Quotes to jobs
How do I split one approved quote into jobs for different crews or trades?
Keep the approved quote as the one commercial record and create one job per service line (or group of lines), each with its own crew or subcontractor, scope, dates and sign-off, all linked back to the quote. Sequence the jobs so one cannot start until the job before it is signed off, and show each crew only its own scope and materials. Invoice from the quote, not from the jobs, so the customer gets the single price they approved however many crews did the work.
- Tag every quote line with a trade or crew type before the quote is sent. The split then needs no retyping.
- One job per crew per phase. A job with two crews on it has no clear owner for the sign-off.
- Jobs carry dependencies: lighting cannot start until the patio is signed off.
- The customer sees one total and one invoice. Each crew sees its own lines and no prices.
- A change on site is a change order against the quote, raised from the job it affects.
This suits quotes with two to about ten services done over days or weeks. A build with dozens of trades, a critical path and monthly payment applications needs project scheduling on top, not only a quote split.
Facts checked as of November 2026. Sources at the end of the page.
Step by step
How splitting one quote into several jobs works, step by step
The split is decided when the quote is written, not after it is approved. If each line already knows which kind of crew does it, approval can create the jobs with nobody copying text between screens.
1. Give every quote line a trade or crew type
Add a field on the quote line or on the service in your price list: e.g. Excavation, Hardscape, Planting, Electrical, Plumbing. Lines that one crew does in one visit share a tag. The customer never sees the field.
2. Keep the customer price separate from the crew scope
The customer line says Paver patio, 600 sq ft, with one price. Behind it sits the material list and the task list the crew needs. The quote prints the first. The job prints the second.
3. On approval, create one job per tag
Approval is the trigger. Each job copies its own lines, the site, the contact, the access notes and the customer's photos, and stores the quote number and the quote line IDs it came from. The quote moves to a status such as Approved, in delivery.
4. Set the order
Each job gets a Depends on field that points to the job before it. A dependent job stays in a Waiting status and cannot be dispatched until the earlier job is signed off. Jobs with no dependency can run in parallel.
5. Assign each job to a crew or a subcontractor
In-house jobs go to the crew lead. Subcontracted jobs go out as a work order with a written scope and an agreed cost, which is your purchase order to that subcontractor. Sell price and cost are two fields, and the subcontractor sees only the cost.
6. Sign off each job on its own
Each job has its own checklist, photos and completion signature. The crew lead signs that the scope is done. Where the next crew depends on it, a supervisor or the next crew lead accepts the handover.
7. Send changes back to the quote
Extra work found on site is a change order: new lines, a new price, the customer's approval, linked to the job that raised it. The quote total changes once, and every later invoice follows it.
8. Invoice once, from the quote
When the last job is signed off, the quote moves to Ready to invoice and one invoice is raised for the approved total plus approved change orders, less any deposit. If the contract has stage payments, each stage is tied to a job sign-off, still against the one quote.
Failure modes
Why it goes wrong
The job does not inherit what was sold
A landscape and hardscape contractor who quotes patios, garden beds and lighting together told us that in a trial of another tool the quoted service tasks did not carry over to the job, and the job did not link back to the quote. The crew sheet was then typed again from the quote, which is where scope gets lost.
One work order, several crews, no owner
The same contractor wanted different services on one work order to go to different crews. When all of it sits on one job with one assignee, the second crew works from a phone call, and nobody can say which part is finished.
The customer's price and the crew's sheet are the same document
The buyer wanted the customer to see one bundled price per line while the crew work order printed the full material list. If the tool has only one view of a line, you either show the customer your material breakdown or send the crew out without it.
Each subcontractor needs a different brief
A property refurbishment firm with about 10 field people, half of them subcontractors, runs multi-phase jobs with several trades and needs a written work description per contractor, with comments coming back. One shared job note means the plumber reads the decorator's instructions.
Nothing happens after approval
A commercial HVAC and plumbing contractor with 40 to 50 jobs a day asked us what happens after a quote is approved. In many tools the answer is that a person has to notice. An approved quote with no jobs against it is revenue nobody has scheduled.
The last step, the invoice, has no trigger
The refurbishment firm described won deals dropping off the sales board with nothing to remind anyone that the job was complete and should be invoiced. With three or four jobs under one quote the risk is higher: each crew finishes, and nobody owns the moment when all of them have.
