How to switch from InspectAll without losing a single crane's due date
Short answer: read your InspectAll agreement for the renewal date and notice period, then get your records out. InspectAll's help center documents three routes: the Asset History Report (a PDF per crane), form and folder report downloads, and Insights reports such as Export Forms and Priorities Found. It doesn't document a CSV export of accounts, locations and assets, so ask InspectAll for one or pull them through its open API. Then rebuild your checklists, move one coordinator's pod at a time right after its periodic cycle, and keep InspectAll readable until a fixed switch-off date.
With Fieldproxy, migration is free and assisted and you're live within a day: your first pod runs real inspections and repairs in Fieldproxy the day after the call, on your own cranes, forms and price list. Every other pod moves on a schedule you set. One price per company, with unlimited users, so every inspector, coordinator and plant contact gets a login.
Leaving InspectAll? See your setup first
Send us a InspectAll export. We build your stages, forms and data in Fieldproxy, free, before you decide.
Why teams leave
Why teams leave InspectAll, with the facts checked
InspectAll is a serious inspection tool. Its crane page names OSHA 1910.179, ASME B30.2 and CMAA Specification 75, picks the form from each crane's attributes and ships a load test certificate report. Most crane and hoist companies don't stop at the inspection, though. They quote the deficiencies, repair, load test and invoice. These are the reasons we see such companies look elsewhere, each checked against InspectAll's own pages on 19 November 2026.
The inspection is where the money starts
InspectAll's pages describe forms, findings, reports, scheduling, dispatch and a customer portal. We found no estimates, quote approval or invoices described. So a finding gets retyped into a quote somewhere else, then into a job, then into an invoice. In Fieldproxy you build the quote by ticking the crane's deficiencies, the plant approves it from a link, the approved lines become the repair job, and the invoice goes to QuickBooks, Xero or Sage when the job closes.
source: InspectAll: Why InspectAll (offline, API, webhooks, Zapier, portal, scheduling)source: InspectAll: Overhead crane and hoist inspections
A Zapier link that stops before the invoice
InspectAll's Zapier app is available on request to support or your account rep. Its listed triggers include New Account, Completed Form and New Priority-High, and its actions include Create Folder and Create Account. None are quotes or invoices. That leaves a person copying scope between three systems. Fieldproxy keeps the crane, the finding, the quote and the invoice as one chain of records, with two-way accounting sync agreed and tested during setup.
A flag is not a tag-out
In InspectAll, a form question can carry High, Medium or Low priority, which rolls up into a risk profile per account, and a finding is marked Resolved to clear it. That works for reporting. A remove-from-service finding needs more: OSHA 1910.179(l) wants the main or emergency switch opened and locked during repairs, and the condition corrected before the crane runs again. In Fieldproxy, a remove from service finding opens a tag-out record with the tag number, a photo of the tag, whether the switch is locked open and which plant contact was told. It clears only when the linked repair job closes.
source: InspectAll: Web app (priorities, risk profile, resolved findings)source: OSHA 29 CFR 1910.179, Overhead and gantry cranes
Load tests that follow the repair
InspectAll includes a load testing certificate report, and ticking Issue Certificate prints one for the crane. What it doesn't describe is linking that test to the repair that made it necessary. OSHA requires new and altered cranes to be load tested before first use, at no more than 125% of rated load unless the manufacturer says otherwise. In Fieldproxy, a job that replaced a load-bearing part is flagged load test required and can't close until the test record and certificate are on the crane.
source: InspectAll: Overhead crane and hoist inspectionssource: OSHA 29 CFR 1910.179, Overhead and gantry cranessource: OSHA standard interpretation, 28 Aug 2009: rated load tests for new and altered cranes
Due dates that belong to the crane
InspectAll has scheduling and dispatch on its web side. When you look at any tool, ask where next year's periodic lives if a job is deleted or an inspector leaves. Frequent and periodic intervals depend on how hard the customer runs each crane, normal, heavy or severe. In Fieldproxy, each crane carries its service class, and closing a periodic inspection writes that crane's next due date. A watch list shows cranes with nothing booked.
