Guide for chimney sweep and inspection companies ยท checked 17 November 2026
Chimney sweep software that treats every flue as its own inspection record
A chimney sweep sells a safe flue and proves it on paper: a sweep that clears one-eighth inch of buildup, a Level 1 report the homeowner signs, a Level 2 video scan when the house is sold or the appliance changes, and a repair quote when the camera finds a cracked tile. Most of the year is quiet and September to December is a wall of calls, so the business lives on annual recalls and on records that stand up with an insurer. This guide covers the inspection levels, what to record at every flue, and how to set the work up.
See your own jobs set up this way
A 30-minute call. We show you chimney sweep and inspection companies workflows running in Fieldproxy, built around how you work.
Short answer
Chimney sweeps mostly run on general field service software with inspection forms added: Ascora, Housecall Pro and Zoho FSM publish chimney sweep pages, and Smart Service sells per-flue records with Level 1, 2 and 3 inspection forms. What matters is whether the tool keeps one record per flue and appliance, forces the right NFPA 211 inspection level from the reason for the visit, stores the video scan and a signed report, and recalls the customer a year later. Fieldproxy is one option. Best for processes that don't fit a template, set up for you: each flue holds its liner, appliance, last inspection level and findings, and the field app builds the signed report from what the tech photographs and says.
1/8 inch
Creosote or soot buildup at which CSIA's Level 1 procedure says to sweep, or recommend sweeping
Level 2
The NFPA 211 inspection called for on sale or transfer of a property, before relining, and after a chimney fire, and it needs a video scan of every flue
48 CEUs
Continuing education a CSIA Certified Chimney Sweep needs across a three-year cycle to renew without retesting
source: CSIA, Becoming a Certified Chimney Sweep (review, exam, three-year cycle, renewal by CEUs)
25%
Share of 2014 to 2018 home heating fires where failure to clean was the leading factor, per NFPA figures quoted by Portland Fire
How a job runs
One chimney sweep job, from first call to paid
The order the work really happens in, and what has to be written down at each step so nothing is argued about later.
- 1
Take the call and sort it by the reason for the visit
The reason decides the work and the price: annual sweep and inspection, a house sale (the buyer's agent wants a Level 2), a new stove or insert going in, a chimney fire or smoke in the room, a leak, an animal, or an insurer's letter. Ask what burns (wood, gas logs, pellets, oil, a gas furnace on a shared flue), how many flues the house has, and whether the fireplace is masonry or a factory-built metal box. Write the reason on the job, because it sets the inspection level.
- 2
Pick the inspection level from NFPA 211's table
NFPA 211 Chapter 15 sets a minimum level by circumstance. Level I covers the annual inspection, routine cleaning and swapping an appliance for a similar one. Level II covers a new appliance or a different fuel, relining, sale or transfer of the property, and any malfunction or event likely to have damaged the chimney. Level III is for when a Level I or II finds a hazard that cannot be evaluated without opening concealed areas. If the circumstances need Level II and the customer books Level I, say so on the quote.
- 3
Protect the house and look before you sweep
Lay the drop cloth, disconnect the appliance from the chimney, and look up the flue with a light before a brush touches it. CSIA's procedure says to note the volume and nature of the deposits, and if there are signs of a chimney fire, to photograph and document the findings before sweeping and recommend a Level 2. If the client declines, write that on the job sheet.
- 4
Sweep, then scan
Sweep from the bottom or the top with tools that will not damage the liner, and listen for odd sounds that suggest a separation. Then scan. On a Level 2, NFPA 211 requires examination of all flue liners with image scanning equipment or something better, and a flashlight or mirror is not enough. Save photos with the date and the flue they belong to. If the flue has too many offsets to scan, write that down and why.
- 5
Check the appliance, connector, clearances and the top
Look at door gaskets, baffles, glass, dampers and grates; the connector's thickness, rise and thimble joint; wall pass-through clearance; floor protection (18 inches beyond a wood stove unless the listing says otherwise); and for unlisted appliances the usual 36 inch clearance to combustibles. Then the top: crown, flashing, cricket, cap, flue size and termination height. On a Level 2, go into the attic, basement and crawl space too, and note any area you could not reach.
- 6
Write the report in front of the customer and get a signature
CSIA's procedures say to discuss the findings, give the client a copy and get a signature, because without one it is hard to prove you told them. Keep the report in a permanent filing system. Findings that need repair go on the report as defects with a photo each, and the report says whether the chimney is fit for use as is, fit with repairs, or not to be used until fixed.
