FieldproxySwitching guide ยท sources checked 19 November 2026

How to switch from Swept without a single night where a cleaner can't clock in

Short answer: check whether you pay Swept monthly or yearly first (monthly plans can be cancelled any time; a yearly plan runs to its term). Then save your time entries, download the inspection reports your clients care about as PDFs, and ask Swept for a CSV of locations, checklists, cleaners, schedules and clients, or pull them through Swept Connect if you have it. Rebuild each building as an area list, move one supervisor route at a time starting on the first night of a pay period, and keep Swept readable until a fixed date.

With Fieldproxy, migration is free and assisted and you're live within a day: your first building or route runs real shifts in Fieldproxy the night after the call, with its own areas, checklists and inspection form. Every other building moves on a schedule you set. One price per company, unlimited users, so cleaner turnover never changes the bill.

Leaving Swept? See your setup first

Send us a Swept export. We build your stages, forms and data in Fieldproxy, free, before you decide.

Book your demo

A video call with our team

Number of employees

Why teams leave

Why teams leave Swept, with the facts checked

Swept is good at what it was built for: getting the nightly crew to the right building, proving they were there, and showing the client photos of the work. It publishes its prices, prices by band of locations with unlimited employees and subcontractors, and its homepage says plainly that residential and one-off businesses are better served elsewhere. Commercial cleaning companies that leave it usually haven't outgrown the clock-in. They've hit a gap before or after the shift. Each point below is checked against Swept's own pages on 19 November 2026.

The bid lives in a spreadsheet

Swept's feature and pricing pages list no bid builder, area measurement or production-rate calculator. So the walkthrough, the square feet and the hours you priced sit in a spreadsheet, and the building gets typed again into Swept when you win it. In Fieldproxy the bid is the building: each area's square feet, floor type and tasks run through your production rates (ISSA 612 values or your own time studies) to give minutes per night and headcount, and the same record becomes the nightly route once the contract is signed.

source: Swept: janitorial software for commercial cleaningsource: Swept pricing (Optimize, Scale, Accelerate; Swept Connect)source: ISSA: How to calculate cleaning times

A location with a checklist, not an area list

Swept ties clock-ins, checklists, photos and messages to the location, which is a sound way to prove a shift happened. Contracts are written by area: restrooms daily, carpeted offices twice a week, a target cleanliness level per room. When the software only knows the building, the bid, the route and the inspection sample drift apart. Fieldproxy holds Client, Building, Floor and Area, and each area carries its tasks, frequency and level, so cleaners see tonight's areas in route order.

source: Swept: janitorial software for commercial cleaning

Inspections that don't carry the contract's clock

Swept has photo inspections and reports, and they are a big part of why clients trust it. Public contracts go a step further and charge for failures: North Carolina DOT's 2024 rest-area contract deducts $250 per empty dispenser and allows 2 hours to correct after a notice. Tracking each deficiency against that clock isn't on Swept's published feature list. In Fieldproxy a failed item needs a photo, opens with the contract's correction time, and closes only with the fix photo and a re-inspection score. Deductions sit in a log you can dispute from.

source: Swept pricing (Optimize, Scale, Accelerate; Swept Connect)source: NCDOT rest area janitorial proposal (April 2024): deductions and correction times

Accounting stops at QuickBooks Online payroll

Swept's one named sync sends approved hours to QuickBooks Online payroll, on Scale and Accelerate. Custom integrations are an Accelerate feature, and Swept Connect (its API, webhooks and MCP) is an add-on on Scale. If your books are in QuickBooks Desktop, Xero or Sage, or you want monthly contract invoices and extra-work invoices to sync, ask Swept what that costs. Fieldproxy syncs two-way with QuickBooks Online, Desktop and Enterprise, Xero and Sage, and exactly what syncs is agreed and tested during setup. Fieldproxy does not run payroll, so payroll stays where it is today.

source: Swept pricing (Optimize, Scale, Accelerate; Swept Connect)

Tenants still call, text and email

Swept has location messaging with cleaners and clients, translated into 150+ languages, which is a real strength. It doesn't list agents that answer the phone or the facility manager's emails. In commercial cleaning that is where spills, missed rooms and extra-work requests arrive, often after hours. Fieldproxy's AI agents answer calls, texts and emails, log the request against the right building, price extra work at the contract rate for the client to approve, and ask a person before anything is sent.

source: Swept pricing (Optimize, Scale, Accelerate; Swept Connect)