Options
Ways to do it
Seven real approaches. For each one, ask three things: do the jobs inherit their own lines, does each job get its own crew and sign-off, and does the customer still get one invoice.
| Approach | How the split works | Where it falls short |
|---|---|---|
| Retype the quote into separate jobs by hand | Works in any tool. The office creates a job per crew and pastes the right lines into each. | Nothing links the jobs to the quote or to each other, so sequencing, change control and the final invoice all depend on one person's memory. |
| Convert the same quote more than once (Jobber) | Jobber's help center says you can make as many jobs as you like from the same quote, from More Actions > Convert to Job. Jobs in Requires Invoicing for one client can be combined into a single invoice. | Each conversion pulls over all the quoted line items, so you delete the lines that belong to other crews from every job. Jobs on properties with different tax rates cannot be combined into one invoice. |
| Segments inside one job (Housecall Pro) | Housecall Pro recommends segments for a job that lasts more than one day or requires different technicians. Each segment is scheduled, started, finished and invoiced on its own, under one invoice number with sub-numbers such as #6-2, and segments can be grouped onto one invoice. | An approved estimate can be copied to a new job automatically (Settings > Estimates), but the copy creates a single segment and a segment you add starts blank, so the lines are moved by hand. Multiple segments cannot be added to one invoice if Progress Invoicing is enabled. |
| Sold estimate items booked into project jobs (ServiceTitan) | From a sold estimate you click Initiate Booking, check the estimate items you want, and choose Select Existing Job, optionally picking the assigned technician. Different items can go to different jobs in the same project. | Both jobs must sit in the same project, and it is a manual pick per item. Jobs booked from or added to a project are marked No Charge, and duplicating a job for another business unit needs account configuration by ServiceTitan support. |
| Sections and cost centers in a project job (Simpro) | A Simpro project quote is split into sections, such as Rough In, Fit Off and Commissioning, with cost centers under each. Options > Convert To > Project Job keeps one job, and each cost center moves on its own from pending to in progress, complete and invoiced. | It is one job with parts, not separate jobs, and service quotes have no sections. The convert article does not describe converting only part of a quote. |
| A work ticket per service (Aspire, landscaping) | The closest to automatic. After an opportunity is won, Aspire creates an individual work ticket for each service on the estimate, and a ticket can be dragged to a day, reassigned or split between crews. | Aimed at landscaping companies. The pages we read do not describe one ticket waiting on another ticket's sign-off. |
| A configurable field service platform (Fieldproxy) | Quote lines carry a trade tag, approval creates one linked job per tag, jobs have a depends-on rule and their own sign-off, subcontractor jobs go out through the subcontractor portal, and the invoice is raised from the quote. | The split rules are set up for your business during onboarding, not switched on from a menu. Projects with a Gantt view are there for longer builds. |
Vendor facts are from each vendor's own help pages, read in November 2026. Features change, so check the linked page.
Worked example
A worked example: one $48,600 quote, four jobs
Say a landscape contractor has a backyard quote approved for $48,600 with four service lines. The customer paid a 30 percent deposit on approval: $48,600 x 0.30 = $14,580.
| Job | Assigned to | Customer price | Depends on | Planned days |
|---|---|---|---|---|
| A. Site prep and excavation | In-house crew 1 | $6,400 | Nothing | Days 1 to 2 |
| B. Paver patio, 600 sq ft | In-house hardscape crew | $24,000 | A signed off | Days 3 to 7 |
| C. Garden beds and planting | In-house planting crew | $9,800 | B signed off | Days 8 to 9 |
| D. Landscape lighting, 14 fixtures | Electrical subcontractor, agreed cost $5,600 | $8,400 | B signed off | Day 8 |
| Total | $48,600 | 9 working days |
A worked example with made-up figures. 6,400 + 24,000 + 9,800 + 8,400 = 48,600.
Jobs C and D both wait on B and run on the same day with different people. The planting crew sees beds, plant list and quantities. The electrical subcontractor sees 14 fixtures, the transformer location and a cost of $5,600. Neither sees the $48,600.
On day 8 the customer asks for 4 more fixtures. The subcontractor raises it from job D, the office prices it at $600 a fixture, and the customer approves a $2,400 change order. The quote is now $51,000.
When C and D are signed off, one invoice goes out: $51,000 less the $14,580 deposit = $36,420. Margin on the lighting line is visible too: $8,400 + $2,400 sold, against the subcontractor's cost for 18 fixtures.