- 7
Quote the repair from what the camera found
A cracked liner, a missing crown, failed flashing, a bad cap, a missing thimble seal, spalled brick or an undersized flue becomes a quote line with its photo. Sweeping and reporting are one job; repair and relining are another, and some states regulate them differently. Connecticut, for example, requires a Home Improvement Contractor registration for repairs but not for a standard sweep.
- 8
Do the repair or reline with the right permit and listing
Relining a masonry chimney for mechanical appliances needs a lining system that is serviceable and sized for the appliance, usually a listed stainless liner, and often a mechanical permit. Record the liner make, model, listing, diameter, length and whether it is insulated, plus the appliance it serves and its size requirements.
- 9
Invoice, hand over the proof and set the recall
Send the invoice and the signed report with the video clip. Then set the next annual visit from the date of this one and the fuel burned: wood users are recalled for fall, gas users for any season. Record the recall date on the flue, not on the customer, so a two-flue house keeps two dates.
What to record
The fields every chimney sweep job should capture
Per property and per flue
- Property: address, owner, tenant or owner-occupied, how many chimneys, how many flues in each
- Chimney: masonry or factory-built, number of flues, height from the base of the liner, roof access (walkable, steep, no access), crown condition, flashing, cricket, cap type, termination height
- Flue: liner type (clay tile, stainless, cast-in-place, none), measured inside dimensions, offsets and their angle, connected appliance or fireplace, fuel, last Level inspected and date
- Appliance: make, model, listing and EPA certification label, door gasket, baffles, glass, damper, grate, catalytic combustor, hearth size and floor protection
On every visit
- Reason for visit and the NFPA 211 level that reason calls for, level actually completed, and the reason if a higher level could not be completed
- Deposit type and amount found (powder, hard flaking, glazed), whether it passed or beat 1/8 inch, and whether the flue was swept
- Photos and video clips, each tied to a date and a flue; attic, basement and crawl space areas inspected or the reason they were not
- Smoke or draft test result where performed, CO alarm present and tested, and any fire damage, water entry or animal found
Paper trail that protects you
- Signed inspection report with the customer's signature, date and the findings they were told about
- Recommendations the customer declined, with the date and what you said the risk was
- Repair quote, approval, permit number and final inspection, plus liner and cap serial or listing numbers
- Technician's CSIA certification and expiry, and the training dates behind it
Rules and standards
The rules that shape the work, with their sources
| Rule | What it means on the job |
|---|---|
| NFPA 211 Chapter 15 inspection levels | A table selects the minimum level by circumstance. Level I: annual inspection, routine cleaning, replacing an appliance with a similar one. Level II: new or dissimilar appliance, before relining, on sale or transfer of the property, after a malfunction or external event likely to have caused damage. Level III: where a hazard is suspected and cannot be evaluated without access to concealed areas. If a higher level cannot be completed, the inspector records the level done and why. source: NFPA 211 Chapter 15 text (Committee Input No. 9, 2026 revision cycle), Table 15.2.1 Selection of Inspection Type |
| Level II needs image scanning of every flue | NFPA 211 (2024) 15.4.2.3 says a Level II inspection includes the internal surfaces of all flue liners, with image scanning equipment or more advanced viewing used as necessary. The committee wrote that "other means" was never meant to include a flashlight or mirror. source: Structure Tech, Do you need a camera to perform a Level II chimney inspection? (quotes NFPA 211 (2024) 15.4.2.3 and the committee rationale) |
| Annual inspection and cleaning when deposits are found | NFPA 211 Chapter 14, as quoted by a fire district: chimneys, fireplaces and vents shall be inspected at least once a year for soundness, freedom from deposits and correct clearances, with cleaning, maintenance and repairs done if necessary. Cleaning is needed whenever measurable deposits of creosote or other combustible material are found. source: Mi-Wuk Sugar Pine Fire Protection District, Chimney Maintenance (quotes NFPA 211 Chapter 14 annual inspection language) |
