FieldproxySwitching guide ยท sources checked 19 November 2026

How to leave Dispatch Anywhere, TOPS or Omadi without losing a single car on the lot

Short answer: read your Autura agreement and ask for your data in writing first. Autura says its products carry no long-term contract, but confirm your own notice terms. We found no public guide to a self-serve export, so ask Autura support for a CSV of every vehicle on the lot with its notice dates, open and unbilled tows, accounts, trucks, drivers and call history with photos. Then rebuild your tow types, fee schedules and notice clocks, move one stream of work at a time (private property first, motor clubs last), and keep the old system read-only until the last stored vehicle has been released or sold.

With Fieldproxy, migration is free and assisted and you're live within a day: your first team runs real tows in Fieldproxy the day after the setup call, with its own statuses, photo rules and authorization form. Everyone else moves on a schedule you set. One price per company with unlimited users, so a new driver or a night dispatcher never changes the bill.

Leaving Dispatch Anywhere, TOPS or Omadi? See your setup first

Send us a Dispatch Anywhere, TOPS or Omadi export. We build your stages, forms and data in Fieldproxy, free, before you decide.

Book your demo

A video call with our team

Number of employees

Why teams leave

Why teams leave Dispatch Anywhere, TOPS or Omadi, with the facts checked

Dispatch Anywhere, TOPS, Omadi and Tracker were built by people who know towing, and Dispatch Anywhere in particular has run some shops for close to two decades. Operators rarely leave because the dispatch screen fails. They leave because the company behind it has changed shape several times, and because the work around dispatch (private property rules, the lot, the phones) needs more than a dispatch product. Each point below is checked against the sources listed on 19 November 2026.

Your vendor has changed hands twice

Beacon Software, TOPS Dispatch, Tracker Management and Omadi were combined into Traxero in April 2022. Traxero then merged with Autura in October 2024, a deal that claimed 3,000+ customers and 50,000+ daily tows. Autura named Michael Winton CEO in January 2025, and its September 2026 release names Rudy Nieto as CEO. Mergers are not a flaw, but they are a fair reason to ask where your product is going. Fieldproxy is the company you buy from, and the setup we build is yours: your statuses, your forms, your rules.

source: Newswire (Apr 2022): Traxero North America announces combination of towing software providerssource: Tow Times (Oct 2024): Autura and Traxero join forcessource: PR Newswire (14 Jan 2025): Michael Winton joins Autura as CEOsource: Autura (2 Sept 2026): new leadership team members and support consolidation

Omadi, Tracker and InTow are not on Autura's product page

Autura's towing management page markets three dispatch products: TraxeroGo, Dispatch Anywhere and TOPS. Omadi, Tracker and InTow, all part of the 2022 lineup, are not named on it, and omadi.com did not load when we checked. We found no retirement notice. But if you might be asked to move inside the family anyway, compare the field before you re-implement. A move to us is the same amount of work as a move to TOPS, and we do the migration for free.

source: Autura: towing management software (traxero.com redirects here)source: Newswire (Apr 2022): Traxero North America announces combination of towing software providerssource: SourceForge: Omadi listing

State rules written down, not enforced

A private property tow in California needs a signed authorization and a police notice within 60 minutes of removal. In Texas the storage facility has two hours from accepting the vehicle, and the first owner letter is due by day 5 for Texas plates. Miss it and storage beyond five days can't be charged. In Fieldproxy a private property tow can't move to Hooked until the authorization and before photos are in, the police notice runs on a timer with the tracking number, and the letters are created on the right day from the registering state.

source: California Vehicle Code 22658, removal from private propertysource: TDLR: VSF notification process

A release bill that can't go over the cap

Autura's lot screens calculate charges automatically, which is a real strength. What we'd ask any vendor to show you is the cap: Texas allows $22.85 a day for storage on vehicles 25 feet or less and a single $50 notification fee, and bans environmental and notary fees. In Fieldproxy the fee schedule is loaded per state and per city, the bill is built from tow type, duty class and days on the lot, and a disallowed fee simply can't be added at the window.

source: Autura: towing management software (traxero.com redirects here)source: TDLR: VSF fees and other charges

Mixed work on one fleet

Autura positions Dispatch Anywhere for light to medium-duty motor club, police and standard private property work, and TOPS for multi-location and municipal impound. Plenty of shops are both, plus heavy recovery, dealer transfers and fleet accounts. We set up one tow record whose rules follow its type: the club's job number and ETA on a club call, the agency's clock on a rotation call (Colorado Springs allows 45 minutes), the authorization and notices on a private property tow, and account statements for dealers and fleets.

source: Autura: Dispatch Anywheresource: Autura: TOPSsource: Colorado Springs Police SOP DL-1320-01, rotational tows