Takeovers and compliance are dates, not clock-ins

Winning a building in California means keeping the previous contractor's janitors (4+ months on site) for 60 days, with a written offer and 10 days to accept; New York City sets 90 days. California also requires yearly registration with the Labor Commissioner and three years of daily start and end times. These are checklists, rosters and due dates. Fieldproxy holds a takeover checklist per contract, training records per cleaner and renewal dates with reminders, next to the shifts.

source: California Labor Code 1061, Displaced Janitor Opportunity Act (FindLaw)source: NYC DCWP: Displaced Building Service Workers Protection Actsource: California DIR: janitorial service providers and contractors

Stay on Swept if

  • Your real problem is no-shows and proving the work to clients, and Swept is solving it. Don't switch to fix a problem you don't have.
  • You want to sign up and set yourself up today, by card. Swept's Optimize and Scale plans check out online with published prices. Fieldproxy starts with a call and a guided setup.
  • You only need approved hours sent to QuickBooks Online payroll. Swept does that on Scale, and Fieldproxy runs no payroll or HR.
  • You already use Swept Connect's MCP with ChatGPT or Claude and it does what you need. Assistant access is not unique to us.
  • Your cleaners need a language outside the 27 the Fieldproxy app runs in. Swept translates messages into 150+ languages.
  • You're on yearly billing with months left. Build and test now, and set the switch for the term end.
How Fieldproxy is set up for commercial cleaning companies

Before you go

What to export from Swept, and how

Swept's pricing page says time entries are available for export on every plan, and its help center explains how to download each inspection as a PDF (Reports, Inspection Reports, open the inspection, Request PDF; managers and admins on the web app). We found no help article that describes a CSV export of locations, checklists or schedules, so for those, ask Swept support for a CSV, or use Swept Connect's API if you are on Scale with the add-on or on Accelerate. Get all of it before your billing term ends.

DataHow to get it out of SweptWhat happens to it in Fieldproxy
LocationsAsk Swept for a CSV of locations with addresses, instructions and security details, or pull them through Swept Connect.Each becomes a building with floors and areas. Alarm codes and key procedures move separately and securely, and keys are issued per person.
Cleaning checklistsAsk Swept for the checklist per location; if it only comes as a screen, screenshot each one.Split into tasks per area with a frequency and a target level, so the checklist matches the contract scope.
Cleaners and subcontractorsAsk for a CSV in the same shape as Swept's cleaner import template: name, phone, email, which locations each is cleared for.Unlimited users, each with a role and the app in their own language. Subcontractors get a login or a job link.
Shift schedulesAsk Swept for the recurring schedule per location, or read it through the API.Nightly shifts per building with route order, start times and the bid hours to measure against.
Time entries (clock-ins)Export time entries from Swept; its pricing page lists this on every plan.Kept as an archive for payroll disputes and record keeping (California asks for three years). Optionally loaded as history per building.
Inspection reportsReports, Inspection Reports, open each inspection, Request PDF. Do the ones clients will ask for at renewal.Attached to each building's history. New inspections are scored per area, so scores carry on from the first night.
Work orders, one-time cleanings, supply requestsAsk Swept for a CSV of open items, or pull them through the API (these are Scale features).Open work orders become jobs at the right stage; supply requests become stock per building closet with reorder levels.
Clients and portal usersAsk Swept for client contacts per location.Client contacts on each building, with a portal or per-building links for reports, approvals and requests.

source: Swept pricing (Optimize, Scale, Accelerate; Swept Connect)source: Swept Support Center: how do I download inspection reportssource: Swept Support Center: how do I import cleaners

What doesn't come with it

What doesn't export, and what we rebuild

An export carries records, not the way your account is set up. Here is what to expect, and who does the work.

Alert rules and geofences

No-show and late alerts and the GPS check around each building are settings, not records. Note who gets which alert and when, and we set the same rules up in Fieldproxy: a supervisor alert when nobody has checked in by shift start, built as an automation.

source: Swept: janitorial software for commercial cleaning

Message threads

Swept's location messages, and their translations, live in Swept. We found no documented export. Screenshot any thread that records a client agreement, and keep Swept readable until the switch-off date.