| CSIA sweep threshold | CSIA's Level 1 procedure says to sweep, or recommend sweeping, any chimney with 1/8 inch or greater buildup. It also says to confirm no blockage by seeing out the top of the flue, which can need a brush pass or camera on a flue with offsets. source: CSIA, Standard Operating Procedure: Level 1 Inspection, Masonry Chimney Attached to a Building Heating Appliance (rev. 4/5/19) |
| NFPA 211 is a standard, not automatically law | CSIA's procedures say a chimney should conform to the locally adopted code, that sweeps should know the local rules and where they differ from NFPA 211, and that where there is no local code some sweeps use NFPA 211 as their standard. source: CSIA, Standard Operating Procedure: Level 1 Inspection, Masonry Chimney Attached to a Building Heating Appliance (rev. 4/5/19) |
| Chimney height (IRC R1003.9) | A masonry chimney must extend at least 3 feet above the highest point where it passes through the roof and at least 2 feet above any part of the building within 10 feet, and the greater result controls. Check the edition your jurisdiction adopted. source: Jaspector, IRC 2024 R1003.9 chimney height (3 feet above the roof penetration, 2 feet above anything within 10 feet) |
| Relining for mechanical appliances (IRC M1805.3) | When an existing masonry chimney is reused for new mechanical equipment, it must be inspected and the lining must be serviceable and sized for the appliance. A flexible stainless liner sized to the fuel gas code with insulation in cold climates is the common method, usually with a cleanout and a listed cap, and often a mechanical permit. source: Jaspector, IRC 2024 M1805.3 relining existing masonry chimneys for mechanical appliances |
| Masonry fireplace clearances (2012 IRC R1001.11) | Combustible framing needs 2 inches from the front faces and sides and 4 inches from the back of a masonry fireplace, unless the unit is listed for contact. Hearth extensions are at least 16 inches in front and 8 inches beside the opening, or 20 and 12 when the opening is 6 square feet or more. source: State of Connecticut, Masonry Chimneys and Fireplaces trade show slides (2012 IRC Chapters 10 and 11) |
| EPA wood heater standards | EPA's Step 2 limits applied to new wood heaters from 15 May 2020. The rule does not affect units already in homes and does not replace state or local rules on use. A sweep servicing an older stove is working on a legal unit; what you check is its clearances and condition. source: US EPA, Final Standards of Performance for New Residential Wood Heaters fact sheet (11 Mar 2020; Step 2 from 15 May 2020, existing units not affected) |
| Who needs a licence varies by state | Connecticut says a standard sweep does not need registration, but anyone repairing a chimney (cap, liner, mortar) must hold an active Home Improvement Contractor registration, and sweeps cannot perform repairs under a sweep-only business. Check your own state before adding repair. source: Connecticut Department of Consumer Protection, Get Your Chimney Cleaned but Be Cautious of Chimney Sweep and Repair Scams (3 Nov 2025) |
| Fall protection on roofs | OSHA's construction rule requires protection for employees on a surface with an unprotected edge 6 feet or more above a lower level. Roof work on repair, relining and crown jobs falls under it; check with OSHA or your state plan which standard covers sweeping from the roof. source: eCFR, 29 CFR 1926.501 Duty to have fall protection (6 feet or more above a lower level) |
| UK: HETAS Chimney Sweeping Code | HETAS registered sweeps must risk-assess, inspect the flue before and after sweeping, and carry out smoke testing and check CO alarms as part of the assessment. Vacuum-only or chemical-only cleaning is not acceptable under the code, and sweeps are advised not to touch asbestos closure plates. source: HETAS, Chimney Sweeping Code (Nov 2024): risk assessment, before and after inspection, smoke test, CO alarm, no vacuum-only or chemical-only cleaning |
| Canada: WETT inspections and insurers | WETT Inc. says there is no legal requirement in Canada for an inspector to be WETT certified, but insurers commonly require a wood-burning appliance to be inspected and cleared, which is why a WETT report matters on a sale or an insurance renewal. source: Isure Insurance, What is a WETT Inspection for your home? (26 Jan 2026) |
Rules vary by state, council and contract. Checked 17 November 2026; confirm against the source for your area before relying on it.
