at all.

2. Validate the addresses

A home address that does not geocode silently falls back to something else. ServiceTitan's Schedule Assistant uses the address of the technician's main business unit when the technician has no validated address, and the address of their first job if the business unit has none either. A plan built on a fallback looks fine and is wrong by the length of someone's commute.

3. Count the first and last leg in the day

Day length = drive from start point to job 1 + job durations + drive between jobs + drive from the last job to the end point + breaks. Set two limits, e.g. 10 hours for the whole day and 4.5 hours of driving. Use real durations from the last visit to the same site where you have them, not the quoted time.

4. Decide when a job becomes an overnight job

Write the rule as numbers: e.g. more than 2.5 hours one way from home, or a day that would run past 10 hours with the drive back. Anything past the line is not scheduled as a day visit. It waits in a pool for the next trip to that region, with its due-by date visible.

5. Build the trip as its own record

Fields: technician or crew, region, start and end date, the jobs in order, nights away, where they sleep each night (town is enough until the hotel is booked), vehicle or flight, estimated travel cost, and a status such as Draft, Approved, Booked, Under way, Closed. Jobs point to the trip. The start location for day two and later is the overnight location.

6. Match skills before distance

A trip is only efficient if the person on it can do every job on it. Filter the pool by the skills and certificates each job needs, then pick the technician whose home is closest to the first and last job of the trip, not to the middle.

7. Confirm dates with customers before you book rooms

One customer moving a date can strand a trip. Send the planned date, ask for a yes, and book non-refundable travel only when the jobs on that trip are confirmed. Keep one flexible job per trip, e.g. a planned maintenance visit with a wide window, to fill a gap if something moves.

8. Capture actual travel and expenses against the trip

The technician app records start of travel, arrival, departure and end of day with GPS. Hotel, meals, fuel, parking and tolls are submitted with a receipt photo against the trip, approved by the office, and split across the trip's jobs if the customer pays travel.

Failure modes

Why it goes wrong

The planner does it in their head, all day

A commercial kitchen cleaning firm sending crews across the country from one city told us route planning takes its logistics manager most of the day, and that one customer reschedule means looking at the whole week again.

Every day is planned from the office

The tool assumes everyone starts at the depot, or assumes no start point at all. The schedule shows a tidy 8-hour day and hides a 90-minute drive at each end. Technicians either work 11 hours or arrive late to the first job.

Day two starts from home on the map

The technician is in a hotel 200 miles away, but the system still measures tomorrow's drive from their house. Travel estimates, arrival windows and nearest-technician suggestions for urgent jobs are all wrong for the length of the trip.

Skills are checked after the route is built

A training and audit company with more than 50 consultants wanted geographic runs matched to what each consultant is qualified to deliver. A run planned on distance alone falls apart when one stop needs a different person.

Travel cost is found out afterward

A managed IT services provider using part-time technicians in several countries needed travel cost entered by the technician and accepted or rejected by the back office before the visit, with parking, meals and overtime tied to the job. Without that step the cost appears on an expense claim a month later.

Reports pile up for the hotel room

An inspection firm described technicians finishing a long day on site and then writing ten reports at a hotel desk. If the form is not completed on site, every night away adds unpaid or overtime admin.

Options

Ways to do it

Seven real approaches. The difference is whether the tool knows where each person starts, and whether it can plan more than one day as a single trip.

ApproachWhat it does wellWhere it falls short
Spreadsheet, a maps app and a plannerFree and flexible. A good planner knows which hotels the crews like and which customers move dates.Drive times are checked one pair at a time, nothing recalculates when a job moves, and the plan lives in one person's head.
Jobber daily route optimization (legacy schedule)On the map you pick a visit and choose Route From Here, and Jobber builds the most efficient route from that address. Simple for local day routes.Visits must be assigned and set as anytime to be optimized, and the help article describes day-to-day routes. It does not describe a multi-day mode or a home address per team member.
ServiceTitan Dispatch Pro and Optimize Technician RouteEach technician gets a starting and ending location: home address, business unit address or a custom address. Settings include Max Drive Time and how important it is to end the day near the ending location.Start and end locations cannot be changed in bulk. Optimize Technician Route works on one technician for one day, up to 70 jobs. The pages we read do not describe a hotel or overnight start point.
Microsoft Dynamics 365 Field Service with Resource Scheduling OptimizationStart and End Location per resource. A resource can be set to Allow Travel Before Work Hours, Allow Travel After Work Hours or both, with a Travel Limit in minutes. Multi-day requirements keep the same resource across days.One travel limit covers both before and after hours. Multi-day here means one long job at one site, e.g. a 40-hour work order, not a tour of different sites with hotel stops. Needs an administrator to configure.
ServiceNow Field Service multi-day task schedulingFor tasks longer than one workday, it locks the agent's schedule for the duration so nothing else is assigned, and respects work hours and breaks.A separate application to install (plugin com.snc.fsm_multiday_tasks). Like Dynamics, it handles one long task, not a string of short jobs with nights between them.
A route planner with multi-day routes (OptimoRoute, Route4Me)OptimoRoute's multi-day long haul planning makes each day's route end where the next begins instead of returning to the depot, with an End route option for the day the driver goes home. Route4Me plans routes across days using time windows with a Day value and inserts overnight driver breaks.OptimoRoute's version is a beta, available on request on Custom plans, applies one set of working hours to all drivers and leaves breaks and overtime out of the plan. Both are route tools: job forms, skills, expenses and invoicing live elsewhere.
A configurable platform (Fieldproxy)Home base per technician, a trip record with nights and travel cost, your own day and driving limits, and jobs, forms, expenses and invoices in the same system.The trip rules are set up for your business, not switched on from a menu, and a person still approves each trip.