Without the link, the same job is four separate work orders, a deposit recorded somewhere else and a change agreed by text message. The usual result is an invoice for $34,020 and a $2,400 conversation three weeks later.
Before you buy
What to check before you choose a tool
Good signs
- One approval creates several jobs, and each job receives only its own lines.
- Every job shows the quote it came from, and the quote lists its jobs with their statuses.
- A job can be held until another job is signed off, and the dispatcher can see why it is waiting.
- The customer document shows one price per line while the crew document shows materials and tasks.
- Sell price and subcontractor cost are separate fields, with separate permissions.
- Each job has its own checklist, photos and signature, and its own assignee.
- A change order raised on a job updates the quote total and the final invoice.
- The quote can be invoiced once, or in stages tied to job sign-offs, with the deposit deducted.
Red flags
- Converting a quote always copies every line, and you delete the ones that do not belong.
- The second job or segment starts blank.
- The split is a list of assignees on one job, with one status and one signature.
- Jobs from the same quote can only be invoiced separately, or only together.
- Subcontractors need a paid seat to see their work order.
- Editing the quote after approval does not flow to the jobs, and nothing warns you.
- There is no report of approved quotes with unscheduled or unfinished jobs.
In Fieldproxy
Setting it up in Fieldproxy
Fieldproxy is configured around your process, so the split below is fields, statuses and rules set up for your account. Values marked e.g. are examples to replace with your own.
A trade tag on quote lines and price list items
Each service in your price list carries a crew type, e.g. Excavation, Hardscape, Planting, Electrical, and a default assignee type of in-house or subcontractor. The tag comes onto the quote line with the item.
Approval creates the linked jobs
When the customer approves from the quote link, or the office marks it approved, an automation creates one job per tag with that tag's lines, tasks and materials, linked to the quote. The quote moves to e.g. Approved, in delivery.
Depends on, and a Waiting status
Jobs carry a Depends on field. A job whose earlier job is not signed off sits in e.g. Waiting on previous trade and cannot be dispatched. For longer builds the same jobs sit under a project with a Gantt view, change orders and progress billing.
Crews see scope, subcontractors see their own cost
The technician app shows each crew its tasks, materials, checklist and photos, without customer prices. Subcontracted jobs go out through the subcontractor portal with a written scope and the agreed cost, and comments come back on the job.
Dispatch agent on who gets each job
The Dispatch agent proposes the crew for each job by skills, distance and cost, so the electrical job is offered to people who can do it and not to whoever is free.
Watcher agent on the gaps
The Watcher agent flags an approved quote with a job still unscheduled after e.g. 3 days, a dependent job booked before the job it waits on, and a quote whose jobs are all signed off but which has no invoice.
One invoice from the quote
The invoice is raised from the quote with approved change orders added and the deposit deducted, then synced to QuickBooks or Xero. In Command Center you can ask in plain English which approved quotes have unfinished jobs, or what is left to bill on one quote.
By country
When one of the crews is a subcontractor
Splitting a quote changes nothing for the customer, but each job you hand to a subcontractor creates a payment you may have to report. Keep the subcontractor's cost on the job so the totals come out by payee at year end.
United States: Form 1099-NEC
The IRS instructions say to file Form 1099-NEC for each person to whom you have paid at least $2,000 in the course of your business during the year for services performed by someone who is not your employee. The instructions note that the threshold increased to $2,000 for tax years beginning after 2025 and may be adjusted for inflation from 2027.
United Kingdom: Construction Industry Scheme
A contractor paying a subcontractor for construction work deducts 20% for registered subcontractors, 30% for unregistered ones and 0% where the subcontractor has gross payment status. The deduction is worked out on the invoice after taking away VAT and what the subcontractor paid for items such as materials, so the job needs labor and materials as separate cost lines.
How switching works
How switching to Fieldproxy works
We move your data over and set the system up to the way you already work. Fieldproxy replaces the old tool; it does not run alongside it.
Bring three real quotes that were split
One simple, one with a subcontractor and one that went wrong. Show us the quote, the crew sheets, who did what in which order, and the invoice that went out.We build your split rules
Trade tags on your price list, the job created for each tag, the depends-on order, the sign-off for each job and the invoice from the quote, set up before you commit.Price list, customers and open quotes come across
Services, kits, materials, customers, sites and quotes that are approved but not finished are loaded from your current tool or spreadsheets, so work in progress is not retyped.Crews and subcontractors get their own view
In-house crews get the Android or iOS app. Subcontractors get their work orders through the portal. The first approved quote creates its jobs with nobody copying lines.