source: InspectAll: Why InspectAll (offline, API, webhooks, Zapier, portal, scheduling)source: Overhead Alliance: Overhead and gantry inspections 101
AI that does the follow-up
InspectAll's pages describe an open API, webhooks and Zapier. We didn't find AI agents or an assistant connector described. Fieldproxy's AI agents can be set up to read a hoist nameplate photo into the record, chase an unapproved deficiency quote, and alert a coordinator when a crane passes its periodic date with nothing booked. Our MCP server lets ChatGPT, Claude or Copilot ask which tag-outs have no approved quote, with a person confirming every change.
source: InspectAll: Why InspectAll (offline, API, webhooks, Zapier, portal, scheduling)
Stay on InspectAll if
- Inspection really is the whole job: you don't quote or repair, or your quoting and invoicing already work well in another tool.
- You want to start inspecting this afternoon. InspectAll has a self-serve 14-day trial with no card; Fieldproxy is a guided setup.
- Your auditors and customers are happy with InspectAll's prebuilt OSHA 1910.179 checklists and its load test certificate, and nobody retypes anything.
- You value that InspectAll is founder-owned and, by its own account, has never been acquired. There's no ownership change pushing you.
- You're mid-term or in the middle of a periodic cycle. Check the renewal date, finish the cycle, and plan the move for after it.
Before you go
What to export from InspectAll, and how
InspectAll's help center describes report downloads from the web and mobile apps, an Asset History Report per asset, and Insights reports on the web. It doesn't describe a bulk CSV export of accounts, locations or assets. Where a route isn't documented, we say so: ask InspectAll for the file, or use its open API.
| Data | How to get it out of InspectAll | What happens to it in Fieldproxy |
|---|---|---|
| Accounts, locations and areas | No CSV export documented. Ask InspectAll for a CSV of accounts, locations and areas, or pull them through its open API. | Customers, sites and bays, checked for duplicates, so the plant's 10 ton in bay 3 is where you expect it. |
| Cranes and hoists (assets) | No CSV export documented. Ask for a CSV of assets with model, serial, the attributes that pick each form, and any QR or barcode tag values. | Each crane and each hoist becomes its own record: capacity, CMAA class, service class, serial, hook ID and baseline throat. |
| Inspection history per crane | Asset History Report: open the asset and choose Download Report (web or mobile). It's a PDF, and only forms marked complete appear. | Attached to each crane as history, so the plant and the inspector see past results in one place. |
| Completed inspections and certificates | Download Report on each form or folder, from the web or the mobile app. | Old reports and load test certificates are filed on the crane they belong to. |
| List of every form | Insights, Export Forms: each form's name, ID, account, location, date created and date completed. | We use the last completed periodic per crane to set every next due date before your first day. |
| Open findings | Insights, Priorities Found: high, medium or low items with form, answer, date, resolve status and who answered. Capped at 65,000 rows, so pull it by date range. | Unresolved findings come in as open deficiencies with a severity: remove from service, repair soon or monitor. |
| Form templates | No template export documented. Download a completed report of each form type and screenshot the template, including each question's priority. | Rebuilt as checklists that branch by hoist type, with required hook, chain and rope measurements. |
| Users, teams and upcoming work | A plain list: names, roles, skills, and the inspections already booked. | Unlimited users with roles. Booked visits land on the dispatch board for each pod. |
source: InspectAll docs: Download a form or folder reportsource: InspectAll docs: Can I export my asset history?source: InspectAll docs: Insights reportssource: InspectAll: Why InspectAll (offline, API, webhooks, Zapier, portal, scheduling)source: InspectAll: Asset management (accounts, locations, areas, QR codes)
What doesn't come with it
What doesn't export, and what we rebuild
An export carries records, not the way your account is set up. Here is what to expect, and who does the work.
How your forms behave
Reports carry answers, not the form logic behind them. Which attributes open which form, each question's High, Medium or Low priority, and the risk profile roll-up are rebuilt. We keep your question wording so inspectors recognise the checklist on day one.
source: InspectAll: Overhead crane and hoist inspectionssource: InspectAll: Web app (priorities, risk profile, resolved findings)
Zaps and webhooks
Anything wired to InspectAll through Zapier or webhooks stops when InspectAll does. List each one, what it sends and where, then turn it off on switch-over day so nothing fires twice.