Numbers
Which NFPA 211 level a job calls for
NFPA 211 Chapter 15 gives a minimum level by circumstance, and the sweep can always go higher. Use this to set the level on the quote and to explain to a customer why the cheap visit will not do.
| Circumstance | Minimum level | What it must include |
|---|---|---|
| Annual inspection, or routine cleaning of a flue | Level I | Readily accessible parts of the chimney and accessible parts of the appliance and connector; flue checked for combustible deposits and blockage |
| Replacing an appliance with one of similar type, input and efficiency | Level I | Same as above, for the flue and appliance concerned |
| New appliance, different fuel, or an appliance of dissimilar type, input or efficiency | Level II | Level I plus accessible attic, crawl space and basement areas, flue size and suitability, and image scanning of all flue liners |
| Sale or transfer of the property | Level II | Same as above; a buyer's home inspector usually does not do this |
| Before relining or replacing a flue lining | Level II | Same as above, so the new liner is sized for what the scan found |
| Chimney fire, flood, earthquake or other event likely to have caused damage | Level II | Same as above; document before sweeping and escalate to Level III if a hazard cannot be evaluated |
| A hazard suspected from Level I or II that cannot be assessed without opening concealed areas | Level III | Level II plus removal of parts of the building or chimney, only as needed to reach the areas in question |
source: NFPA 211 Chapter 15 text (Committee Input No. 9, 2026 revision cycle), Table 15.2.1 Selection of Inspection Typesource: Chimney Care Plus, The Three Levels of Inspectionsource: CSIA, Standard Operating Procedure: Level 2 Inspection, Masonry Chimney Attached to a Building Heating Appliance (rev. 4/5/19)
Where it breaks
Where spreadsheets and generic software fall over
The record is one job per customer, but a house has three flues
Keep a flue record under each chimney: liner, size, appliance, fuel, last level inspected and findings. The fireplace, the furnace vent and the stove each get their own recall date and report section.
The wrong inspection level gets booked and sold
Make the reason for the visit a required field that sets the level. A sale, new stove or relining books a Level II with a video scan and attic access, and the quote says why.
Photos and video live on a phone and disappear
Capture photos and clips inside the job, tagged with date and flue, so the report, the repair quote and a claim a year later all pull the same images.
September to December breaks the calendar
Generate next year's recalls when this year's job closes, spread them by route and fuel, and let the customer pick a window from a link instead of phone tag. Hold emergency slots for smoke calls and chimney fires.
A declined recommendation is not written down
Add a field for declined findings with a signature box and a plain risk sentence, and carry the declined items into next year's job so the tech starts with them.
Repairs mix with sweeping and quotes go out with no proof
Turn every defect on the report into a quote line with its photo and liner or cap specification, and track the quote through approval, permit, install and final check as its own job.
Checklist
The chimney sweep operations checklist
Print it, or hand it to whoever runs the office side.
- Reason for visit is a required field and sets the NFPA 211 level
- Every chimney has a record per flue, with liner type and measured dimensions
- Every appliance has make, model, listing label and fuel recorded
- Level 2 jobs require a video scan and attic, crawl space and basement notes, or a written reason they were skipped
- Pre-sweep and post-sweep photos are required for each flue
- Deposit type and amount are recorded, with a flag when it reaches 1/8 inch
- Chimney fire signs are photographed before sweeping and a Level 2 is recommended on the job
- The report is signed by the customer, and declined recommendations are recorded
- Defects convert into repair quotes with photos attached
- Repair and relining jobs hold permit, liner listing and final inspection
- Technician certifications and expiry dates are tracked, with a warning ahead of lapse
- Annual recalls are generated per flue from the last completed job and the fuel burned
- Roof access, ladder and fall protection notes are on the property record
- Insurance or sale-related requests keep the report available as a PDF for the customer to forward
Software options
What software chimney sweep and inspection companies actually use
Judge each one on whether it fits the way your jobs run, not on the feature list. Bring a real job to every demo.
Ascora
Chimney and other trade contractors that want a field service system with chimney workflows
Publishes a chimney page covering scheduling, quotes to invoices, photo documentation, safety checklists, job types such as inspection, cleaning, repair and relining, and certification tracking for staff, with an offline mobile app and on-site payments.
Housecall Pro
Owner-operated and small crew sweeps that mainly want scheduling, a price book, estimates and invoicing
Chimney sweep page covers drag and drop scheduling, booking reminders, GPS dispatch, a price book that syncs to QuickBooks, estimates and invoicing. Inspection levels and per-flue records are things you would have to build with its forms.
Zoho FSM
Businesses already on Zoho that want work orders, checklists and periodic service
Chimney sweep page lists work orders, scheduling by skill and proximity, periodic maintenance, safety checklists, asset records and technician attachments including images, video and audio. You configure the inspection forms yourself.