The 2am phone call

Owners call at night to ask where their car is and what they owe. Autura's towing pages don't list AI agents for calls, texts or email. Fieldproxy's AI agents can be set up to find the tow by plate, VIN or location, read the amount due from your fee schedule and tell the caller the lot address, release hours and what ID to bring, then log the call on the tow. Each change an agent proposes can require a person to confirm.

source: Autura: towing management software (TraxeroGo, Dispatch Anywhere, TOPS)

Stay on Dispatch Anywhere, TOPS or Omadi if

  • Most of your volume is motor club calls. Autura's products connect to the club networks and import payment confirmations. Fieldproxy takes club jobs through its open API or by reading club dispatch emails into jobs, which is not the same as a native connection. Test it with your clubs before you move.
  • You rely on TowLien's state-approved lien search and notices, or sell unclaimed vehicles on Autura Marketplace. We build the notice letters and lien file, but we are not a lien search service or an auction.
  • You also use Autura's government tools with a local agency (rotation, impound, private tow intake). Staying on one vendor end to end may matter more than anything we offer.
  • You run TOPS or Dispatch Anywhere, it's getting investment, and support has been fine. Don't switch to fix a problem you don't have.
  • You're a new owner-operator who wants to start tonight. TraxeroGo is free with no contract; Fieldproxy starts with a call and a guided setup.
How Fieldproxy is set up for towing companies

Before you go

What to export from Dispatch Anywhere, TOPS or Omadi, and how

Autura's pages say its team works with new customers on data migration, but we found no public help article describing how a customer exports their own data from Dispatch Anywhere, TOPS, Omadi or Tracker. So treat every row below as a written request to Autura support, made before you give notice, and check each file opens and is complete. Ask for CSV or Excel, not PDF, wherever the data is a list.

DataHow to get it out of Dispatch Anywhere, TOPS or OmadiWhat happens to it in Fieldproxy
Vehicles on the lotAsk Autura for every stored vehicle: lot and space, gate-in date and time, tow type, VIN, plate and state, holds, owner and lienholder lookup.Each becomes a lot record with its exact gate-in time, so storage days and notice day counts carry on without a reset.
Notices and lien files in progressAsk for notices sent per vehicle with dates and certified mail numbers, and any TowLien files in progress.Loaded per vehicle, with the abandonment and earliest sale dates recalculated and checked against your copy before go-live.
Open and unbilled towsAsk for a CSV of tows not yet invoiced or paid, with times, miles and add-charges.Open tows land at the right status. Unbilled work is flagged so nothing slips at cutover.
Motor clubs and rate agreementsAsk for each club account and its rates; keep your signed rate agreements on file.A rate agreement per club: hook-up, per mile, winching per half hour, dollies per event, storage per night, GOA.
Property, dealer and fleet accountsAsk for customer and account lists with contacts, billing terms and, for property accounts, authorized signers.Property accounts get signers, parking rules, sign photos and a portal. Dealers and fleets get statements.
Unpaid invoicesRun an accounts receivable report for clubs and accounts, and check it against QuickBooks.Open balances carried over; new invoices sync to QuickBooks, Xero or Sage.
Trucks and driversAsk for trucks with permit, insurance and inspection dates, and drivers with license class and certifications.Truck and driver records, so jobs only go to a truck and driver that fit the tow.
Call history and photosAsk for call history and photos for the period your state requires (California asks for three years on private property tows).Archived and searchable. Recent history can be loaded onto accounts if you want it.

source: Autura: towing management software (TraxeroGo, Dispatch Anywhere, TOPS)source: Autura: towing management software (traxero.com redirects here)source: California Vehicle Code 22658, removal from private property

What doesn't come with it

What doesn't export, and what we rebuild

An export carries records, not the way your account is set up. Here is what to expect, and who does the work.

Motor club connections

The digital links between your Autura product and each club stop when the product stops. Ask each club how it will send jobs to you after the switch, and keep the club's own tool (Swoop, the HONK Partner app) working throughout. Agero still wants photos before the vehicle is touched for any add-charge.

source: Autura: towing management software (traxero.com redirects here)source: Agero: network guidelines for add-charges (Jan 2026)

TowPay, TowLien and BudgetGPS

Payments, lien search and fleet tracking are separate Autura services tied to its software. List which ones you use, and agree what replaces each before you cancel: a card processor or Tap to Pay, your lien and title lookup route, and your GPS provider.

source: Autura: towing management software (TraxeroGo, Dispatch Anywhere, TOPS)

Rate tables, rules and report layouts

Charge rules, invoice layouts and saved reports are settings, not data. Screenshot them and send us a sample invoice, release receipt and owner letter. We rebuild them as your own fee schedules and templates.