The QuickBooks payroll link and Swept Connect

The QuickBooks Online payroll mapping, any webhooks and anything built on Swept's API stop when Swept stops. List each one before you cancel, and agree what replaces it. For payroll that is usually an approved-hours export to whoever runs payroll today.

source: Swept pricing (Optimize, Scale, Accelerate; Swept Connect)

Reports and profit by location

Profit and loss by location (Scale) is a report, not data you carry over. Save the last few months as PDFs. In Fieldproxy the comparison that matters most, bid hours against clocked hours per building, is built from day one.

source: Swept pricing (Optimize, Scale, Accelerate; Swept Connect)

Do these before you cancel Swept

  • Check whether you pay Swept monthly or yearly, and your renewal date. Monthly can be cancelled any time; a yearly plan runs to term.
  • Export every time entry for every cleaner, and keep the files for at least three years.
  • Download the inspection PDFs your clients may ask for at renewal or in a dispute.
  • Get the CSVs (or API pulls) of locations, checklists, cleaners, schedules, open work orders and client contacts, and check they open.
  • Write down the alert rules, who gets each one, and the geofence around each building.
  • Run one full pay period through the new system before you turn off Swept's QuickBooks payroll link.
  • Tell clients with portal access where their reports will come from next month.

Send us your Swept export and see it running in your setup.

Get Demo

Live within a day

The move from Swept, day by day

Migration to Fieldproxy is free and assisted: our team builds your setup and moves your data. You're live within a day, meaning your first team runs real jobs in Fieldproxy the day after the call. How fast everyone else follows is your call.

Live within a day is when the first building runs real shifts, not a deadline for every building. Many buildings, a big takeover in progress or a payroll change add time, and we say so on the first call.

What happens on go-live day
  1. 1

    Before the call: billing term, exports, pilot building

    You, about an hour

    Find your Swept billing term. Export time entries, download key inspection PDFs, and ask Swept for the CSVs. Pick a pilot: one building or one supervisor route, ideally one with a demanding inspection or a deduction schedule. Pick the first night of a pay period to start.
  2. 2

    The call: one building, from walkthrough to monthly report

    You and Fieldproxy, 30 minutes

    Walk us through one building: its areas, tasks and frequencies, the hours you bid, how a shift starts, how inspections are scored, what the client receives each month, and how extra work is approved and billed. Send the exports and a sample client report.
  3. 3

    We build your setup

    Fieldproxy's team

    Buildings with floors and areas, tasks per area, your production rates, nightly shifts in route order, an inspection form per area type with required photos on failures, deficiency correction clocks, the client QA report, and the screens each role sees on the web and the Android and iOS app.
  4. 4

    We move your data, free

    Fieldproxy's team and Fieldproxy AI

    Locations, cleaners, schedules, clients and open work orders, mapped and checked for duplicates. Inspection PDFs attached to each building's history. A QR code per building or area.
  5. 5

    We connect the books

    Fieldproxy's team, with your bookkeeper

    Two-way sync with QuickBooks Online, Desktop or Enterprise, Xero or Sage for contract and extra-work invoices, checked against a real month. Approved hours go to your payroll provider as an export, since Fieldproxy does not run payroll.
  6. 6

    Live: the first building runs tonight's shift

    Night one

    Cleaners at the pilot building check in on the Fieldproxy app, in their own language, with GPS check-in. They mark each area done, skipped with a reason or not reached, and log supplies. The supervisor inspects on the same app. Every other building stays on Swept.
  7. 7

    Weeks or months: route by route, then switch off

    Your schedule

    After one full pay period, compare hours, alerts and inspection scores, then move the next supervisor route, always on the first night of a pay period. When the last building has moved, take final exports and let Swept's term end.

Cutover

Running Swept and Fieldproxy side by side

For a short, dated window, both tools are open. Fieldproxy is there to replace Swept, not to sit on top of it, so the rules below are about ending the overlap cleanly. Our view from moves we have run, not a sourced fact.

Each building lives in one system

A building that has moved clocks in, inspects and reports only in Fieldproxy. A building still on Swept stays there. No cleaner clocks in twice, and no client gets two reports.

Move on a pay period boundary

Start each route on the first night of a pay period, so every cleaner's hours for that period come from one system. Check one real payroll run from Fieldproxy's approved hours before you move the next route.

A fixed switch-off date

Keep Swept readable, not in use, and set the date it goes off, ideally the end of your billing term. The Watcher agent flags missed check-ins and overdue deficiencies while supervisors are new to Fieldproxy.

The fear

What if a cleaner can't clock in on the first night?

Night crews work when the office is closed, and a cleaner who can't get in or can't clock in is a missed building and a payroll argument. This is how to make the first night boring.