Vendor facts are from each vendor's own help pages, read in November 2026. Features change, so check the linked page.

Worked example

A worked example: five jobs 190 miles from home

Say one technician lives 190 miles from a cluster of five jobs. The drive is 3 hours 10 minutes each way. The jobs take 3, 2.5, 3.5, 2.5 and 3.5 hours, 15 hours on site in total, and are about 30 minutes apart. Your limit is a 10-hour day.

As day visits, the round trip alone is 6 hours 20 minutes, which leaves room for one job a day. That is five days, 1,900 miles and 31 hours 40 minutes of driving. As one trip with two hotel nights, it looks like this:

DayStarts fromPlanDrivingDay length
1HomeDrive out, job 1 (3 h), job 2 (2.5 h), hotel3 h 40 min9 h 10 min
2HotelJob 3 (3.5 h), job 4 (2.5 h), back to hotel1 h 30 min7 h 30 min
3HotelJob 5 (3.5 h), drive home3 h 40 min7 h 10 min
Trip5 jobs, 2 nights8 h 50 min3 days

A worked example, not a benchmark. Local driving on the trip is taken as 100 miles, so 480 miles in total.

The trip saves two working days, 22 hours 50 minutes of driving and 1,420 miles. At a loaded labor cost of $45 an hour that is about $1,028, and at the IRS business mileage rate of 76 cents a mile for July to December 2026 the miles are about $1,079.

The trip adds two hotel nights at, say, $130 and three days of meals at $60: $440. The net saving is about $1,670, and the technician is free for two more days of work.

The useful number to keep is the break-even. Here an hour of driving costs about $90 (an hour of labor plus 60 miles at 76 cents), and a night away costs $190. So a night pays for itself once it saves a little over two hours of driving. Work out the same figure with your own rates and write it into the overnight rule in step 4.

Before you buy

What to check before you choose a tool

Good signs

  • Each technician has their own start and end location, and it can differ by day.
  • The start point for tomorrow can be set to a hotel or the last job without editing the home address.
  • The first and last leg of the day show on the schedule as travel blocks with a duration.
  • You set a limit for the whole day and a separate limit for driving, and the planner warns when either is passed.
  • Jobs can be grouped into a trip that carries nights, estimated cost and an approval.
  • Skills and certificates filter who can take a trip before distance is compared.
  • Travel hours are recorded separately from on-site hours, so payroll can apply your paid-travel rule.
  • Hotel, meal and mileage expenses attach to the trip and can be split across its jobs.

Red flags

  • Drive time is only calculated between jobs, never from where the day starts.
  • A missing or unvalidated home address falls back to the office with no warning.
  • Optimization runs for one technician and one day only, and you plan trips of three or more days.
  • Multi-day means one long job at one site, and your trips are many short jobs in a row.
  • The route tool and the job system are separate, so a moved job has to be changed in both.
  • Technicians' home addresses are visible to everyone with dispatch access.

In Fieldproxy

Setting it up in Fieldproxy

Fieldproxy is configured around your process, so the trip rules below are fields, statuses and checks set up for your account. Values marked e.g. are examples to replace with your own.

Home base on the technician record

Fields for home address, depot, default start and end point, e.g. a maximum one-way drive for a day visit of 2.5 hours, and e.g. a daily driving limit. Home addresses can be limited to the roles that plan work.

A Trip record that jobs point to

Technician or crew, region, dates, the jobs in order, overnight location per night, estimated travel cost, and statuses such as Draft, Approved, Booked, Under way and Closed. A job past the overnight line cannot be scheduled as a day visit until it is on a trip, e.g. via a check on the Scheduled status.

Dispatch agent proposes who goes

The Dispatch agent assigns the right technician by distance, skills and certifications, inventory and cost. For a trip, distance is measured from the technician's start point for that day, which is the overnight location once the trip is under way.

Command Center drafts the trip

Ask in plain English, for example: list the jobs due in the next three weeks more than 2.5 hours from any technician's home, grouped by region, with total on-site hours. The planner turns a group into a trip and approves it. A person makes the call on nights away.

Watcher agent flags trips at risk

For example: a job on a booked trip whose customer has not confirmed 5 days before departure, a planned day over your hour limit after a job was added, or a due-by date that will pass before the next trip to that region.

Travel, expenses and reports from the phone

The Android and iOS app records travel start, arrival and departure with GPS, takes receipt photos for hotel, meals and fuel against the trip, and completes the job form on site, including offline, so the report is done before the technician reaches the hotel.