Smart Service
Sweeps and restoration crews who want multi-flue property records
Describes each flue and appliance as its own equipment record under a customer, Level 1, 2 and 3 inspection forms completed on mobile with photos and signatures, annual recurring bookings, and QuickBooks-native billing.
Jobber
Solo sweeps and small crews that want simple scheduling, quoting and reminders
General home service software with a chimney sweep page; a good fit for basic recurring jobs and invoicing. Ask how it would hold per-flue findings and the signed inspection level.
Published prices, compared:source: Ascora, Software for chimney contractorssource: Housecall Pro, Chimney sweep softwaresource: Zoho FSM, Chimney sweep softwaresource: Smart Service, Chimney sweep software
Questions to ask any vendor
- Can I keep a separate record for each flue and appliance under one property, with its own recall date?
- Can the reason for a visit set the NFPA 211 level and require a video scan and attic notes on a Level 2?
- Where do photos and video clips live, and do they attach to the flue, the report and a repair quote?
- Can the customer sign the report on the phone, and does it record the recommendations they declined?
- Can a defect on the report become a repair quote with its photos, then a job with permit and final inspection fields?
- Can recalls be generated per flue and fuel and booked by the customer from a link during the fall rush?
Bring one real chimney sweep job. We show it running in Fieldproxy.
Get DemoHow Fieldproxy is set up for this
Chimney sweep on Fieldproxy: built around how you already work
A Fieldproxy setup for a chimney sweep is built around the flue and the reason for the visit: each property holds its chimneys, each chimney its flues, and each flue its liner, appliance, last inspection level and findings. The field app walks the tech through the right level, captures photos and video against the flue, produces a signed report on your template, and turns the defects it found into repair quotes and next year's recalls.
Module 1
Property, chimney and flue records
A house has a fireplace, a furnace vent and maybe a stove, and each needs its own history.
- Record: Property, linked to Customer, with tenant or owner-occupied, roof access, ladder length needed, pets and parking
- Child record: Chimney (masonry or factory-built, flue count, height, crown, flashing, cricket, cap) with photos
- Child record: Flue (liner type, measured inside dimensions, offsets, fuel, connected appliance, last level inspected, last swept, recall date)
- Child record: Appliance (make, model, listing and EPA label, gasket, baffles, damper, grate, floor protection size)
- Rule: a job can't be closed until every flue on the property is either inspected or marked not accessible with a reason
Module 2
Intake that sets the inspection level
The reason for the visit decides the level, the time and the price.
- Job type choice on every request: annual sweep, sale or transfer, new appliance or fuel, chimney fire or event, relining, leak, animal, insurer request
- Rule table: each job type maps to a minimum NFPA 211 level and a required list of attachments (e.g. Level 2 needs a video scan and attic photos)
- Quote text generated from the level, with a line explaining why a Level 2 is needed on a sale
- Booking form on your site that asks fuel, flue count and reason, so the first call is not a questionnaire
Module 3
Scheduling for the fall wall
Most of the year is quiet and September to December overflows.
- Calendar by route, crew and ladder or roof-access skill, with job length by level (e.g. Level 1: 45 minutes, Level 2: 90 minutes, tunable)
- Hold emergency slots each day for smoke calls and chimney fires, released at noon
- Block on scheduling a roof-access job without the right crew member and equipment
- Customer self-booking link with windows, SMS reminders and a re-booking link if weather cancels a roof job
Module 4
Inspection forms and the field app
The signed report is the product and the proof.
- Level 1, Level 2 and Level 3 forms built from the CSIA procedures: flue deposits, appliance, connector and pass-through, clearances, floor protection, top examination, attic, basement and crawl space
- Per-flue photo and video slots tagged with date and flue, offline capture, and a field for areas not accessible with a reason
- Deposit record: type, amount, pass or fail against 1/8 inch, and swept yes or no
- Fire-signs prompt that requires photos before sweeping and offers a Level 2 recommendation, with a declined-recommendation field
- Customer signs on the phone, and the signed PDF is stored against the property and each flue
Module 5
Findings to repair quotes
The camera finds the work; the quote has to leave the same day.