The QuickBooks link

Autura lists a QuickBooks integration. That mapping ends with the product. Close the month in the old system first, then the new sync starts clean, tested against a real month before anyone relies on it.

source: Autura: towing management software (traxero.com redirects here)

Do these before you cancel Dispatch Anywhere, TOPS or Omadi

  • Read your Autura agreement for the notice period and renewal date, even though Autura says there are no long-term contracts.
  • Request every export in writing, and check each file opens and matches your lot count.
  • Write down every vehicle's gate-in date, notices sent and next notice day. This list is your safety net.
  • Ask each motor club how it will dispatch to you after the switch, and get it working before you move club volume.
  • Decide what replaces TowPay, TowLien and BudgetGPS if you use them.
  • Run one full month of invoices through the new accounting sync before switching the old one off.
  • Keep the old system read-only until the last stored vehicle from it is released or sold.

Send us your Dispatch Anywhere, TOPS or Omadi export and see it running in your setup.

Get Demo

Live within a day

The move from Dispatch Anywhere, TOPS or Omadi, day by day

Migration to Fieldproxy is free and assisted: our team builds your setup and moves your data. You're live within a day, meaning your first team runs real jobs in Fieldproxy the day after the call. How fast everyone else follows is your call.

Live within a day means your first team runs real tows the day after the setup call, not that every club, agency and lot has moved. A big lot, several states or slow club onboarding add time, and we say so on the first call.

What happens on go-live day
  1. 1

    Before the call: agreement, exports, pilot stream

    You, about an hour

    Check your Autura terms and send the export request. Pick a pilot stream: usually private property tows for one or two property accounts, or one police agency's rotation calls, with two drivers. Motor club volume moves last.
  2. 2

    The call: one tow from phone to payment

    You and Fieldproxy, 30 minutes

    Walk us through one real tow of each type you run: how it comes in, what the driver photographs, the authorization, the police notice, the lot, the letters and the release bill. Tell us your states and cities, and send a sample invoice, receipt and letter.
  3. 3

    We build your setup

    Fieldproxy's team

    Tow types and statuses, truck and driver records with permit and license matching, rotation lists, property accounts with the authorization form, required photo sets, police notice timers, fee schedules by state and city, notice letters and the release checklist, on the web and the Android and iOS driver app.
  4. 4

    We move your data, free

    Fieldproxy's team and Fieldproxy AI

    Accounts, trucks, drivers, open tows and every stored vehicle with its exact gate-in time and notices sent, checked line by line against your lot list. A QR code per lot space if you want one.
  5. 5

    We connect the books

    Fieldproxy's team, with your bookkeeper

    Two-way sync with QuickBooks Online, Desktop or Enterprise, Xero or Sage for club and account invoices, tested against a real month. Exactly what syncs is agreed in setup.
  6. 6

    Live: the pilot stream runs real tows

    The day after the call

    The pilot drivers take their tows on the Fieldproxy app: photos before the hook, the authorization signed on the phone, the police notice logged with its tracking number, the car checked into its space. Everything else stays on your Autura product.
  7. 7

    Weeks after: stream by stream, then read-only

    Your schedule

    Add rotation agencies and accounts next, then motor clubs once each dispatches cleanly. When all new calls are in Fieldproxy, the old system goes read-only and finishes any vehicles you chose not to migrate.

Cutover

Running Dispatch Anywhere, TOPS or Omadi and Fieldproxy side by side

For a short, dated window, both tools are open. Fieldproxy is there to replace Dispatch Anywhere, TOPS or Omadi, not to sit on top of it, so the rules below are about ending the overlap cleanly. Our view from moves we have run, not a sourced fact.

Each tow lives in one system

A tow starts and ends in the system that took the call: photos, notice, lot, letters, release and invoice. No tow is half in each, so nobody wonders which system has the tracking number.

Each stored vehicle has one clock

A vehicle already on the lot either stays in the old system until released or sold, or moves to Fieldproxy with its exact gate-in time and notices. Never both. Count the lot in both systems every morning until the old one is empty.

A fixed read-only date

Set the date the old system stops taking calls, ideally before your notice period ends. The Watcher agent flags missing police notices and upcoming letter days while your team is new to Fieldproxy.

The fear

What if a stored car misses its notice letter during the move?

A late first notice can cap the storage you're allowed to charge, and it pushes back the day you can sell. The lot is where a switch costs real money, so this is how we protect it.