By country

Pay and driving rules that change the plan

United States: which travel hours are work time

Under federal rules, ordinary travel from home to work is not work time, whether the employee works at a fixed location or at different job sites. Travel from job site to job site during the workday is. Travel that keeps an employee away from home overnight is work time when it cuts across the employee's workday, including the same hours on days they do not normally work. As an enforcement policy, time spent outside regular hours as a passenger on a plane, train, bus or car is not counted. State rules can be stricter.

United States: driving limits for heavier vehicles

Federal hours of service rules cover commercial motor vehicles, which include vehicles with a gross weight or weight rating of 10,001 pounds or more used in interstate commerce. A property-carrying driver may drive 11 hours within a 14-hour period after 10 consecutive hours off duty. A light service van is usually under the weight line, but a loaded truck with a trailer may not be, so check your vehicle ratings.

United Kingdom: travel from home can be working time

GOV.UK lists travel between home and work at the start and end of the working day as part of the working week if you do not have a fixed place of work. It also lists travelling outside normal working hours as not counting. This follows a 2015 ruling by the Court of Justice of the European Union about security system technicians whose regional offices had been closed: their journeys between home and the first and last customer of the day were working time.

United Kingdom: van driving hours

Under the GB domestic rules for goods vehicles you must not drive for more than 10 hours in a day or be on duty for more than 11 hours on a day when you drive. Vehicles under 3,500 kg used for inspection, cleaning or maintenance work are exempt from the daily duty limit, not from the driving limit.

Hotel and meal allowances

If you pay a flat allowance per night instead of receipts, pick a published reference. The US General Services Administration sets per diem rates for lodging and for meals and incidental expenses: a standard rate for most of the continental United States and individual rates for about 300 higher-cost areas. Store the rate on the trip so the estimate and the claim use the same number.

How switching works

How switching to Fieldproxy works

We move your data over and set the system up to the way you already work. Fieldproxy replaces the old tool; it does not run alongside it.

  1. Bring last month's trips

    Two or three real trips with the jobs, who went, where they stayed and what it cost, plus your rules for paid travel time and the longest day you allow.
  2. We build home bases, limits and the trip record

    Technician start and end points, your day and driving limits, the overnight rule, trip statuses and the approval step, set up before you commit.
  3. Open jobs and due dates come across

    Sites, open jobs, recurring visits with due-by dates and each technician's skills are loaded from your spreadsheets and exports, so the first trips are planned on real work.
  4. Plan one region as a trip, then the rest

    The first trip runs with the technician app recording travel and expenses. You compare planned and actual hours, adjust the limits, then switch the other regions over.

FAQ

Questions people ask

Can scheduling account for travel time from each technician's home base and overnight hotel stays?
Yes, if each technician has their own start and end location and it can change by day. ServiceTitan and Dynamics 365 Field Service both store a per-technician start and end location. The hotel night is the harder part: in most tools you change the start point by hand, or you hold the nights on a trip record as described above.
Can the scheduler use the last job's real duration, including drive time, to pair jobs into an 8-hour day?
It can when the job record keeps actual time on site from the previous visit and the day limit counts drive time. Until technicians record time in the app, there is no last duration to use, so the first cycle runs on estimates.
Does the scheduler flag a conflict when the drive between two jobs is too short?
It should show travel as its own block between jobs and warn when the next start time is earlier than arrival. Check this on a demo with two of your sites that are far apart, and check the first leg from home as well.
Can software estimate flights and travel costs when scheduling?
Drive time and mileage can be calculated. We did not find a field service tool whose help pages document live flight prices in the scheduler. The practical approach is an estimated travel cost field on the trip, filled from your usual fares and allowance rates, with actual costs added from receipts.
Can AI plan geographic runs matched to each technician's skills and drive time?
It can draft them: group jobs by region, filter by the skills each job needs, and total the hours against your limits. In Fieldproxy the Dispatch agent weighs distance, skills and certifications, inventory and cost. A person should still approve nights away and customer dates.
Is the drive from home to the first job paid time?
It depends on the country and the contract. Under US federal rules ordinary home to work travel is not work time, even to different job sites. In the UK, travel between home and the first and last job counts toward the working week for workers with no fixed place of work. Ask an employment adviser before setting the rule.
Can a technician enter a travel cost and have the office approve it before the visit?
Yes. Make travel cost a request on the job or trip with Accept and Reject for the back office, and hold the job in a waiting status until it is decided. Part-time and contract technicians can accept or decline the job the same way.
When is a hotel night cheaper than driving home?
When the driving it saves costs more than the night. Add your loaded labor cost per hour to your mileage cost per hour of driving, and divide the cost of a night (room plus meals) by that. In the worked example above the answer is a little over two hours of driving saved.

Sources

Competitor details on this page come from the vendors' own pages and documentation, checked as of November 2026. Plans and prices change, so check the vendor's current page before you decide.

See it built on your workflow

Tell us how your jobs run today. We build a demo on your stages, forms and pricing before the call.