- Each defect becomes a quote line with its photo: liner crack, crown, flashing, cap, thimble, spalled brick, flue size, clearance
- Price book for repair and reline items, including liner kits by diameter and length
- Quote statuses: sent, viewed, approved, declined, scheduled; declined items carry into next year's job
- Rule: a repair job can't be scheduled until the quote is approved and, where your state needs it, the registration and permit fields are filled
Module 6
Repair, relining and masonry jobs
Repair jobs run on materials, permits and sometimes subs.
- Project record with scope, liner model and listing, diameter and length, insulation, appliance served, cap, and permit number
- Materials list tied to stock on the truck and in the shop
- Subcontractor record for mason or roofer, with insurance expiry and an approval before they are scheduled
- Final inspection step with photos of the liner top and bottom, and the cleanout and cap
- Fall protection notes and ladder or lift needs on the job before the crew is assigned
Module 7
Annual recalls and customer outputs
The business repeats every year and no one remembers to call.
- Recall date per flue, set from the last completed job and fuel (wood users in fall; gas users any season)
- Customer portal with signed reports, video clips, repair quotes and invoices, ready to forward to an insurer or a buyer
- Sale-ready PDF that lists the level inspected and flues scanned for a real estate agent
- SMS and email recall messages with a one-tap booking link
Module 8
Certifications, safety and reporting
The credential and the safe roof visit are what customers pay for.
- Technician record with CSIA certification, expiry date, CEUs earned in the cycle by category and training certificates
- Rule: a Level 2 job can only be assigned to a tech whose certification is current
- Incident log for falls, near misses and soot or CO exposure
- Dashboard: jobs by level, repair quote win rate, recalls due and booked, revenue by month, jobs with declined recommendations
The AI agents, set up for chimney sweep and inspection companies
| Agent | When | What it does | What you get |
|---|---|---|---|
| Vision agent | Tech uploads a flue photo or a frame from the video scan | Reads the image for liner cracks, gaps, missing mortar, glazed deposits and an open thimble, and fills the finding fields with a suggested severity | Draft findings on the flue record with the photo attached, for the tech to confirm before the report is signed |
| Voice agent | Tech speaks notes on the roof or in the attic | Turns the notes into the top examination, attic and clearance fields on the right flue | A completed inspection section with no typing on a ladder |
| Autopilot | A flue passes its recall date, or a repair quote has been sent and not answered | Drafts the recall or the quote chase using the last report and the declined items, in the customer's own history | A message for the office to approve, with a booking link or the quote attached |
| Watcher agent | A Level 2 job is assigned, a certification is within 60 days of expiry (e.g.), or a fire-signs flag has no Level 2 follow-up | Checks the tech's certification, flags a missing video scan or attic notes before close, and flags a flue with signs of fire and no recommendation | An alert to the owner and a block on closing the job until the missing items are added |
| Document intelligence agent | An insurer letter, a home inspection report or a buyer's agent request arrives as a PDF | Reads the request, picks out the property, the level asked for and any flagged defects, and matches it to the flue records | A job at the right inspection level, with the document attached and a quote line for each flagged item |
Straight answers
Chimney sweep: FAQ
What software do chimney sweep and inspection companies use?
Most use general field service software with inspection forms: Ascora, Housecall Pro and Zoho FSM publish chimney sweep pages, Smart Service sells per-flue records with Level 1, 2 and 3 forms, and Jobber is used by solo sweeps for scheduling and invoicing. The test is whether the tool keeps a record per flue, sets the NFPA 211 level from the reason for the visit, stores video and photos with the flue, and recalls customers a year later.
What are the three levels of chimney inspection?
NFPA 211 Chapter 15 defines Level I (readily accessible parts of the chimney and appliance, used for annual inspections and routine cleaning), Level II (adds accessible attic, crawl space and basement areas and image scanning of every flue liner, used for new appliances, relining, sale or transfer and after events), and Level III (removal of parts of the building or chimney to reach concealed areas when a hazard is suspected).
Do you need a camera for a Level 2 chimney inspection?
Yes. NFPA 211 (2024) says a Level II inspection includes the internal surfaces of all flue liners with image scanning equipment or a more advanced viewing system, and the committee said that "other means" was never meant to be a flashlight or mirror. CSIA's Level 2 procedure also requires a video scan and says to note when it is not possible, for example because of size or multiple offsets.
When is a chimney swept?
CSIA's Level 1 procedure says to sweep, or recommend sweeping, any chimney with 1/8 inch or more of buildup. NFPA 211's maintenance chapter, as quoted by fire districts, calls for an annual inspection and cleaning whenever measurable deposits of creosote or other combustibles are found.