source: InspectAll docs: Integrate using Zapiersource: InspectAll: Why InspectAll (offline, API, webhooks, Zapier, portal, scheduling)
Plant contacts' portal access
Customers who log in to InspectAll's portal to see completed inspections and findings get new access. In Fieldproxy that is a portal scoped to their own sites, or a link with no login for one report or quote. Tell them before the first report arrives from the new system.
source: InspectAll: Why InspectAll (offline, API, webhooks, Zapier, portal, scheduling)
Large history pulls
The Priorities Found report stops at 65,000 rows, and the Asset History Report includes completed forms only. Pull long histories in date ranges and close or delete drafts first, so nothing you need is left behind.
source: InspectAll docs: Insights reportssource: InspectAll docs: Can I export my asset history?
Do these before you cancel InspectAll
- Read your InspectAll agreement for the renewal date and notice period, and get anything unclear in writing.
- Run the Asset History Report for every crane and hoist, after completing any open forms, and keep the PDFs.
- Run Export Forms and Priorities Found from Insights, in date ranges small enough to stay under the row cap.
- Download every load test certificate and the last periodic report for each crane.
- Ask InspectAll for a CSV of accounts, locations, areas and assets, or pull them through the API.
- Screenshot each form template, including question priorities, and list every Zapier zap and webhook.
- Tell plant contacts where reports and certificates will live from the switch-over date.
Send us your InspectAll export and see it running in your setup.
Get DemoLive within a day
The move from InspectAll, day by day
Migration to Fieldproxy is free and assisted: our team builds your setup and moves your data. You're live within a day, meaning your first team runs real jobs in Fieldproxy the day after the call. How fast everyone else follows is your call.
Live within a day means your first pod runs real work the day after the call. It isn't a deadline for the whole company. A messy asset list or many custom forms add setup time, and we tell you that on the first call.
What happens on go-live day- 1
Before the call: dates and exports
You, about an hour
Find your renewal date. Run the Insights reports and a few Asset History Reports, and ask InspectAll for the asset file. Pick the first pod to move, ideally one that has just finished its periodic cycle. - 2
The call: one crane, inspection to paid invoice
You and Fieldproxy, 30 minutes
Walk us through a periodic inspection that found a worn hook, the quote, the plant's approval, the repair, the load test and the invoice. Send your exports, a few finished reports, a certificate and your price list. - 3
We build your crane register and checklists
Fieldproxy's team
Customer, site, bay, crane and hoist records with service class and jurisdiction. Checklists that branch for electric or manual and rope or chain hoists, with required measurements. Deficiency, tag-out and load test records, and your report and certificate layouts. - 4
We move your data, free
Fieldproxy's team and Fieldproxy AI
Customers, sites, cranes and hoists mapped and checked for duplicates. Past reports and certificates filed on each crane. Every crane's next due date set from its last completed periodic, and open findings loaded as deficiencies. - 5
We connect the books
Fieldproxy's team, with your bookkeeper
Two-way sync with QuickBooks Online, Desktop or Enterprise, Xero, or Sage, agreed and tested on real invoices. Stripe for payment links and Tap to Pay in the field. - 6
Live: the first pod on Fieldproxy
Day one
One coordinator's pod books, inspects, quotes and invoices its new work in Fieldproxy, offline inside plants if needed. You compare the first reports with InspectAll's and we fix any gap while you watch. Everyone else stays on InspectAll for now. - 7
Pod by pod, then switch off
Your schedule
Move the next pod when the last is settled, each after its periodic cycle. When the last pod has moved and the final reports are saved, switch InspectAll off on the date you set.
Cutover
Running InspectAll and Fieldproxy side by side
For a short, dated window, both tools are open. Fieldproxy is there to replace InspectAll, not to sit on top of it, so the rules below are about ending the overlap cleanly. Our view from moves we have run, not a sourced fact.
Split by pod and customer, not by crane
Each customer's cranes live in one system at a time. A pod on Fieldproxy books every new inspection there; a pod still on InspectAll stays there. No inspector fills in the same checklist twice, and no plant gets two reports.
One system owns each crane's due date and tag-outs
When a customer moves, their next due dates and any open tag-outs move with them, on one day. Until then, InspectAll stays the record. The Watcher agent flags any moved crane with no future visit.
A fixed switch-off date
Keep InspectAll readable, not in use, until the date you set: ideally after your next audit season and before your renewal. Take the final Asset History Reports that week.