  1. 1

    A practice shift in daylight

    Before the first real night, the supervisor and one or two cleaners run a practice shift at the building: check in, open the areas, mark tasks, log a supply and send a photo. Anything confusing is fixed that afternoon.
  2. 2

    The app in their language, the buildings in their words

    Each cleaner sees the app in their own language (27 are available), and areas keep the names your crew already uses. The change is the app, not the building.
  3. 3

    An alert if nobody checks in

    A supervisor gets an alert when nobody has checked in at a building by shift start, the same job Swept's no-show alert did. The supervisor is on site or on call for the first night.
  4. 4

    One building at risk, not the company

    Only the pilot building moves. If a checklist or rule is missing, one crew finds it, and every other building keeps running on Swept until you decide to move it.

Where things live

Swept terms and where they go in Fieldproxy

So supervisors and cleaners know where things went on the first night. How takeovers and periodic work are set up is agreed on the call.

In SweptIn Fieldproxy
LocationsBuildings with floors and areas: square feet, floor type, fixtures, target level
Location instructions and security detailsBuilding access notes; keys, alarm codes and badges issued per person
Cleaning checklistsTasks per area with frequency, in route order on the cleaner's phone
Shift schedulingNightly shifts per building, with bid hours to compare against clocked hours
GPS clock in and outGPS or geofenced check-in at the building, QR code per building or area
No-show and late alertsAutomations that alert the supervisor when nobody has checked in by shift start
Photo inspectionsInspections scored per area, required photos on failures, deficiencies with the contract's correction clock
Work orders and one-time cleaningsJobs and extra-work requests priced at the contract rate, approved by the client
Supply requestsStock per building closet with reorder levels and use against the bid allowance
Location messaging (150+ languages)App in 27 languages; AI agents on phone, text and email
Client portalClient portal and per-building links: QA reports, approvals, requests
QuickBooks Online payrollNo payroll: approved hours exported to your payroll provider; invoices sync two-way with QuickBooks, Xero or Sage
Swept Connect (API, webhooks, MCP)Open API and an MCP server for ChatGPT, Claude and Copilot, with a person confirming each change

Straight answers

Switching from Swept: FAQ

How long does it take to switch from Swept to Fieldproxy?
You're live within a day: the first building or supervisor route runs real shifts in Fieldproxy the night after the call, with free, assisted migration. Moving every building is on your schedule, usually route by route, each starting on the first night of a pay period.
Is migration from Swept free?
Yes. We import and map your Swept exports, check them for duplicates and build each building's area list, checklists and inspection form with you. You pay for Fieldproxy, not for the move. See the pricing page for how plans work.
What can I export from Swept?
Swept's pricing page says time entries are available for export on every plan, and its help center explains how to download each inspection as a PDF from Reports, Inspection Reports. For locations, checklists, cleaners, schedules and clients, ask Swept support for a CSV, or use Swept Connect's API if you have it. Do it before your billing term ends.
Can I keep Swept for clock-ins and use Fieldproxy for the rest?
You can, but you would keep two copies of every building and every cleaner in step. It works best as a short overlap: move buildings one route at a time, and each building uses one system for clock-ins, inspections and reports.
Does Fieldproxy run payroll like Swept's QuickBooks payroll link?
No. Fieldproxy has no payroll or HR. Approved hours are exported to whoever runs your payroll. Invoices sync two-way with QuickBooks Online, Desktop and Enterprise, Xero and Sage, and exactly what syncs is agreed and tested during setup.
Does the cleaner app work in other languages and without signal?
The Fieldproxy app runs in 27 languages, so each cleaner can work in their own. Basements and plant rooms often have no signal, so tell us which buildings, and we test check-in and checklists there during the pilot.
Can ChatGPT or Claude work with my data?
Yes, and that is not unique to us: Swept offers an MCP server as part of Swept Connect, an add-on on Scale and included on Accelerate. Fieldproxy's official MCP server lets ChatGPT, Claude and Copilot read your data and do anything the app can do, such as creating jobs, schedules or invoices, with a person confirming each change.
Do AI agents answer tenant and facility manager calls?
Yes. Fieldproxy's AI agents answer calls, texts and emails, log spills, missed rooms and extra-work requests against the right building, chase approvals and send reminders. Each change an agent proposes can require a person to confirm, and agents are off until you switch them on.
Can Fieldproxy track inspection deficiencies against contract correction times?
Yes. A failed item needs a photo and opens a deficiency with the contract's correction time, for example 2 hours after notice. It closes with the fix photo and a re-inspection score, and contract deductions sit in a log with amount, notice time, corrected time and whether you dispute it.

Leave Swept without the leap. Live within a day.

A 30-minute call about how a job runs in your business, and a Swept export. We show you your own setup and data running in Fieldproxy before you commit.

Plan my switch

Free, assisted migration. One price per company, unlimited users. Changes are a conversation.