Do I need a licence to sweep chimneys?
It depends on the state. Connecticut says a standard chimney sweep does not require registration, but anyone repairing a chimney needs a Home Improvement Contractor registration. Rules differ elsewhere, so check your state's contractor board. Certification from CSIA or the National Chimney Sweep Guild is voluntary but is what homeowners are told to look for.
How does a chimney sweep get certified?
A CSIA Certified Chimney Sweep completes a review and passes the CCS exam, and the credential runs on a three-year cycle. Renewal is by a review and retest, by 9 to 47 CEUs and a retest, or by 48 CEUs across set categories including 12 technical and 8 codes and standards. CSIA's page shows an annual payment of $249 for the first two years of the cycle.
Why did my insurer or the buyer ask for a Level 2?
NFPA 211 calls for a Level II inspection when a property is sold or transferred, when a new or different appliance is added, before relining, and after an event likely to have caused damage. The routine yearly sweep is Level I and does not look inside every flue with a camera. In Canada, insurers commonly ask for a WETT inspection report on wood-burning appliances.
What does a chimney sweep record on each visit?
At minimum: the reason for the visit, the inspection level completed, the deposits found and whether the flue was swept, the appliance and connector condition, clearances, the top examination, photos or video tied to each flue, areas that could not be reached, and a signed report listing recommendations and any the customer declined.
Does Fieldproxy have chimney sweep templates?
No fixed template. Fieldproxy is set up around how your business runs: chimney and flue records, the NFPA 211 level logic, your inspection forms and signed report, repair quotes from findings, and recalls per flue. It works offline in the field app and syncs to QuickBooks or Xero.
Related guides
All sources on this page (24)
- source: CSIA, Standard Operating Procedure: Level 1 Inspection, Masonry Chimney Attached to a Building Heating Appliance (rev. 4/5/19)
- source: NFPA 211 Chapter 15 text (Committee Input No. 9, 2026 revision cycle), Table 15.2.1 Selection of Inspection Type
- source: CSIA, Becoming a Certified Chimney Sweep (review, exam, three-year cycle, renewal by CEUs)
- source: Portland Fire and Rescue, Chimney and Wood Stove Safety (quotes NFPA: 48,530 heating fires a year 2014 to 2018, 25% failure to clean)
- source: Structure Tech, Do you need a camera to perform a Level II chimney inspection? (quotes NFPA 211 (2024) 15.4.2.3 and the committee rationale)
- source: Mi-Wuk Sugar Pine Fire Protection District, Chimney Maintenance (quotes NFPA 211 Chapter 14 annual inspection language)
- source: Jaspector, IRC 2024 R1003.9 chimney height (3 feet above the roof penetration, 2 feet above anything within 10 feet)
- source: Jaspector, IRC 2024 M1805.3 relining existing masonry chimneys for mechanical appliances
- source: State of Connecticut, Masonry Chimneys and Fireplaces trade show slides (2012 IRC Chapters 10 and 11)
- source: US EPA, Final Standards of Performance for New Residential Wood Heaters fact sheet (11 Mar 2020; Step 2 from 15 May 2020, existing units not affected)
- source: Connecticut Department of Consumer Protection, Get Your Chimney Cleaned but Be Cautious of Chimney Sweep and Repair Scams (3 Nov 2025)
- source: eCFR, 29 CFR 1926.501 Duty to have fall protection (6 feet or more above a lower level)
- source: HETAS, Chimney Sweeping Code (Nov 2024): risk assessment, before and after inspection, smoke test, CO alarm, no vacuum-only or chemical-only cleaning
- source: Isure Insurance, What is a WETT Inspection for your home? (26 Jan 2026)
- source: Chimney Care Plus, The Three Levels of Inspection
- source: CSIA, Standard Operating Procedure: Level 2 Inspection, Masonry Chimney Attached to a Building Heating Appliance (rev. 4/5/19)
- source: Ascora, Software for chimney contractors
- source: Housecall Pro, Chimney sweep software
- source: Zoho FSM, Chimney sweep software
- source: Smart Service, Chimney sweep software
Run chimney sweep and inspection work the way it actually runs.
A 30-minute call. We set up one of your real jobs in Fieldproxy so you can judge it on your own work.
Get a walkthroughOne price per company. Unlimited users.