  1. 1

    A printed lot list on day one

    Before anything moves, we produce one list of every stored vehicle with its gate-in date, notices sent and next due date, and you sign it off against the yard.
  2. 2

    Old vehicles can finish where they started

    You can leave existing stored vehicles in the old system until they are released or sold, and only take new tows in Fieldproxy. Nothing about their clocks changes.
  3. 3

    Migrated vehicles are checked one by one

    If you prefer to move them, each one comes across with its exact dates, and the calculated abandonment and sale dates are checked against your list before the old system goes read-only.
  4. 4

    An alert before every letter day

    From the first day, the lot office gets an alert ahead of each vehicle's notice day, and a letter task with the right template for the registering state.

Where things live

Dispatch Anywhere, TOPS or Omadi terms and where they go in Fieldproxy

So dispatchers, drivers and the lot office know where things went on the first day. Exact names follow your Autura product and are agreed on the call.

In Dispatch Anywhere, TOPS or OmadiIn Fieldproxy
Job queue and active job mapDispatch board with live truck map, promised ETA or rotation clock per job
Motor club jobsTow record with club job number, ETA and rate agreement, received through the open API or parsed club emails
Police and rotation callsRotation lists per agency with zone, position, response clock and refusal log
PPI / private property impoundProperty accounts with signers and sign photos; authorization form and photo set required before Hooked
Driver mobile appDriver app in 27 languages: photos, signatures, GPS check-in, Tap to Pay
Lot management and vehicle agingLot records by space with gate-in time, holds and aging, counted daily
Automatic charge calculationFee schedules by state and city; release bill capped, disallowed fees blocked
TowLienOwner notice letters on the state's day count, certified mail numbers, lien sale file (no lien search service)
TowPayTap to Pay in the field and pay links for owners and accounts
BudgetGPSGPS check-in from the driver app; your existing GPS provider where you want live tracking
QuickBooks integrationTwo-way sync with QuickBooks Online, Desktop and Enterprise, Xero or Sage
ReportsDashboards and scheduled reports, plus ChatGPT, Claude or Copilot through our MCP server

Straight answers

Switching from Dispatch Anywhere, TOPS or Omadi: FAQ

How long does it take to switch from Dispatch Anywhere, TOPS or Omadi to Fieldproxy?
You're live within a day: your first team runs real tows in Fieldproxy the day after the setup call, with free, assisted migration. Moving every stream of work, especially motor club volume and the stored vehicles on the lot, is on your schedule.
Is migration free?
Yes. We import and check your Autura exports, load every stored vehicle with its exact dates and build your tow types, fee schedules and letters with you. You pay for Fieldproxy, not for the move. See the pricing page for how plans work.
How do I get my data out of Dispatch Anywhere, TOPS or Omadi?
We found no public article describing a self-serve export, so ask Autura support in writing for CSV or Excel files of stored vehicles with notice dates, open and unbilled tows, accounts, trucks, drivers and call history with photos. Do it before you give notice, and check every file.
Who owns Dispatch Anywhere, TOPS and Omadi now?
Autura. They were combined as Traxero North America in April 2022, and Traxero merged with Autura in October 2024. traxero.com now redirects to Autura, whose September 2026 release names Rudy Nieto as CEO and says support for all products is moving to one support center.
Will my motor club calls still come in?
Fieldproxy takes motor club jobs through its open API or by reading the club's dispatch emails into jobs, keeping the club's job number and promised ETA. That is not the same as the native connections Autura and Towbook have, so we test each of your clubs during the pilot and move club volume last.
Does Fieldproxy work with QuickBooks, Xero or Sage?
Yes. Two-way with QuickBooks Online, QuickBooks Desktop and Enterprise, Xero, and Sage (invoices, bills, credit notes and suppliers), plus Zapier. Exactly what syncs is agreed and tested during setup. Fieldproxy is not itself a general ledger.
Does the driver app work without signal?
The driver app is built for the shoulder of a road: photos keep their time and GPS stamp, and required photo sets are enforced before Hooked. Tell us where your drivers lose signal and we test those spots during the pilot.
Can AI agents answer owner calls about impounded cars?
Yes. Fieldproxy's AI agents work on phone, text and email. For a towing company they can be set up to find the tow by plate or VIN, give the lot address, amount due from your fee schedule and release hours, and log the call. Every change an agent proposes can require a person to confirm.
Can ChatGPT or Claude work with my towing data?
Yes. Fieldproxy's official MCP server lets ChatGPT, Claude and Copilot read your data and do anything the app can do, such as listing vehicles nearing their sale date or drafting a club invoice follow-up, with a person confirming each change.

Leave Dispatch Anywhere, TOPS or Omadi without the leap. Live within a day.

A 30-minute call about how a job runs in your business, and a Dispatch Anywhere, TOPS or Omadi export. We show you your own setup and data running in Fieldproxy before you commit.

Plan my switch

Free, assisted migration. One price per company, unlimited users. Changes are a conversation.