The fear
What if a periodic inspection or load test is due mid-move?
It's the right worry. A missed periodic is a compliance problem for your customer and a lost visit for you. This is how the move keeps every crane's clock running.
- 1
Due dates come first
Before anything else, we build the list of every crane's last completed periodic from the Export Forms report, and set each next due date. You check the list before day one. - 2
Move after the cycle, not during it
Plant shutdowns and year-end periodics drive the calendar. Each pod moves in a quiet stretch, so nothing scheduled falls between two systems. - 3
History is on the crane before the visit
Past reports, certificates and open findings are filed on each crane before its first Fieldproxy inspection, so the inspector sees last year's hook throat reading and the open deficiency. - 4
Open tag-outs and load tests finish where they started
A crane tagged out or waiting on a load test in InspectAll finishes that work there, unless it's simple to move. List them on the first call and we agree each one.
Where things live
InspectAll terms and where they go in Fieldproxy
So your inspectors and coordinators know where everything went on the first morning. Exact names follow your own words where they work.
| In InspectAll | In Fieldproxy |
|---|---|
| Accounts | Customers |
| Locations and areas | Sites and bays, so every crane has an address the plant recognises |
| Assets | Cranes, hoists and below-the-hook devices, each its own record with service class and next due date |
| Asset attributes that pick the form | The hoist record drives the checklist: electric or manual, rope or chain, pendant or radio |
| Forms (frequent, periodic) | Inspections: initial, frequent, periodic, idle-crane return and post-repair, with required measurements |
| Folders | Jobs that hold a visit's inspections, quotes and repairs |
| High, Medium or Low priority | Deficiency severity: remove from service, repair soon or monitor, with a photo required |
| Resolved | Deficiency status Repaired, linked to the repair job that cleared it, plus tag-out records |
| Load testing certificate report | Load test record and certificate PDF on the crane, required before a repair job closes |
| Customer portal | Client or site portal and no-login links to approve quotes, sign off and pay |
| Scheduling and dispatch | Dispatch board per pod, with tech skills, time off and a weekly hour limit |
| QR codes and barcodes | QR code per site and per crane, opening its history on the phone |
| Open API, webhooks and Zapier | Zapier, two-way QuickBooks, Xero and Sage, and an MCP server for ChatGPT, Claude and Copilot |
Straight answers
Switching from InspectAll: FAQ
How long does it take to switch from InspectAll to Fieldproxy?
How do I export my data from InspectAll?
Is migration from InspectAll free?
Can I keep InspectAll for inspections and use Fieldproxy for jobs and invoices?
Will each crane keep its due date and load test certificates?
Does Fieldproxy work with QuickBooks, Xero or Sage?
Does the app work offline inside plants and on runways?
What can Fieldproxy's AI agents do for a crane company?
Can I use ChatGPT or Claude with Fieldproxy?
Sources
Where the facts on this page come from
Every InspectAll fact links to InspectAll's own pages, opened on 19 November 2026. Features and terms change, so check the current page before you decide. More detail, with every source, is in How Fieldproxy is set up for crane and hoist service companies.
- source: InspectAll: Overhead crane and hoist inspections
- source: InspectAll: About us (founded 2011, founder-owned)
- source: InspectAll: Why InspectAll (offline, API, webhooks, Zapier, portal, scheduling)
- source: InspectAll: Asset management (accounts, locations, areas, QR codes)
- source: InspectAll: Web app (priorities, risk profile, resolved findings)
- source: InspectAll: Free trial sign-up
- source: InspectAll docs: Integrate using Zapier
- source: InspectAll docs: Insights reports
- source: InspectAll docs: Download a form or folder report
- source: InspectAll docs: Can I export my asset history?
- source: OSHA 29 CFR 1910.179, Overhead and gantry cranes
- source: OSHA standard interpretation, 28 Aug 2009: rated load tests for new and altered cranes
- source: Overhead Alliance: Overhead and gantry inspections 101
Leave InspectAll without the leap. Live within a day.
A 30-minute call about how a job runs in your business, and a InspectAll export. We show you your own setup and data running in Fieldproxy before you commit.
Plan my switchFree, assisted migration. One price per company, unlimited users. Changes are a conversation.