FAQ
Questions people ask
- Can one approved quote be split so different services go to different crews?
- Yes. Tag each quote line with the crew type that does it, and create one job per tag on approval. Each job gets its own crew, dates and sign-off and stays linked to the quote.
- What happens after a quote is approved?
- It should create work without anyone noticing it first: the jobs appear unscheduled on the dispatch board, the quote shows them, and something flags any that are still unscheduled after a few days. If approval only changes a status, ask who is meant to act on it.
- Can the customer see one bundled price while the crew sees the full material list?
- Yes, if the tool keeps the customer line and the crew scope as two views of the same item. The quote prints the line and its price. The job prints tasks, materials and quantities with no prices.
- Should I split by quote line or by phase?
- By crew and visit. If the same crew does two lines in one visit, that is one job. If one line needs two crews, such as a patio that needs excavation first, split the line into two jobs with a dependency.
- Can each subcontractor get their own work description and send comments back?
- Yes. Each subcontracted job is its own work order with its own scope, photos and agreed cost, and the subcontractor replies on that job. They do not see the other trades' jobs or the customer's price.
- How do I invoice once when four jobs finish on different days?
- Invoice from the quote. The trigger is the last job's sign-off, and the amount is the approved quote plus approved change orders, less any deposit. If you bill in stages, tie each stage to one job's sign-off.
- What if the customer changes the scope after the jobs exist?
- Raise a change order on the affected job, get it approved, and let it update the quote total. Do not edit the original quote lines, because the jobs created from them will no longer match.
- When is a quote split not enough?
- When the work has dozens of activities, float, retainage or monthly payment applications. That is a project with a schedule. Fieldproxy has projects with a Gantt view, change orders, progress billing and retainage for that case.
Sources
Competitor details on this page come from the vendors' own pages and documentation, checked as of November 2026. Plans and prices change, so check the vendor's current page before you decide.
- Jobber Help Center: Converting a quote to a job: https://help.getjobber.com/en/articles/converting-a-quote-to-a-job/
- Jobber Help Center: Invoice basics: https://help.getjobber.com/hc/en-us/articles/115009685047-Invoice-Basics
- Housecall Pro Help Center: How can I use Segments?: https://help.housecallpro.com/en/articles/1940305-how-can-i-use-segments
- Housecall Pro Help Center: Job Segments Overview: https://help.housecallpro.com/en/articles/1158813-job-segments-overview
- Housecall Pro Help Center: How to copy or convert jobs and estimates: https://help.housecallpro.com/en/articles/2883009-how-to-copy-or-convert-jobs-and-estimates
- Housecall Pro Help Center: Automate job creation from approved estimates: https://help.housecallpro.com/en/articles/12119814-automate-job-creation-from-approved-estimates
- ServiceTitan Help: Book sold estimate items into existing jobs: https://help.servicetitan.com/commercial/docs/book-sold-estimate-items-into-existing-jobs
- ServiceTitan Help: Manage and book jobs in a project: https://help.servicetitan.com/docs/manage-and-book-jobs-in-a-project
- Simpro Help Guide: Structure your project: https://helpguide.simprogroup.com/Content/Service-and-Enterprise/Structure-Your-Project.htm
- Simpro Help Guide: Convert a quote: https://helpguide.simprogroup.com/Content/Service-and-Enterprise/Convert-a-Quote.htm
- Aspire Guide: Creating an estimate: https://guide.youraspire.com/docs/creating-an-estimate
- Aspire: Scheduling features: https://www.youraspire.com/features/scheduling
- IRS: Instructions for Forms 1099-MISC and 1099-NEC: https://www.irs.gov/instructions/i1099mec
- GOV.UK: Construction Industry Scheme, make deductions and pay subcontractors: https://www.gov.uk/what-you-must-do-as-a-cis-contractor/make-deductions-and-pay-subcontractors
Related
Keep reading
- Hide pricing from subcontractors
- Subcontractor progress claims on the job card
- Link one purchase order to many jobs or sites
- Turn won Pipedrive deals into jobs
- What is the best field service software for a 5-10 person HVAC team?
- Cheaper ServiceTitan alternatives for small plumbing and HVAC companies, without payment processor lock-in